Propane Adapter Fitting - 1/4" Female Inverted Flare x 1/4" Male NPT

See what our Experts say about this JR Products Propane Fittings

• Will MB Sturgis Horizontal 2-Stage Propane Regulator Work With Class B Motorhome
  The MB Sturgis Horizontal 2-Stage Propane Regulator # 108221 is an excellent choice for a propane regulator! This works directly with your propane pigtail if you have a 1/4" Male NPT fitting. If you have the inverted fitting then you'll need the Adapter # 37207-30035 for the inlet side of the regulator.
  view full answer...
• Adapter Needed To Go From 1/4" Male Inverted Flare Fitting To 1/4" Male NPT Fitting
  If you're looking to go from a 1/4" male inverted flare fitting to a 1/4" male NPT fitting then you could use the Propane Adapter Fitting # 37207-30035. If this is not what you're looking for then I'll need to know the size and fitting type you're trying to connect to. I've also attached a little guide below that explains each fitting type if you're not too familiar with RV propane.
  view full answer...
• Propane Hoses Needed to Go From 100 lb. Propane Tank Through Regulator to Trailer Supply Lines
  You will need 2 separate hoses, one from the 100 lb. tank to the regulator and one from the regulator to the supply lines. The MB Sturgis Propane Pigtail Hose # 100019-36 (3 ft.) will go from the 100 lb. propane tank to the regulator using the Propane Adapter Fitting # 37207-30035. We do not have a hose that fits what you are needing from the regulator to the supply pipes. The typical set-up on a travel trailer is 3/8", I recommend that you verify you have 1/2". If you do, you will need...
  view full answer...
• What GasStop Kit Do I Need to Add Shut-Off Valves to a Dual Propane Tank Setup
  For your application you're going to need the GasStop Emergency Propane Shut-Off Valve Gauges w/ GasGear 12" Propane Hoses # GS49FR. This comes with 2 of the GasStop valve/gauges and 2 pigtails that tie into a dual regulator like the MB Sturgis # 888001-MBS. Please note that the pigtails come with 1/4" male inverted flare outlet fittings so if your regulator doesn't have adapters where the pigtails connect to it you'll also need 2 of the Adapter Fitting # 37207-30035 which you'll want...
  view full answer...
• Recommended 18 Inch POL to 1/4 Inch NPT Propane Hose
  I do have an option for you but the only hose we offer with these fittings (POL x 1/4" Male NPT) is the MB Sturgis Propane Supply Hose part # 100202 which is 10'. That said, if this is going from the tank to the regulator then you should be able to use the MB Sturgis Propane PigtailHose part # 100019-24 with the Propane Adapter Fitting part # 37207-30035 which is 2'.
  view full answer...
• Replacement Pigtail Hose With 1/4" NPT Fitting For An Old Accuflex 454-04 1/4" NPT Pigtail
  The MB Sturgis Propane Pigtail - Stainless Overbraid - Type 1 x 1/4" Male Inverted Flare - 15" # 100833-15 is an 1/4" inverted flare tip and your regulator requires a standard 1/4" NPT fitting. You just need a pigtail like Propane Hose with Back Check - Type 1 x 1/4" Male NPT - 15" # 37207-30855. I've attached our help guide article below which goes over all of the different propane fitting types and offers a ton of additional information. I've also attached a picture of a NPT and MIF...
  view full answer...
  
• 15" Hose For 100 lb Propane Tank With POL Fitting & 1/4" Male NPT Fitting
  We do have an option for you, though the # 100473-15-MBS has a Type 1 fitting one one end and 1/4" Male NPT fitting on the other; the Type 1 fitting does not connect to a 100 lb propane tank, as those tanks have a POL fitting. Though there are no tanks with a Male POL fitting and 1/4" Male NPT fitting, you can use an adapter to get exactly what you need, with the correct parts being the following: - MB Sturgis Sturgi-Stay Propane Fill Hose - POL Pigtail x 1/4" Male Inverted Flare - 15"...
  view full answer...

Do you have a question about this Propane Fitting?