Will MB Sturgis Horizontal 2-Stage Propane Regulator Work With Class B Motorhome

Question

Question:

Would the MB Sturgis 108221 propane regulator work on my 2008 RoadTrek Adventurous? Thank you!

asked by: Sarah M

0

Expert Reply:

The MB Sturgis Horizontal 2-Stage Propane Regulator # 108221 is an excellent choice for a propane regulator! This works directly with your propane pigtail if you have a 1/4" Male NPT fitting. If you have the inverted fitting then you'll need the Adapter # 37207-30035 for the inlet side of the regulator.

expert reply by: Jon G

0

Answer 1

The MB Sturgis Propane Pigtail - Stainless Overbraid - Type 1 x 1/4" Male Inverted Flare - 15" #100833-15 is an 1/4" inverted flare tip and your regulator requires a standard 1/4" NPT fitting. You just need a pigtail like Propane…

view full answer...

Answer 2

I looked up the specs of the Fairview GR-9959 and they do have the same fittings so you an use the MB Sturgis Horizontal 2-Stage Propane Regulator #108221 as a replacement. Both have the 1/4" female NPT inlet and 3/8" female NPT outlet. I…

view full answer...

Answer 3

Depending on the piping is on your propane system you can use a horizontal or vertical regular. Basically just what fits in the space most conveniently. So you could use the MB Sturgis Horizontal 2-Stage Propane Regulator - 11" Water Column…

view full answer...

Answer 4

We do not have a pigtail hose that is larger than the 1/4 inch, which is the standard size, and the Winntec 6020 is honestly something I would replace, as it has been recalled in the past. Due to this and the hoses not being available, I highly…

view full answer...

Answer 5

For a 60 inch long propane supply hose we offer the Camco Propane Supply Hose with ACME Nut and Male Inverted Flare, 60 Inches #CAM59193. I have attached a review video of this product for you. The Propane Supply Hose with ACME Nut and Male NPT, 20…

view full answer...

Answer 6

Whether or not the Camco Propane Supply Hose - ACME Nut x Male Inverted Flare - 60" Long #CAM59193 is going to work for your propane tank is going to be completely based on the connections for your propane tank. The ACME-type 1 fitting is used…

view full answer...

Answer 7

It sounds like you have the Propane Adapter Fitting - 1/4" Female Inverted Flare x 1/4" Male NPT, #37207-30045. This fitting lets you connect your propane cylinder to your regulator with an inverted flare pigtail. It also has an internal…

view full answer...

Answer 8

If your trailer is like most then you will not need another regulator. Take a look at the plumbing currently attached to your 30 pound tanks. You should find a short standard propane hose running from one propane tank to the changeover valve, and…

view full answer...

Answer 9

The Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks, part #CAM59005 has two 1/4 inch NPT fittings and one 3/8 inch NPT outlet fitting, and will not work with the Camco Propane Hose Assembly, part #CAM59825, but I do have a…

view full answer...

Answer 10

I do have an option for you but the only hose we offer with these fittings (POL x 1/4" Male NPT) is the MB Sturgis Propane Supply Hose part #100202 which is 10'. That said, if this is going from the tank to the regulator then you should be…

view full answer...

Answer 11

The 4 holes in the back of the MB Sturgis #108220 2-stage regulator are indeed for mounting. The holes aren't threaded but the metal is soft enough that a #8 1/4 inch machine screw would cut threads perfectly into it.

view full answer...

Answer 12

The inlet side of the MB Sturgis Horizontal 2-Stage Propane Regulator #108221 that you referenced is the larger end with the black top and the outlet is the bottom side. Basically it needs to mount pointing down like the picture I attached.

view full answer...