Low Profile LED Horizontal Strobe Light - Surface Mount - 19 Flash Patterns - Amber and White LEDs

Video Transcript for Buyers Products Emergency Supplies - Warning Lights - 3378891902 Review

Speaker 1: Today, we're taking a look at a Six LED Thin Strobe Light. This Thin Mount Clear LED Strobe Light is designed with a 3/8th inch profile to fit tight areas. The 12 to 24 volt strobe light has six LEDs, features 19 flash patterns with alternating and synchronized functions or features. In the instructions that come with it, it has a name for every single flash pattern that it offers.The light is rated IP67 for water and dust resistance and has an SAE J595 class one rating. Now, LEDs make great replacements for incandescent lights. They last longer, they burn brighter, they're more efficient.

With LEDs, you don't have to worry about replacing bulbs or worry about brittle filaments. The unit features a really nice, durable, rust and corrosion resistant black aluminum housing, has the clear lens with amber and clear LEDs. We have three amber LEDs on one side, and then three clear LEDs on the other.It's a surface mount installation. You get a foam mounting gasket and hardware, all of that's included. It's a three-wire design, so your black wire is your ground, red is for power, yellow is for synchronizing and changing the flash pattern.

When it comes to the overall dimensions of the unit, edge to edge going this direction, it's four and a half inches. Edge to edge going this direction is one and 1/8th inches. Then, the overall thickness is 3/8th of an inch. Mount holes are separated on center by four inches.We're going to go and hook it up to power. That way, you can see what it looks like with some power running to it.

Then, we'll also turn off our overhead lights so you can see it in a lower light setting. It sends out a nice, bright, consistent signal. Now, I'm going to cycle through some of the flash patterns as I talk.It's a really nice, bright design. To change the flash pattern, we need to take the yellow wire and temporarily touch it to power. When we do that, it'll change the flash pattern of the light.

Now, again, the unit has a total of six diodes or six LEDs. The multi-diode design really helps optimize the overall light output. Voltage is 12 to 24 volts. Amperage is one amp at 12 volts.The included instructions go over the wiring. Again, it goes over all the flash patterns. It also tells you how to connect multiple lights together for that synchronized feature that we talked about a little bit. It does have a all feature, which means all the LEDs are on.That's going to do it for today's look at the Six LED Thin Strobe Light.