Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Keep your ball mount, tow bar, bike rack, cargo carrier, or other hitch-mounted accessory stable and rattle-free with this easy-to-use clamp. No tools needed, just tighten the clamp with the built-in lever and then pop it down to secure.
Features:
Specs:
Average Customer Rating: 4.1 out of 5 stars (237 Customer Reviews)
Keep your ball mount, tow bar, bike rack, cargo carrier, or other hitch-mounted accessory stable and rattle-free with this easy-to-use clamp. No tools needed, just tighten the clamp with the built-in lever and then pop it down to secure.As advertised, great old school customer service! Bought to alleviate very slight rattle on hitch for our Road Toad teardrop trailer. Highly recommend etrailer.com for your needs. They modified my order quickly over the phone in a very pleasant customer experience.
Used it two times does not stay latched. Found a much better solution on one that has a lip on the crossbar for the ubolt. It has functioned very well. The Curt clamp now lives in a drawer in the garage.
2023 Honda Pilot EX-L Curt custom 4 way flat wiring connector etrailer # C48ZV. Step No.5 in the Curt instructions needs to be ignored, there is no need for a new power wire to the vehicle battery.The curt converter box gets power from the vehicle wiring. When connecting the white curt connector to the vehicle connector the release clip on the curt connector goes on the right side. Had to use a borescope to figure this out. One 30 amp fuse needs to be added in main fuse box position 7 and one 20 amp fuse needs to be added in main fuse box position 12. The Curt instructions do not include this. Used a 3/16 machine screw and locknut to secure ground wire to existing hole in steel support after removing trim panel in front of storage area.
Not worth buying. The cam system doesn’t provide enough range, so you end up needing a wrench to tighten or loosen it. Also, I was using it with a 75lb load distributing hitch that I can’t handle with one hand, and I found I had to fully loosen the anti-rattle device to prevent it binding up as I tried to remove or insert the hitch.
I used it flat towing a full size chevy truck behind motorcoach and it did not do well.
It came apart.
It works like it supposed to you. Once you get it set up on your hitch you don’t hear any more rattles.
Rick
12/29/2023
This product does keep the hitch from rattling and bumping when starting and stopping. You need to install it properly.
Not as easy to install as I had hoped, but it does reduce the rattling of my hitch significantly.
Works as advertised. There are little plastic disc spacers/washers the degraded and fell off but it doesn't impact the functionality. Used for a very light utility trailer to reduce some of the rattling.
The idea of having a threaded handle is a great idea because of the ease of taking it off and on without a wrench. However, it didn't work well for me as I couldn't get it to tighten enough to make it quit rattling. I finally took the handle off and simply put another nut on in its place. This is not a good product.
Good design. Mounts much faster than my previous anti-rattle device which requires a wrench to tighten two bolts.
The downside is the design of the Genesis GV80 and trailer hitch prevents upright mounting of the clamp. There’s not enough clearance to operate the clamp. Simply inverting the clamp works but requires reaching underneath to dismount.
I was skeptical when I purchased this but after reading about it and using it I was impressed! It actually worked and there was NO more rattling of my hitch!! Great item/product!!!
Continues to eliminate the hitch rattle. The coating did start to allow some minor rust. The rust surprised me because eastern Tennessee where I now live, does not use much salt.
Michael
8/26/2023
The product continues to perform well. It is in the weather all the time. The minor surface rust has not gotten much worse.
Rusts and corrodes easily. Used mine once and removed right afterwards and it now is unusable.
I had several different kinds of these, this was the quickest & easiest to use
Frederick
12/30/2023
#rd one Ive tried, by far the easiest to use and works well
Great place for all your rv needs,great prices,great customer service
Easy installation just like demo.
Darrell P.
8/1/2023
The anti-rattle device was easy to install and works well. Keeps the rattle down even on bumpy roads.
Works ok, but I had to replace the nylon washer with a stainless one after the nylon failed.
I purchased this device because it would be easy to transfer between vehicle's. It works fine for awhile, but becomes loose on long drives. Going to try adding a lock washer on the left side and see if that helps
Crusted and rusted, more of an eye sore now.
will not work well for a ram truck with standard bumper can't get it tight
Jenny N.
2/15/2022
I am happy to look into this for you. I wanted to ask if it was possible to send a picture of the clamp installed?
Jenny N.
2/16/2022
I think that with your hitch tucked under the bumper that the u bolt style anti rattle device is not the best option. You might be able to turn it upside down and see if it tightens this way.
It kinda works, but I not great. When you try and clamp it down it grinds aluminum to aluminum. So you have to try and lube the lever to the clamp. It really doesn’t keep the hitch from banging with a trailer on. It works great if it’s just the hitch and your on bumpy roads to keep it from rattling but not with a loaded trailer.
I like that they are fairly easy to use. I found that it tends to loosen.
No more rattle or noise from tongue and ball! Highly recommended
This Curt clamp works as advertised and after installing it upside down to clear the Canyon bumper cover, it was a cinch to adjust and provide anti-rattle protection for my hitch. It is very easy to install and tighten without the use of a single tool. Great product!
Dennis
8/15/2022
Great product that ends the dreaded hitch ball mount rattle. Heartily recommend as an inexpensive fix and it looks great while keeping things quiet.
Didn't work great on my 2017 F350 while using a Weight Safe hitch. Just didn't fit great, too small even with a 2" reciever. Unit also deteriorated rather quickly and corroded quickly. I no longer use this and have switched brands.
Katrina B.
8/24/2022
I am sorry to hear that your item is not fitting your application. I have sent your information over to our customer service department for them to get into contact with you about getting this corrected.
Do you have a question about this Hitch Anti-Rattle?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
12/21/2023
That is not good. Luckily, there is a lifetime warranty on this product. I have sent your information over to our customer service department to look into this possible warranty for you.