Filter Products
Filter Results
$149.76 - $149.76
$114.00 - $132.94
$155.10 - $155.10
Filter by Tongue Application
$149.76 - $149.76
$114.00 - $132.94
$155.10 - $155.10
Videos
for Folding Trailer Tongue
Help Articles
for Folding Trailer Tongue
Expert Answers
for Folding Trailer Tongue
The Dexter Zinc-Plated Brake Actuator #T47457007K does not have an access hole to insert a screwdriver to bleed the master cylinder. You will have to use the old method with a 2x4 and the safety chains. While the trailer is disconnected from the…
view full answer...We can definitely help set you up with a tow package for your 2024 Kia Telluride. The main components you will need are a hitch, 7-way wiring harness, and a brake controller. You will need a good ball mount too, but it sounds like you have that…
view full answer...Thank you for all of the photos and information! From what I can see it looks like you have a #84 spindle but that inner bearing blew out so you should be able to remove that inner sleeve that looks like it's still on the spindle (next to…
view full answer...Hi Charles, While we don't currently offer the inner member that you're needing for the UFP A-70 we do offer a compatible replacement with the Dexter DX7.5L A-60 Brake Actuator #DX33FR. This is the entire actuator assembly along with…
view full answer...I more or less agree with you. The Fulton Fold-Away Hinge Kit for 3 x 3 inch Trailer Tongue - Weld-On, item #FHDPW330300, is a cleaner look and if you got a bad weld job you would not have a safe setup. I have done some welding, I am in no way a…
view full answer...All of the needed install hardware for the Fulton Hinge Kit part #FHDPB230101 that you referenced comes with the kit. You would not need to provide your own.
view full answer...Thank you for providing all the information. If you are going to replace your entire idler hub you would want the Stainless #KH84545S or Galvanized #DE36VR idlers hubs since its on a boat trailer. These will come with the Inner Race #L68111 and…
view full answer...Hey Jon, so the Bearing Buddy seal kit part #BB60002 that you referenced is the correct fit based on your bearing numbers.
view full answer...Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…
view full answer...In order to install a Fulton Fold-Away Coupler Hinge Kit like part #FHDPB230101 on a trailer with surge brakes you are going to want to use a flexible brake line that runs from the actuator to the t-fitting just before it splits to each braking…
view full answer...For your aluminum trailer with a galvanized steel tongue (swing-away tongues cannot be used on aluminum tongues), you'll need a die-cast steel tongue with a zinc finish from Fulton. The correct fit is going to depend on the size of your…
view full answer...I recommend using the Fulton Fold-Away Coupler Hinge kit part #FHDPB230101 that fits a 2"x3" trailer tongue. It comes with all the hardware needed to install. Please keep in mind the trailer tongue material thickness must be…
view full answer...