Ultra-Thin LED Strobe Light - Surface Mount - Submersible - 23 Flash Patterns - Amber and White LEDs

Video Transcript for Buyers Products Emergency Supplies - Warning Lights - 3378892202 Review

Speaker 1: Today we're going to take a look at the six LED surface mount ultra-thin strobe light, with the clear lens and the amber and clear LEDs. This strobe light has an ultra-slim 1/4" profile that will fit into tight spaces. Common use for this light is pickup trucks, work trucks, your trailers. It has a nice black base with a clear lens, and then three amber LEDs and three clear LEDs. The LEDs will make great replacements for incandescent lights because it'll last 50 times longer and they're more efficient because they'll provide brighter light with less power output, and of course no bulbs to replace, no brittle filaments.This light will offer 23 flash patterns and simultaneous or alternating function. It does connect using this blunt cut wire connection.

The wire length is about eight inches. It got three different wires, the black wire is your ground wire, white wire is your power, and the brown wire is used for synchronization and alternating flash. I'm going to go through these when I hook it up to power just to explain them to you. This is a surface mount design, comes with the self adhesive tape and the mounting screws for a nice, simple installation.An optional 90 degree mounting bracket is sold separately for a more permanent installation if you prefer. This light has an IPX8 waterproof rating, six LEDs, voltage is 12 to 24 volts, amperage is 0.5 amps at 12 volts.

The last thing I'm going to do is give you the dimensions on this light and then we're going to hook it up. So overall width, edge-to-edge, right at 5-1/8" long. Overall height, bottom to top, is 1-3/16" tall. The total depth on it, we had mentioned, the widest point is going to be right at 1/4".So what I'm going to do now is hook this up to some 12 volt power and basically we'll take our black wire for the ground, and we'll take the white wire for our power. Then I'm going to turn it around that way just to show you how bright it is in the flash pattern.

This brown wire that I had mentioned earlier, this wire is what will change your flash pattern. So in other words, what I'm going to do is when this light is on, I'm going to touch this brown wire to the power wire and that'll give you the different flash pattern options. It'll reset the flash pattern. This brown wire is also used if you have multiple of these lights on a trailer or truck and you want them all to flash in the same time, like synchronize them. Then you'll take your brown wire of each light and connect those so they'll synchronize.So I'm going to ahead, turn on the 12 volt power, and now you can see there's your clear LEDs over there.

You have three amber LEDs. We'll go ahead and turn off our overhead light. You can see how bright they are for just six LEDs. Now I'm going to take that brown wire and we'll go ahead and touch it. You can see since I touched it, it reset it so it's got a different flash pattern. Touch it again, there's another flash pattern. And one more time. Again, there's 23 flash patterns to choose from. Go ahead and turn back on our overhead light and we'll go ahead and turn off our 12 volt power.But that should do it for the review on the six LED surface mount ultra-thin strobe light with clear lens and the amber and clear LEDs.