Thin LED Horizontal Strobe Light - Surface Mount - 12 Flash Patterns - Amber LEDs

Video Transcript for Buyers Products Emergency Supplies - Warning Lights - 3378892300 Review

Speaker 1: Today you're going to be taking a look at the rectangular amber thin-mount horizontal strobe light with three LEDs. Now, this amber LED thin-mount horizontal strobe light has three LEDs, 12 flash pattern, with alternating and synchronous functions. It's most commonly used on work trucks, service vehicles, and trailers. It's going to have a slim, 3/8" profile and a compact size, so it's going to fit in small spaces. The LEDs are going to make great replacements for incandescent lights because they're going to last 50 times longer and be more efficient, providing us a brighter light with less power output. Not to mention, that you're not going to have to worry about any bulbs to replace and there's going to be no brittle filament inside.

Now, it is going to have a black housing with a clear lens and amber LEDs.Now, it is going to be a surface mount. So, we can use the included hardware to mount it directly up, or there are some optional trim rings or bezels and mounting brackets available separately. As far as the wire goes, we're going to have three blunt cut wires. Our red wire is going to be our power wire. Our black wire is going to be our ground wire.

Then, finally, our yellow wire is going to serve two functions. It's going to be to syncing up multiple strobe lights together, but also, it's going to pick our flash pattern.Our light's going to have an SAE J595 Class One rating when used in the horizontal orientation and be CA13 certified. It does have an IP67 rating for water and dust resistance.I'd like to give you a few dimensions on our light. The light's going to come in right at 3 3/8" long. It's going to be 1 1/8" tall.

Then, as far as how deep it is, it is going to come in right at that 3/8" deep. They're going to give us 10" of length of wire so we can get everything hooked up. Again, it is going to have those three diodes on the inside. It's going to work with both 12 and 24 volt systems. At 12 volts, it's only going to be pulling 0.24 amps.I'm going to go ahead and hook up our light so we can see the output and see some of the patterns that our strobe is going to have.

I'll go ahead and hook up our power and ground wire. I'll turn on my power source. You can already see that it's pretty bright. If I take my yellow wire and I touch it to the power source, it's going to switch that flashing pattern. I'll go ahead and turn off the overhead lights so we can get an idea of how bright it actually is. We'll go through some of the patterns, and you can see, even with those three LEDs, it is going to provide a pretty bright flood light in that nice amber color.Go ahead and turn our lights back on. Turn our power source off. We can disconnect our wires.But, that'll finish up your look at the rectangular amber thin-mount horizontal strobe light with three LEDs.