Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr

See what our Experts say about this Camco Propane Fittings

• Adapter Fitting Needed To Connect A Regulator To A Propane Tank
  Typically a POL fitting will connect to your RV's propane tank and RV regulators normally have a 1/4" NPT inlet so the Propane Tank Connector Fitting - Soft Nose POL x 1/4" Male NPT # 37207-30075 you were already looking at would be the correct adapter fitting. If you have a different fitting type on your regulator or propane tank and can't identify them then please send in some pictures and I can identify them for you. You are going to want to ensure that the vent on your regulator is...
  view full answer...
• Recommended Regulator For 100 Pound Propane Tank Powering A 45,000 BTU Furnace
  If you are using a 100 pound propane tank, you will want to use the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr # CAM59333. This regulator has the P.O.L. fitting which is used on 100 pound propane tanks so connecting will be quick and easy. This is also a 2 stage regulator which makes for a smooth, consistent flow of gas.
  view full answer...
• Propane Regulator Compatible with Tankless Water Heater 157,000 BTU
  You can use a propane tank for the BTUs needed and simply use the appropriate fittings and regulator. For the regulator, I recommend the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr # CAM59333 you referenced which has an 11 inch water column. If you don't have the POL fitting, then I recommend the Camco Vertical 2-Stage Propane Regulator - 160,000 Btu/Hr # CAM59313 or the horizontal 2-Stage # CAM59323 which can use the MB Sturgis Propane Pigtail - Type 1 x 1/4"...
  view full answer...
• Can Camco Horizontal 2-Stage Propane Regulator CAM59333 be Used with 100 Pound Propane Tank
  Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr Item # CAM59333 will maintain a constant 11 inch water column of pressure. It can be used with other regulators as long as they are rated the same. The Camco regulator has the P.O.L. fitting which is used on 100 pound propane tanks like yours.
  view full answer...
• Recommendation For Propane Regulator And Propane Hose For 100 Gallon Propane Tank
  What you need will depend on what you have. For a regulator, I recommend the Camco Horizontal 2-Stage Regulator, Item # CAM59333, or the Camco Vertical 2-Stage Regulator, Item # CAM59313. If your 100 gallon tank is an ASME that is generally installed in a motorhome then you will need a horizontal regulator like Item # CAM59333. If the tank is not installed in a motorhome then you will likely need a vertical regulator like Item # CAM59313. Both regulators maintain a constant 11 inch w.c....
  view full answer...
• Automatic Changeover Propane Regulator for Camper
  The Camco Automatic Changeover Propane Regulator part # CAM59005 would be a great regulator option that will automatically switch between the two tanks of your setup.
  view full answer...
• Regulator Recommendation for 100 lb Propane Tank
  The Camco Horizontal 2-Stage Propane Regulator # CAM59333 would work well for you as it has the standard 1/4" NPT inlet and 3/8" NPT outlet like what a 100 lb propane tank would have and would need to feed the stove and gas lights you mentioned. I attached a picture that shows what it looks like installed on a 100 lb tank as well.
  view full answer...
  
• Can Camco Propane Regulator for POL Connectors be Used on 40 Pound DOT Tank
  As long as your tank has the threads on the inside of its connector the Camco regulator # CAM59333 works for you. Also, make sure the hose going out of the regulator is a 3/8 inch MPT. The 12 feet isn't an issue. Keep in mind the POL connector on this regulator is a left hand thread.
  view full answer...
  
• Which Way To Mount Camco Horizontal 2-Stage Propane Regulator
  The main vent on second regulator is the one that needs to face down on the the Camco Horizontal 2-Stage Propane Regulator part # CAM59333. The small pin hole on the first regulator can face up, it's just a pressure relief valve.
  view full answer...
• Could Camco Horizontal 2-Stage Propane Regulator # CAM59333 Fit 1998 Coleman Natchez
  The Camco Horizontal 2-Stage Propane Regulator # CAM59333 that you referenced works for nearly all RV applications as it will provide 11 water column pressure like basically all RVs need.
  view full answer...
• Which Regulator Should I Use With My 100lb Propane Tank To Power My Gas Fireplace?
  In order to use your 100lb propane tank with refill valve to fuel your fireplace you will want to check if you need a horizontal or vertical regulator. Vertical regulators are mounted upright and have the vent on the bottom, while the horizontal regulators are mounted sideways with the vent on the side of the regulator facing down. For vertical, go with MB Sturgis Vertical 2-Stage Propane Regulator - 11" Water Column Outlet # 108220 with MB Sturgis Hose Assembly # 100202. For horizontal,...
  view full answer...
• Propane Regulator Availability for a 1998 Coleman/Fleetwood Santa Fe
  The picture you submitted did not make it through. Without knowing what it looks like its hard for me to say what would work for you. I did attach a link to a page that has all of the regulators we offer for you to check out. Hopefully one of the ones we carry is the same as what you are looking for.
  view full answer...
• Does Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks CAM59005 Fit POL
  Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks Item # CAM59005 uses a 1/4" SAE inverted flare for the inlet and a 3/8" NPT female for the outlet. To use it with POL fittings an adapter or hose would be needed. I have linked the fitting adapters we have below. We do have regulator # CAM59333 which does connect to a POL but it is not an automatic changeover type of regulator.
  view full answer...
• Recommended Replacement for a Marshall 290-1 Regulator
  Hey Kevin, to replace your Marshall 290-1 regulator you can use the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L # CAM59333 or you can use the # CAM59313 for a vertical regulator replacement. Both of these regulators are 2 stage, rated for 160,000 Btus, and maintains a constant 11" w.c propane pressure.
  view full answer...
• Hose For Camco Horizontal 2-Stage Propane Regulator w/ P.O.L CAM59333
  The hose is going to depend on what you are using the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr # CAM59333 with. It has a POL fitting for the tank, and for the hose, one end will be 3/8" Male NPT to connect to the regulator, and the other end will depend on the fitting you need for your appliance. For example if you needed a 1/2 Inch - Female Flare fitting you could use the MB Sturgis Propane Adapter Hose - 3/8" Male NPT x 1/2" Female Flare Swivel - 4' # 100383-48-MBS. I...
  view full answer...
• Is it Better to Use a Single-Stage or a Two-Stage Regulator for Your Appliances
  Though your heater unit has a built-in regulator, it is only capable of handling a very narrow flow rate range. For this reason, it's best to not consider an appliance's built-regulator as a replacement for the second stage for a two-stage regulator. I recommend going with a two-stage regulator as they are going to ensure that the flow rate going to your appliances is a constant 11" water column pressure. The regulator that you referenced, part # CAM59013, is a single-stage and best used...
  view full answer...
• Regulator for Dyna Glo 30k BTU Heater
  A dual stage regulator like the Camco part # CAM59333 that you referenced would do a great job giving you consistent pressure for your heater. This is rated for 160k btu and you'd only need 30k.
  view full answer...
• Are Settings Needed For 2-Stage Regulator CAM59333
  The Camco Horizontal 2-Stage Propane Regulator w/ P.O.L # CAM59333 is already set for the correct pressure, so you do not have to adjust any type of settings.
  view full answer...
• Replacement LP Regulator For Marshall 605H Regulator
  Thanks for the picture! To replace your Marshal 605H propane regulator you will need to go with the Camco Vertical 2-Stage Propane Regulator # CAM59313. This will be an exact replacement for your current regulator. I included a video review of the # CAM59313 for you to take a look at.
  view full answer...
  
• Which Propane Regulator for Mr.Heater 85K BTU Heater
  To add a regulator to your 100-lbs propane tank that will allow you to use a Mr.Heater 85000 btu system I recommend using something like the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr # CAM59333 which is designed to provide constant 11" WC propane pressure. Since it's rated for up to 160,000 btu/hr it's more than capable of working with your Mr.Heater. Since this regulator screws directly into your propane tank, you'll need to make sure you've got a free port available...
  view full answer...
• Replacement Regulator and Hose for 1992 Marshall M 260
  Thanks for the pictures! I have a better option for your setup based. It is the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L - 160,000 Btu/Hr item # CAM59333. The Camco will work as a replacement for your Marshall 260 Horizontal LP regulator and it includes a P.O.L. connector. It has a 3/8" NPT inlet connector so you will need the MB Sturgis Propane Hose Assembly - 1/2" Female Flare Swivel x 3/8" MPT - 4' item # 100383-48-MBS.
  view full answer...
  
• Can a Dual Propane Tank Regular be Used with Just One Tank
  Camco Automatic Changeover 2-Stage Propane Regulator for Dual Propane Tanks # CAM59005 has a valve on top that will automatically switch to a full tank so you could use it with one tank and it would just always be open to that tank. But if you will always be using one tank we have 2-stage regulators # CAM59313, # CAM59323, or # CAM59333 for a single propane source and they would be more ideal than the dual tank option.
  view full answer...
• Replacement Horizontal Marshall 260 Propane Regulator
  Yes, the part # CAM59333 will work as a replacement for your Marshall 260 LP regulator. Keep in mind that it does have the P.O.L. connector included. If you do not need the P.O.L. connector then you will want to go with the Camco Horizontal 2-Stage Propane Regulator # CAM59323.
  view full answer...
• Recommended 2-Stage Propane Regulator for Water Heater
  I suggest you use the Camco Horizontal 2-Stage Propane Regulator w/ P.O.L , # CAM59333. This regulator maintains a constant 11" w.c. gas pressure, the 2 stages ensure a consistent flow.
  view full answer...

Do you have a question about this Propane Fitting?