Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue - Bolt On - Up to 7,000 lbs
(902 reviews)
Price: $157.77
In Stock
Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue - Bolt On - Up to 7,000 lbs
Retail:$223.55
Our Price: $157.77
You Save: $65.78
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
49% prefer this
18% prefer this
17% prefer this
15% prefer this
- All Info
- Reviews (902)
- Q & A (0)
- Photos
Fulton Folding Trailer Tongue
- Coupler Hinge Kit
- 3 x 4 Inch Tongue
- Fulton
- 7000 lbs GTW
- Bolt-On
- Up to 48 Inch Long
Use with actuators or standard couplers to create a foldaway tongue up to 48" long so that your trailer can be stored in even the smallest garage. Unique offset design guarantees superior performance.
Features:
- Hinge kit lets you create up to a 48" foldaway tongue for your trailer
- Designed to be used with actuators or standard couplers
- Bolt-on installation
- Sturdy steel construction
- Corrosion-resistant, Z-max 600 zinc finish
- Mounting hardware, pivot bolt and pivot pin and clip included
- Not for use on aluminum trailer frames
Specs:
- Application: 3" x 4" trailer tongue
- Trailer tongue material thickness must be between.188" and.120"
- Capacity: up to 7,500 lbs (see table)
- 5-Year limited warranty
Use the table below to determine your maximum pivot length based on your trailer capacity. Pivot length is the measurement from the center line of the coupler ball to the farthest pivot hole.
HDPB340301 Fulton High Performance Bolt-On, Fold-Away Hinge Kit for 3" x 4" Trailer Tongue
Item # FHDPB340301
Installation Details
California residents: click here
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- Product did not meet expectations
Customer Reviews
Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue - Bolt On - Up to 7,000 lbs - FHDPB340301
Average Customer Rating: 4.8 out of 5 stars (902 Customer Reviews)
Use with actuators or standard couplers to create a foldaway tongue up to 48" long so that your trailer can be stored in even the smallest garage. Unique offset design guarantees superior performance.by: Chris04/07/2024
Very well made and beats cutting a hole in the garage door ??
by: Chad 02/08/2024
Excellent upgrade for collapsing the tongue of a trailer. I used this on a galvanized boat trailer and the install is pretty straight forward. I used a sawzall with a metal blade to make the cut (make sure all wires or brake lines are clear before cutting) and it worked perfectly. Just take your time and make the cut straight. I have towed the boat several times since this addition and there’s no issues. No play in the junction so no annoying rattling. I was very happy to finally complete this project. Makes so much more room in my shop not walking around a long boat trailer tongue and allows me to fit other items in front of the trailer if needed inside the shop.
by: Vance 11/13/2022
Watched a good video before I started-make sure you have good drills (16 holes)
I used a 1/4-3/8 then the 1/2 I think that helped alot. One thing I would receommend of the manufacturer that they mark the "trailer" portion of the swimg away and the "tongue" portion I was a little confused on that.
I am very happy with the results was able to get my old boat into a shed it previously was too long for I was able to shorten the tongue approx 32".
The etrailer folks were top notch with their service and ability to answer any questions I had. I only have one pic of the folded up tongue attached
by: Bradford 12/05/2023
Very nicely made unit. It was slightly larger than my trailer rail but I just shimmed it with some aluminum. Just remember that you will probably have to add some extra safety chains and have a good supply of sharp drill bits to make holes in your trailer.
by: Anthony 10/28/2022
Awesome product to update trailer for hinged tounge easy bolt on instructions done in less than an hour
Anthony
10/29/2023
Wonderful product easy install high quality
by: Trena08/23/2022
We ordered this product for our boat trailer. My husband us extremely happy with it and recommends it to anyone with storage space issues. We are now able to park our boat in our driveway instead of storing it off site and paying winter storage fees.
Trena
8/24/2023
Its great! Storage of boat is so much easier now, shouldnt have waited so long to buy this. Money well spent! Dont hesitate!
by: Victor05/30/2016
I purchase items on the internet frequently. I would say that etrailer should be rated one of the highest rated websites. The product purchased was high quality, clear instructions that made the installation easy, on time delivery and, of course, the product was exactly as described on etrailer website. The trailer now fit in my garage.
Victor
6/2/2017
The product has worked out great. Several friends commented and may have ordered one for themselves.
by: Ron 12/07/2023
Trailers great, no issues and now I have more room in the barn to close doors.
by: Anthony08/09/2022
Pretty easy to install if you have the right tools. Boat now fits in garage without needing to be at an angle and in the perfect spot. Picture is before I got the new safety chains and wiring installed. Make sure to get loom to protect the wire at the joint and possibly upgrade wire quality. I went with Wesbar 787268 and a braided wrap.
by: StephenB06/13/2018
My son purchased this product which I installed on my EZ Loader trailer. Took a few hours but I like a project. Its been great, allowing me to easily park my boat in the garage with room to spare. Just wish I had installed it earlier. When I installed, I also replaced my brakes (the entire brake plate, etc), bled the brake line and installed the flex line needed for the swing. Got all the accessories from etrailer. Great service and just recently ordered some lights as well.
by: Jack 05/05/2024
Love it easy to use
by: Jerry H.08/27/2014
What a great product! And it's made in the U.S.A. Excellent quality, just as you would expect from an American made product. Fit & finish are very good, and the instructions were well detailed and easy to follow. Kit was complete with special tools needed for installation, and was not missing any parts. Took a little under 4 hours, and that included time to relocate trailer tongue jack to a new location. Looks like it was factory installed, and was considerably cheaper than adding 3" to the back of my barn. Now I can just fold the tongue (shortens trailer by 27 inches) and close both the front and rear barn doors. As the photos show, all that's left is to add the new, longer safety chains. Thanks for a great solution to my problem.
by: Christopher 09/19/2023
Great product. Easy to install. Enabled me to store boat on trailer in garage in deed restricted community
by: Lee D08/12/2013
Your product was a tremendous package. The trailer I installed it on carries a 1976 Cobalt 19DV that I have owned since new. The trailer is a Calkins single axle 4000lbGW. I have paid over 15K in storage fees for the over 37 years I have owned this boat. I wasn't aware of a product like this until I happened to see a trailer at a Bass Pro Shop in Branson MO while on a vacation trip. The trailer had a swing tongue not your product but it got me thinking and after returning home I found your product on the internet. Can't believe how great the application fit and the ease of installation(after drilling holes of course). I have on single car garage that I tried to store the boat in but the tongue was to long to be able to close the door. After this installation the trailer fits perfect. Great product would recommend to anyone.
by: Charles 03/14/2024
Excellent products,service and fair pri cing.
by: Robert03/06/2022
Haven't put it on yet, maybe this week. I purchased a new boat April 1st of last year, knowing that I would need the coupler hinge kit to garage store it. The boat is in the garage, but I had to cut the tongue off to be able to shut the overhead door. Now I can install the coupler just in time for boating season. I knew the problem wasn't etrailer's making.
Robert D.
3/7/2023
good
by: Carl08/11/2023
It arrived missing the pin!
Called customer service and Kim who was awesome,
Helped me out right away, package came open during delivery and pin fell out, post office did not put the part back in and taped box shut.
Within minutes of calling customer service, Kim had a new one on the way!
by: Mike 05/31/2023
This Fold-Away Coupler was a life saver for our new boat and trailer. We bought more boat and trailer than our barn could hold! We now have the room required to store and move about in the off season. Would recommend this valuable piece of equipment.
by: Jeff 05/18/2023
I have added the Fulton Fold-Away to two of my boat trailers and would highly recommend this product who is need of shortening their trailer tongue length. Installation was not difficult at all.
by: Bryan07/08/2018
Bought this to fit my new-to-me boat in my garage. Installed very easily and it helps to have a second set of hands. As others have mentioned, it does have a little play up and down, but it's nothing noticeable when towing. The coupler pin sits pretty snug and there isn't any play in mine.
by: NStanley02/09/2024
Now able to garage boat.
by: Ron B05/16/2014
Excellent product. They were extremely helpful in getting this ordered --'real' friendly people. All hardware, plus a centering punch and torx bit to hold the fasteners were provided. Thank you much.
by: Jeremy 06/05/2023
This thing is a tank! Way more robust than I expected. Transfer punch that came with the kit was a nice touch for installation. I will always recommend etrailer to my friends for anything they need.
by: William L09/14/2013
excellent product in fact I just ordered another for another trailer installation is straightforward and very easyexcellent price thanks again William
25
900
Show More Reviews
See what our Experts say about this Fulton Folding Trailer Tongue
- Availability Of Fold-Away Coupler Hinge Kit For 1999 Four Winns 190 HorizonWe do have folding tongue adapters that will fit the tongue of your 1999 Four Winns 190 Horizon, but unfortunately the only way to determine the dimensions of the tongue is going to be by measuring it as we do not have that information and I was unable to find it. Your trailer will more than likely either have a 3" x 3" tongue and would need the Fulton Fold-Away Coupler Hinge Kit for 3" x 3" Tongue - Bolt On - Up to 5,000 lbs # FHDPB330301, or will have a 3" x 4" tongue as you mentioned...
view full answer... - How To Make Boat Trailer Tongue Shorter To Fit In A GarageI would be happy to help! Personally I would go with the Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue - Bolt On - Up to 7,000 lbs # FHDPB340301 since you are only adding 12" of pivot length. At that length you will still have the full weight rating of the coupler so it will be plenty strong for your trailer, but will also allow you to make the trailer as short as possible to fit in your garage or any other tight places. While using the Brophy Ball Mount # BM20 and installing...
view full answer... - Parts Needed To Replace Folding Tongue TieDown Engineering 70LC Surge Brake Actuator On Boat TrailerI would be happy to help! Based on the pictures you provided your trailer uses the discontinued Tie Down Engineering 70LC, and we will need to get a bit creative on a replacement as there is not a direct replacement available. What you will need to do is use the a folding tongue kit like the Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue - Bolt On - Up to 7,000 lbs # FHDPB340301, but you will first need to measure the size of your trailer tongue. If you have a 3" x 4" coupler this...
view full answer...
- Can a Fold-Away Coupler Hinge Kit Be Used To Extend A Trailer Tongue? Yes, you will be able to add the Fulton Fold-Away Coupler Hinge Kit to your boat trailer to gain some additional length out of the trailer. We have the hinge kit in different sizes to match your trailer tongue. It appears you will need the 3"X5" # FHDPB350101. We also have a 3"X4" # FHDPB340301 and 3"X3" # FHDPB330301. You will need to source the additional trailer tongue material from a local supplier in the length you are needing.
view full answer...
- Needing A Fold-Away Coupler For A 3" X 4" Trailer FrameThe Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue - Bolt On - Up to 7,000 lbs. part # FHDPB340301, is a fold away coupler hinge for a 3" X 4" trailer frame. I have included a product description link and a video installation link below.
view full answer... - Can the Fulton Fold-Away Coupler Hinge Kit Rust Over TimeThe Replacement Pivot Pin for Fulton Coupler Hinge Kits part # F500336 like the Fulton Fold-Away Coupler Hinge Kit part # FHDPB340301 is designed for boat trailers that frequent salt water so there will be no issues with rust. The hardware and brackets are all zinc coated so as long you don't wear through the coating there will be no rust issues. I have attached a review video I did on the Fulton Fold-Away Coupler Hinge Kit below as well.
view full answer... - Availability Of Swing Away Hinge For A Boat TrailerIt sounds like you are looking for a swing away hinge kit for your trailer tongue. We do have swing away kits available, and fitment will depend on the size of your trailer tongue. We have the following options: 2" x 3" Tongue # FHDPW230300 3" x 3" Tongue # FHDPB330301 3" x 4" Tongue # FHDPB340301
view full answer... - Does Fulton Fold-Away Coupler Hinge Kit for 3 x 4 Tongue Come With Transfer PunchA transfer punch is not included with the Fulton Fold-Away Coupler Hinge Kit # FHDPB340301. The hinge kit comes with mounting hardware, a pivot bolt, and pivot pin and clip. I have added a link below to the installation instructions for you to check out as well of this hinge kit.
view full answer... - What is the Largest Fold-Away Coupler Hinge Kit Available? The Fulton Fold-Away Coupler Hinge Kit # FHDPB340301 for a 3" wide by 4" tall frame is the largest we carry. This kit is rated for trailers up to 7,500lbs. You may be able to reduce the size of your tongue to still use this hinge kit if your trailer does not exceed the 7,500lbs
view full answer... - Can Fulton Fold-Away Coupler Hinge Kit be Used on Pontoon Trailer and Capacity When Cut to 36 inchAs long as your trailer has a 3x4 inch trailer tongue the hinge kit part # FHDPB340301 will fit and work well. When using the hinge at the 36 inch length the capacity would be 6,000 lb total trailer weigh and 600 lb tongue weight.
view full answer... - How Much Up and Down Play Is Normal With Fulton Fold-Away Coupler Hinge Kit FHDPB340301?With the Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue - Bolt On - Up to 7,000 lbs # FHDPB340301 installed you will get some up and down movement. Typically this should not exceed about 5 degrees, or 1-1/2" with tongue at the longest length of 48". The shorter the tongue the less play you will notice. There is play due clearances needed to allow the hinge to be able to open and close without getting stuck. I included a video of the # FHDPB340301 for you to take a look at.
view full answer... - Option For Replacing Swing-Away Actuator On A 2005 Mastercraft Boat TrailerWe do have a potential solution for you. Unfortunately, the swing away actuators like the one on your 2005 Mastercraft trailer have been discontinued, so I am afraid there is no direct replacement, or anything that will fit inside the current swing away. At this point we would have to recommend replacing the tongue of the trailer entirely, all the way down to the swing away. For a replacement option I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout # DX89FR. This has...
view full answer... - Replacement Surge Brake Actuator For Trailer W/ Older Swing Away Actuator For Disc BrakesThank you for the pictures! For a replacement option I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K # DX29FR to replace your current actuator. The # DX29FR has a 7500lb trailer weight rating, is designed for trailers with disc brakes, and is a bolt on replacement. You will likely also need a replacement swing away tongue adapter like the Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue # FHDPB340301 which fits 3" x 4"...
view full answer... - Replacement Actuator for ACT-7.5K Disc Brake ActuatorFor a replacement option I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K # DX29FR. The swing-away actuator you are referencing was discontinued and there is no direct replacement. The # DX29FR has a 7,500 lb trailer capacity, is designed for trailers with disc brakes, and is a bolt on replacement. More than likely you will also need a replacement swing away tongue adapter like the Fulton Fold-Away Coupler Hinge Kit for 3" x...
view full answer... - Availability of Coupler Hinge Kit that Could Fit 2003 EZ Loader Trailer We do have coupler hinge kits available but what your 2003 EZ Loader trailer would need depends on the dimensions of your trailer's tongue. The part # FHDPB330301 is for 3 inch by 3 inch tongues, the part # FHDPB350101 is for 3 inch by 5 inch tongues, and part # FHDPB340301 is for 3 inch by 4 inch. So you'd have to measure your tongue to see which option would work best for you.
view full answer... - Replacement for ACT-7.5K Actuator on Mastercraft Boat TrailerFor a replacement option I recommend the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout # DX89FR. Any swing-away actuators like your ACT-7.5K have been discontinued so this is the best solution. This has a 7,500 lb trailer capacity, is designed for trailers with disc brakes, and is a bolt on replacement. More than likely you will also need a replacement swing away tongue adapter like the Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue # FHDPB340301 which fits 3" x 4" diameter...
view full answer... - Install Video for Fulton Fold-Away Coupler Hinge KitI attached an install video for a similar hinge kit as the # FHDPB340301 for you to check out. You'll see the entire process like you are asking about from the cutting of the frame to drilling and bolting in the new hardware.
view full answer...
- Replacement Fold Away Surge Brake Coupler for Disc Brake TrailerI do have a recommendation as Titan no longer makes their brake actuator with the fold away tongue hinge you are looking for. You will be able to use either a 3"x4" Hinge # FHDPB340301 with the Dexter DX7.5L A-60 Brake Actuator # DX29FR. Or we have the 3"x5" Hinge # FHDPB350101 with the Dexter DX7.5L A-60 Brake Actuator # DX56FR. You will need to acquire a short leg of either the 3"x4" or 3"x5" tubing for connecting the hinge kit to the actuator.
view full answer... - Coupler Hinge Kit for a Trailer with a 3 inch by 4 inch FrameWe do have a hinge kit that fits a 3 x 4 inch trailer tongue with the part # FHDPB340301. We don't have the channel you'd need but you could source that locally at a hardware store.
view full answer... - Inside Dimensions of Fulton FHDPW330300 Fold-Away Trailer Coupler HingeThe Fulton # FHDPW330300 fold away coupler hinge is designed to slide over a 3 x 3 inch trailer tongue, so the inside dimension is just slightly larger than 3 x 3. To install, you'd cut the trailer tongue at the point where you'd like it to fold, slide the hinge over the tube and weld it into place. The hinges aren't intended for use on aluminum trailer frames. Fulton also makes bolt on hinges for a 3 x 4 tube, part # FHDPB340301 or 3 x 5 tubes, part # FHDPB350101. I've linked to a product...
view full answer... - Swing-Away Tongue For Aluminum Trailer With Galvanized Steel TongueFor your aluminum trailer with a galvanized steel tongue (swing-away tongues cannot be used on aluminum tongues), you'll need a die-cast steel tongue with a zinc finish from Fulton. The correct fit is going to depend on the size of your trailer tongue, as well as the thickness of the material of your current tongue, which must have a thickness between 0.188" and 0.120". If your trailer tongue's material thickness meets that requirement you can choose from the following, based on your...
view full answer... - Can Male & Female Castings be Reversed on Fulton 3 x 4 Trailer TongueI can't see any reason at all why there would be an issue reversing the male and female castings of the Fulton Fold-Away Coupler Hinge Kit for 3" x 4" Tongue # FHDPB340301.
view full answer... - Availability Of Hitch Extender Compatible With Trailer Hitch Receiver For 2020 Ford FusionThere is a Class III Hitch available for your new 2020 Ford Fusion, the EcoHitch Hidden Trailer Hitch Receiver # 306-X7239. This hitch has a 525lb tongue weight rating and a 3500lb trailer weight rating so it will have a plenty high rating for your light weight 4' x 8' trailer, though you will want to check the towing section of your owner's manual to find your vehicles towing capacity and use the lower rating between the vehicle and hitch. With this receiver you would be able to use...
view full answer... - Replacement Mounting Hardware For Fulton Fold-Away Trailer Coupler HingeThe only way we have the mounting bolts that you are looking for is with the Fulton Fold-Away Coupler Hinge Kit # FHDPB340301 for 3"x4" trailer pole tongues or # FHDPB330301 for 3"x3" trailer pole tongues. You may be able to find the hardware from a local specialty hardware store. Be sure to get grade 5 bolts for the strength rating.
view full answer...
Do you have a question about this Folding Trailer Tongue?
Info for this part was:
Expert Research:
Mike L
Expert Research:
DeAnne T
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Written by:
Lindsey S
Installed by:
Jeff D
Installed by:
Conner L
Video Edited:
Jacob T
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Matthew E
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Vance
11/14/2023
Works great just like you would expect