T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118336
Retail:$43.73
Our Price: $36.18
You Save: 17%
Confirmed to Fit
2005 Honda CR-V
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (1184)
- Q & A (0)
- Photos
2005 Honda CR-V - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- 4 Flat
- Trailer Hitch Wiring
- Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your Honda CR-V with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Includes tail light converter.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection point in rear cargo area
- Plug in connector
- Includes a tail light converter to ensure that your vehicle's wiring matches that of your trailer
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 2.1 amps per circuit
- Tail lights: 4 amps per circuit
- 1-Year limited warranty
Tail Light Converter
A tail light converter is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. The tail light converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
118336 Tow Ready T-1 T-Connector - 4 Wire
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118336
Average Customer Rating: 4.9 out of 5 stars (1184 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Includes tail light converter.by: Dale02/03/2024
Greetings, the plug was easy, the play not so much. After renting a bike trailer from U-Haul the park lights didn’t work. Returning home I bought a flat four plug tester, park lights weren’t working. I wrote their web site to give them a chance to correct it before this review, no response. Not very pleased…hopefully I’ll hear something now
by: CW03/26/2014
1993 Honda Pilot
On '93 Honda Pilot, installed wiring harness in about 20 minutes. Also installed Draw-Tite tow bar (75599) and Tow Ready 4-Flat Universal Mounting Bracket (118149) to stow wiring harness plug. None of the wiring harness is visible from rear of vehicle with only 4 - 6 inches underneath. All of the wire is tucked away in rear threshold where I found two grommets leading underneath the vehicle. After cutting out a space in the grommets for the wire harness to run I reinstalled grommets back into place. Very neat install, wire is snug behind threshold where plug was located. Worked as advertised.
Cw
3/27/2015
No problems at all one year after the install.
by: Chris07/16/2019
I didn't have to pull off the rubber door gasket but I did have to remove the plastic piece across the back which broke the plastic fasteners. I think I needed a Phillips screwdriver and 10 mm socket wrench. I used the double stick tape that came attached to the module and didn't bother with the screw, where it is located I don't think is going to move. There is a cigarette lighter socket that should be removed before pulling the panel out but even without taking that step it wasn't hard to straighten the tabs and plug it back in to the connector.
About a 20 minute job, not difficult.
Christopher M.
7/18/2020
Still working well after a year.
by: John K.08/20/2014
2000 Honda V6
I had an old wood stove that needed to be transported to the metal scrap heap at the local landfill. The hitch and drawbar were already in my possession but I needed trailer wiring for a rental trailer. I looked at the trailer rental store's offering of a generic harness that involved splicing as part of the installation process; I suppose it would work just fine but this product seemed to be much easier to install. After the removal of three trunk lining fasteners I had access to the wiring plug that is standard issue for my Honda. I connected the etrailer mating half of the plug to the Honda plug, fussed with the location of the "box" and the wiring a little and I was done except for verifying with a voltmeter that all the functions were working. When not in use the bulk of the wiring is hidden in the spare tire well underneath the trunk floor panel.
This harness works just fine on my 2000 Honda V6. I'm happy.
by: Dan04/13/2019
2003 Honda Pilot
The trailer wiring harness was a great solution and I have attached some pics of how i ran the wires for the installation. I found some access holes in my 03 Honda Pilot to avoid pinching the wires in the liftgate.
by: Ed02/13/2021
The trailer wiring harness worked perfectly. Getting the panels off my Honda Element was a job but the wiring harness worked as intended.
by: Somsankar04/08/2022
The hitch is compatible to Honda CR-V (model 1998) and apparently fits well. One must be careful to adjust the exhaust system and check the engine rotation for smooth operation, otherwise it could produce noise. The electrical wiring is easy to install with little effort. My purpose is specifically to haul garden and landscaping items and this is a worth spending.
by: Charles 08/18/2022
Such an easy installation. Directions were spot on.
Charles
8/19/2023
I have been using this harness for a year with a small utility trailer and my Honda CRV. Easy installation with very clear photos and instructions worked great for me. Quick response and delivery from etrailer was great.
Mike L.
9/13/2023
@Charles Great, thanks for checking in!
by: Dave O07/10/2015
2006 Honda Pilot
I installed the 4 pin quick connect harness and the ETBC7 universal 7 pin kit on my 2006 Honda Pilot EXL to get it ready for towing our popup camper. The instructions are clear and the installation was fairly easy but did take over 4 hours start to finish. Connected to a tekonsha voyager BC taken from our old tow vehicle. The installation looks professional, I know it was done right, and saved about $200.
by: Amy 1970 Dune Buggy02/27/2017
HondaCR-V
Haven't fully tested it, but installation was easier than anticipated. I recommend watching the video for options for routing the wires to the storage compartment in the CR-V. I cut a small slit in the corner, closest to the bumper, of the storage compartment and pulled the wires through. Honda provides a great place to store the wires! -A.
by: Henry08/31/2019
2004 HondaCR-V
amazing hitch Perfect fit made with high quality and very easy install, from all the hardware necessary to tools to make the job even easier, all wiring was plug and play and very detailed instructions, I wouldnt buy from anyone else!
by: Edwin03/27/2022
Easy installation, works great. Very satisfied with the wiring harness.
Edwin
3/27/2023
Excellent product still, I would buy another one for my next car as well.
by: Steve02/09/2024
Simple install - works great, not much else to say here...
by: Timothy 02/25/2024
2007 Honda Pilot
Fast fast delivery. Solid product. They go the extra miles to include helpful videos. Id recommend
by: Eamon01/05/2021
Items were packed pretty well, nothing seemed to have moved or been damaged during shipping. Part fit as good as OEM, all hardware was correct and the harness fit perfectly.
by: Walt M.06/24/2017
2006 HondaCR-V
This hitch was exactly as advertised and fit my CRV perfectly!!! Used spray bottle with soap & water to lube the two upper muffler rear hangers and they slid off with little prying needed (did not need to remove the lower hanger in front of muffler). etrailer's installation videos for installing both this hitch and corresponding 118336 wiring harness were spot-on and very helpful (also a good video on the Curt website). Took my time tightening the hitch bolts to specs which was a bit awkward until I thought to use my ratchet extension bars. Maybe the easiest "car repair" I've ever done, and probably saved a lot of $$$ doing it myself. If you can change your oil, you can do this installation no problem!
Also, etrailer promptly shipped this product for free (thanks, guys!) and it got here a day early. GREAT COMPANY! When I save up enough to buy roof rack rails in the near future, I'll be back...
by: Jeff03/12/2015
1995 Honda Accord
Had to be the easiest trailer wiring I have ever done
by: Barry 06/26/2023
2005 Honda Pilot
Product functioned as expected. The fact that harness can be stored in vehicle is good. Thanks
by: MoHusker09/08/2017
2008 Honda Pilot
Fastest delivery I have ever had. Ordered Wednesday at 5PM, arrived Thursday at 3PM. I'm only a couple hundred miles from Wentzville, but still, excellent. The hitch receiver (2008 Pilot) installed quickly and easily. No need to remove spare or lower muffler. I supported the left end on a large cooler and quickly maneuvered the right side above the tail pipes. The mounting holes were right on target. I had to tap mine to remove rust, but that's easy as well. The wiring harness was also a snapto install. Simple to plug into existing fitting and the wiring box tucked away nicely beneath the trim as advertised. There are options about what to do with the wiring tail and trailer connector. I chose the method shown in the video...leave it rubber-banded in the storage well. Others have run it outside through available holes, but I did not want to leave it exposed to road grime. etrailer's videos were very detailed and shown on my specific vehicle for both the hitch and the wiring harness. Good values as well. If I were Draw-Tite (or Curt) I would include a complementary rubber plug with their logo...cheap advertising.
Mohusker
9/8/2018
All products holding up well. Easy install, good quality. Works as advertised.
by: Richard03/17/2017
2004 Honda Element
This was pretty easy to install and works great on my trailer. The installation instructions were not exactly correct for my 2004 Honda Element AWD Ex. The number of screws and plastic plugs that needed to be removed to pull the passenger side trim panel clear to access the vehicle's connector did not match the instructions. I found it essential to unbolt the right rear shoulder strap from the floor of the vehicle. This allowed much better access to the wiring behind the panel to plug in the connector for the harness. The adhesive on the black box that comes with the harness was weak, and didn't stick to anything behind the panel.
Richard
3/17/2018
Yes I still like them!
by: Joe B11/03/2016
Honda Pilot
I wrote about the wiring harness in my review of the hitch installation. Many talked about how difficult it was. I followed the directions for my Honda Pilot and found it very quick and easy. It stows in the compartment with the head rests and I pull it out when I need to hook it up. Pretty simple. If only it could be accessible right at the receiver without hanging out the rear hatch it would look a lot better. Picky, picky, picky. But, that's why I gave it a 4 out of 5. The etrailer staff were extremely helpful and quick to respond with precise info. Thanks folks.
Joe B.
11/15/2017
Everything is still working as expected.Thank you for being there.
by: Bret B.05/22/2014
2003 Honda Pilot
Great product! Installed on a 2003 Honda Pilot. Easy installation. Removed trim plate at rear of cargo area without any tools. There was a plug under the plate that you simply plug the wiring harness into. I leave the wiring harness in the storage area for the head rests when not in use. When I need it I pull it out connect it to my trailer and gently close the rear tailgate on the wires.
Bret B.
5/26/2015
Yes I am still completely satisfied with both the hitch and wiring harness.
by: Bill G08/08/2015
1999 Honda Odyssey
Had weird acting trailer lights for quite awhile. When I checked voltages at the vehicle I noticed low voltages for one of the TS. I suspected the 4 way adapter that was installed in 1999 Odyssey. I purchased this one from eTrailer, hooked it into the van and it fixed the issues. The trailer lights are now rock solid. I guess the TS converter on the old one had an issue. All is well now.
Bill G.
8/8/2016
Still working great, no issues :
by: Donald05/29/2016
Pontiac Trans Sport Van
The wiring harness plugs right in to the wiring in the aft area of the Honda. It is there as a backup if I need to transport my Demco dolly behind the Honda it usually carries behind my bus. It was also shipped with the hitch and receiver..new in the box and well packed. I'm very satisfied with the products and service from E=trailer.
Donald
1/26/2018
Yes, everything is working perfectly.
by: Andres P10/02/2019
1995 Honda Accord
Excellet plug and play , fast shipping, well packaged, would buy from again!
25
1184
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Recommended Trailer Hitch Receiver, Wiring, And Ball Mount For 1998 Honda CR-VFor your 1998 Honda CR-V, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13314. This is a far stronger hitch that will give you some options for many accessories as well as ball mounts. I never recommend a Class I hitch receiver if other options are available as it is extremely limiting in every way. For your trailer wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118336. This harness connects to factory...
view full answer... - Brake Controller and Wiring Harness for a 2008 Honda Pilot I would be happy to help you set up your 2008 Honda Pilot with the ability to control your trailer's brakes. To start out with you will need a 4-way connector. The Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118336 you were looking at is the best option. This T-One connector plugs directly into your Pilot's existing wiring with no cutting, splicing or tapping required. Once you have this adapter you will be able to add the Universal Installation Kit for...
view full answer... - Is the Tow Ready Replacement Trailer Wiring Harness # 118253 Compatible with 2007 Honda PilotTo install a 7-way trailer connector on your 2007 Pilot, you will need to start with a 4-pole, # 118336. You would then use an adapter like part # 37185, which would plug into the 4-pole. Once the adapter is plugged in, and the white ground lead is attached to the vehicle frame, all lighting functions are taken care of. If your trailer has electric brakes, you would need to install a brake controller using our Brake Controller Install Kit, # ETBC7. The kit includes the adapter I mentioned...
view full answer... - Recommended Ball Mount for a Rise of 18 inches When Installing Draw-Tite # 75720 on a 2002 OdysseyThe height of the trailer hitch when we measure for the videos can vary based on the year of the vehicle, inflation of the tires, or even how much cargo is loaded in the vehicle so the numbers we give are good to use as an estimate. If you check out the attached video of the Draw-Tite # 75270 being installed on a 2003 Honda Odyssey you can see that the ground to hitch height it 12 inches and from the center of the hitch pin hole to the rearmost edge of the bumper is only 4-1/2 inches. Since...
view full answer... - Is Trailer Wiring Necessary or Difficult to Install on a 2003 Honda Pilot if Only Using a Bike RackIf you only plan on carrying a bike rack or another accessory, like a cargo carrier, with the trailer hitch on your 2003 Honda Pilot, you do not have to install a trailer wiring harness. However, the available wiring harnesses for your vehicle are very easy to install. If you ever plan on towing a trailer, you will need a wiring harness. The connection point is in the rear cargo area as shown in the images for trailer hitch # 13328 (installation details and a video linked below). You...
view full answer... - Is there a Difference Between the Curt and Tekonsha Trailer Wiring Harnesses for a 2004 Honda PilotAs far as how the Curt and Tow Ready trailer wiring harnesses for the 2004 Honda Pilot function and install they are the same. The guts in each of the converter boxes is not quite the same. The Curt harness # C55336 uses surface mount circuitry meaning components are soldered directly to a circuit board. The Tow Ready/Tekonsha harness # 118336 uses through-hole circuitry which you have probably seen before in just about everything. If it were me I would go with # 118336 because we here...
view full answer... - Fitment of etrailer Trailer Hitch Receiver to 2006 Honda Pilot With Full-Size SpareYes, the etrailer Trailer Hitch Receiver # e98851 is designed to be compatible with a full sized spare tire on a 2006 Honda Pilot. If you will be towing a trailer with your Honda Pilot you will also need a vehicle wiring harness. I suggest part number # 118336 for a flat 4-way. For a ball mount, hitch ball, and hitch pin and clip, all can be found in the etrailer Ball Mount Kit # 989900.
view full answer... - Will Curt Trailer Hitch # C11290 Fit on a 2001 Honda Accord Coupe and Other Parts for TowingYou have the right hitch. The Curt Trailer Hitch # C11290, will work on all models of the 2001 Honda Accord. I have included a link to installation instructions for you to review. Along with the hitch you will need the following items to complete your towing setup. A Properly Sized Hitch Ball, 1-7/8 inch, item # 19256, or 2 inch, item # 19258 Draw-Tite Ball Mount, # 3592 Wiring, item # 118336 You may also be interested in a hitch lock, item # e98879, to secure the ball mount in your...
view full answer... - What Trailer Hitch Is Confirmed For A 2005 Honda PilotWhen it comes to installing a trailer hitch on your 2005 Honda Pilot I recommend The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2 inch # e98851. It has a gross tongue weight up to 3,500 pounds and has a tongue weight up to 350 pounds. Per your vehicle's manual it shows you can go up to 350 pounds tongue weight. It would not do any damage to max out the tongue weight but I would not go over it. Going over the weight will cause damage to the car and lead...
view full answer... - Recommended Fit and Compatibility of Components for Hauling a Trailer with a 2005 Honda CR-VI checked out all the parts you listed ( # 13535, # 118336, # C45030, # 63845, and # C21500) and good news they will all work together. I do have a few suggestions for you though. I would instead suggest the Draw-Tite hitch # 75690 over the Curt hitch because if you decide to transport anything like a bike rack or cargo carrier in the future you will need to use a stabilization strap # 18050 per Curt's warranty and with the Draw-Tite hitch you won't. Next suggestion is we offer a Curt...
view full answer... - Will etrailer Trailer Hitch e98851 Work With Full Sized Spare Tire On 2004 Acura MDX?It sure will! The etrailer Trailer Hitch Receiver # e98851 you were looking at for your 2004 Acura MDX is designed to be compatible with a full sized spare tire. If you are planning on towing with your MDX you will also need a vehicle wiring harness # 118336, and a ball mount, hitch ball, and hitch pin and clip which can all be found in the etrailer Ball Mount Kit # 989900. I included a link to the written instructions of the # e98851 and videos for the other products mentioned for you...
view full answer... - Recommended Trailer Hitch for 2006 Honda CR-V to Tow Motorcycle TrailerThe Draw-Tite Max-Frame Trailer Hitch Receiver # 75690 referenced in your question is a great choice and is the hitch I recommend for your 2006 Honda CR-V. This is confirmed to fit your vehicle and will provide a 2 inch receiver opening with a 3,500 pound towing capacity. I do also recommend verifying the vehicle's towing capacity as listed in the owner's manual, as this will likely be the limiting factor. Based on the 19-21 inch hitch height of the trailer, you may simply need to use...
view full answer... - Brake Controller Installation on 2004 Honda CRVHonda does not pre-wire the CRV for a brake controller installation, so you will have to run a length of 10-gauge wire from the passenger compartment, through the firewall and engine compartment and under the vehicle to connect to the 7-pole connector at the rear. The brake controller output wire would connect to the # 2 pin on the trailer connector, which is sometimes labeled BLUE. I took a look at your order and saw that you did not order a taillight converter, part # 118336 for your...
view full answer...
- Best Trailer Hitch Option for 2008 Honda Pilot That Doesnt Involve Trimming Bumper FasciaWhen we installed the Curt # 13328 on a 2008 Honda Pilot, we didn't need to trim the bumper fascia, as shown in the video I've linked you to. If your bumper fascia is the same as shown in the video, you shouldn't need to trim anything. The Draw-Tite # 75599 has the same towing and tongue weight capacities, so it's just as strong and would work just as well as the Curt model. The Draw Tite model makes no mention whatsoever of the need for trimming the bumper fascia, which is why it would...
view full answer... - Tekonsha 4-Pole Trailer Wiring Harness for 2004 Honda Odyssey The correct Tekonsha trailer wiring harness for your 2004 Honda Odyssey is part # 118336. To assist you I linked an installation video showing your same model year Odyssey. The part you have # 118438 fits 2005 through 2010 model years of the Odyssey.
view full answer... - Recommended Trailer Hitch Receiver, Wiring, And Ball Mount For 2004 Honda Element AWDFor your 2004 Honda Element AWD, I recommend the etrailer Trailer Hitch Receiver Class III - 2" # e78KR. This will give you a 2-inch receiver opening that is compatible with more accessories as well as greater strength. For your wiring, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118336. This will connect directly into your factory wiring with a plug-in connector located in the rear cargo area. For an adjustable ball mount that also stows...
view full answer... - Trailer Hitch and Wiring Recommendation for Towing Trailer with 1999 Honda CR-VThe Curt hitch part # 13314 is a confirmed fit for your 1999 Honda CR-V and would work well for towing a small utility trailer like you mentioned. You would not need the part # PSA256S0303 as the trailer rental place would already have a coupler installed on the trailer. You will need trailer wiring, for that you would want the # 118336 which is a confirmed fit. The trailer rental place could possibly have a ball mount that you could use, but if not we have a solution. You might be interested...
view full answer... - Is There a 2 inch Hitch that Fits 2003 Acura MDXYes we have 2 inch hitches that fit your 2003 Acura MDX like with the etrailer hitch part # e98851 which I recommend highly as it is mostly hidden and has a very durable powdercoat finish. If you need trailer wiring as well the part # 118336 is a confirmed fit and very easy to install.
view full answer... - Testing Tow Ready Custom Fit Vehicle Wiring, # 118336 For Correct Functions on a 2005 Honda CR-VYou could have a problem with the converter box in the Tow Ready Custom Fit Vehicle Wiring, # 118336, but to be sure, I would test the connector with something other than a plug in style test light. A trailer or a circuit tester like the Quickee # 3808 would be better. Some times, the plug type testers can cause a malfunction. To eliminate it as the problem another testing method will need to be done. With a trailer hooked up, you would simply run through the functions; left, right turn...
view full answer... - 7-Way Trailer Wiring Recommendation for 2005 Honda PilotYou will need to start with a 4-way (if you do not have one). For that you would want the # 118336. Now if your trailer does not have brakes all you would need is the part # 37185 as an adapter to convert the 4-way to a 7-way. If you do have trailer brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller. For a brake controller I would recommend the Prodigy P2 Brake Controller...
view full answer... - Can Draw-Tite Trailer Hitch 75599 Be Used To Tow Pop Up Camper With 2004 Honda Pilot?The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75599 you were looking at is a great option for your 2004 Honda Pilot EX-L and will be perfect for towing your pop up camper as long as it does not exceed the ratings of your vehicle or hitch. The # 75599 has a 350lb tongue weight rating and a 3500lb trailer weight rating and as long as your Pilot does not have more than 3 passengers it does as well. The towing capacity of your Pilot decreases with the amount...
view full answer... - Hitch and Wiring Recommendation for my 2008 Honda PilotFor your 2008 Honda Pilot the etrailer Trailer Hitch Receiver part # e98851 and the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118336 are custom fit and will work perfectly on your Pilot. They are both easy to install. Check out the video I attached on the wiring installation.
view full answer... - 4-Way Trailer Wiring Harness Recommendation for a 2011 Honda PilotFor trailer wiring for your 2011 Honda Pilot you would want the Tow Ready harness part # 118491 as it has been confirmed to fit your vehicle and will provide you with a 4-way trailer connection. I attached an install video for you to check out as well.
view full answer... - Locating Install Harness for Trailer Wiring in a 2000 Honda CR-VIt sounds like your 2000 Honda CR-V is set up like the newer CR-Vs and the harness is actually behind the rear threshold. Check out the video I attached for more info on this. This harness fits several vehicles and all of them have different places that they hide the harness so I would check out the install instructions to see where the harness is typically located in other vehicles to give you more places to look.
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Test Fit:
Nicholas E
Test Fit:
Shane T
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina D.
2/5/2024
There are a couple of reasons that this harness would not be working. Have you had a chance to check the wires on the vehicle side, as well as the trailer side? If not, I would highly recommend using a circuit tester, like part # PTW2993 to test the wiring on both sides. Also, be sure to test the wiring going to and from the converter box. First test the wires going into the converter box. If they are fine, move onto the wires coming out of the converter. If you have power coming into the converter but not out, then we will need to get a replacement out to you, because the converter is bad. Let me know if this helps.