T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118420
Retail:$82.18
Our Price: $69.99
You Save: 15%
Confirmed to Fit
2012 Honda Accord
Coupe
Sedan
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (202)
- Q & A (0)
- Photos
2012 Honda Accord - T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- 4 Flat
- Trailer Hitch Wiring
- Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your Honda Accord with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Circuit-protected converter guards against shorts.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily - no cutting or splicing of wires
- Locate connection points in trunk
- Plug in T-connector
- Includes circuit-protected tail light converter to ensure that your vehicle's wiring matches that of your trailer
- Provides protection against electrical shorts and overloads
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 2.1 amps per circuit
- Tail lights: 5 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your trunk, behind the tail lights on both the driver's side and passenger's side. You will need to remove some interior trim or carpeting to access the harness.
Once installation is complete, the 4-way flat connector will be stowed within your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
Circuit-Protected Tail Light Converter
A tail light converter is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. The tail light converter combines the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
This converter safeguards itself and your vehicle against possible electrical shorts and overloads with integrated short circuit protection. Just install the connector as indicated and rest assured that the wiring system of your vehicle will remain feedback-free.
118420 Tow Ready T-1 T-Connector - 4 Wire
Installation Details
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Alternate product found
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118420
Average Customer Rating: 4.9 out of 5 stars (202 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required. Circuit-protected converter guards against shorts.by: bambooburgler06/16/2023
2009 HondaAccord
A [online] search & subsequent [online] video on your channel led me to this purchase. Extremely high-quality, extreme ease-of-installation, I couldn't possibly be more pleased with this product & company. Highest recommendation possible!! :)
by: Trials Warrior10/09/2012
2012 Mazda 3
After watching the installation videos I was a little concerned about how to route the power wire to the car battery. It turns out this wiring harness doesn't need a power wire. No need to cut/split wires either. Just unplug the connector from the rear light assembly, plug it into the wiring harness female connector and then plug the wiring harness male connector back into the light assembly.
The whole process took me about 45 minutes.
This went on a 2012 Mazda 3 hatchback with regular light bulbs.
Ed S.
1/17/2013
Awesome, im going to grab the same setup for my 2012 Mazda3 S sedan.
by: Rogelio 02/13/2024
2012HondaAccord
The item was delivered on time and the installation was as easy as they said.
The only thing is that the two sided tape wasn't included but I used the included self drilling bolt to attached the converting box.
Besides that, I am very satisfied with the product and it works.
by: ORDER HERE OR PAY MORE AND THEY DO IT ALL RIGHT TH11/03/2020
Best harness for a car I ever bought and works perfect. I bought the hitch also an installed myself as I have before. Video helped me removed parts under this newer Civic so it was simple. Best customer service too because I had ordered the wrong riser for the hitch ball and the woman called me to tell me an re-did the order so it all arrived right and showed up in about 4 days !! Amazing company to say the least an was not my first purchase by no means. AAA+++
by: Eric Kelly09/23/2022
Great company. I am now sending you a picture of my Honda Civic, which I use to tow my teardrop camper. Thank you.
by: Alex H. 01/04/2017
2010 Mazda 3
Bought this product about a year ago and still working immaculately. Couldn't be more pleased! Hookup was simple and diagram was very explanatory. Would reccomend to anyone! Thanks, eTrailer!
Alex H.
1/6/2018
A year later and my lights still work flawlessly and wires are still in new condition. Couldn’t be more pleased!
by: Charles C08/20/2013
Easy installation even with the previously installed remote braking system I installed to use the Fit as a tow behind our RV. I don't think it took 20 minutes start to finish.
by: Mike C.08/26/2015
Honda Civic
The wiring harness was simple to install, but only after watching your video at Etrailer.com. The printed instructions were somewhat lacking. My Honda Civic has 4 light bulbs in each taillight. Instead of the instructions telling me to look for the brown wire, why not just show a simple diagram of the 4 bulbs and say "connect the yellow wire to bulb A(see diagram)? I got it connected and it works well. My kit did not come with the double sided tape to secure the box in the trunk. It came with a screw, but I was not willing to drill another hole in the car. Double sided tape works well.
Mike C.
8/25/2016
No complaints. Lights come on when they are suppose to. Thats all I can expect from a harness.
by: Gabriel R.04/17/2017
2012 Honda Civic
Bought this at the same time I bought my hitch and hitch bike rack. figured if I was installing a hitch I might in the future haul a trailer and would need lights. later bought a hitch mounted cargo rack and added lights. boxes would cover or block my tail lights of my car, so I added lights to the cargo rack. Works great. Thank you.
Gabriel R.
4/18/2018
I couldnt be happier with all my purchases. I use the Bike Rack frequently and have used the trailer hitch to tow a trailer once so far. Maybe Ill get to use that a little more this year also. Love the purchases.
by: Shawn P.11/09/2012
2010 Mazda 3
Install went off without a hitch (no pun intended). I jacked up the car, threaded the fish wire, all in all pretty simple. I actually did it on my own and it went well. I was under the car an braced the bar up, was able to get one of the nuts on and put the other two on to hold it into place while I finagled the other side into place (the passenger side outlet on the muffler was kinda in the way). I was able to get it on easily but tightening the last nut (closest to the back of the car) was a bit tough because the hitch frame gets in the way. Overall, it was simple, it's all tightened down, and now we can tow a trailer/cargo/whatever!
Thanks etrailer, your prices beat anyone on the internet and Uhaul by at least 100 bucks.
Shawn P.
6/9/2014
Actually thanks to you guys, much cheaper than Uhaul and other sites, the install was easy and everything worked well and we ended up towing a trailer from LA to Milwaukee when we moved, on a Mazda 3! So, yeah, pretty happy with it, now we can do things like put an attachment on for bikes or camping equipment or whatever.Thanks for the follow up, thats good customer service
by: Chad09/16/2014
2008 Honda Civic
A competitor wanted to charge me $70 to install a similar product on top of the price of the wiring harness. I purchased this product for under $50, watched a video showing how it is installed on my exact vehicle, and spent 10 minutes installing it. It works perfectly. I couldn't be happier. A+ for etrailer!!
Chad
9/28/2015
Thank you for following up with me. I couldnt be happier one year later with our purchase. The hitch and wiring for the trailer work perfectly and I would not hesitate to purchase from you again and have already recommended your site to others. I was very impressed especially with the videos that allowed me to see how installation should go before I even ordered. This is a great feature. Thanks again for great service!!!
by: KC03/26/2017
2008 Honda Fit
This took me about 30 minutes to install. I had never installed tow wires before but this kit was very easy. The hardest part was determining where to plug it in to the car's light system but the plugs fit well and no soldering was required.
Kc
3/26/2018
I remain very pleased with the hitch and wiring harness and have recommended etrailer to friends!
by: Tim G08/04/2013
2008 HondaAccord
I bought a draw-tite receiver, wire kit and ball for my 08 Accord... everything fit great and had great communication with etrailer folks. I was totally satisfied with service, delivery, quality and
performance of my product.
I'm buying from them again soon for our new Acura MDX
Tim G.
2/2/2015
The Honda is sold, but no complaints!The MDX hitch has performed flawlessly....
by: Stephen 09/30/2023
2009 Honda Fit
Very happy with the hitch
by: Darryl07/11/2013
What nice people to deal with. My order arrived ahead of schedule. It only took me about 30 minutes to install the wiring. Everything fit perfectly. A great product. I would recommend this company for any of your trailer products.
Darryl
1/9/2015
Works just fine. No problem hooking up. Hondas are great for this.
by: Mark04/15/2018
2010 HondaAccord
Hitch and wire harness hooked up easy to do picked up trailer yesterday works awesome thank you
Mark M.
4/17/2019
Great easy to install
by: George06/08/2019
Install of wiring was fairly easy, made harder because I'm way worse at this than I think I am. Hardest part was figuring a place to stick the module, and finding something to stick it with. Box says it comes with double sided tape, but mine, at least, did not. Best to have some sticky stuff on hand just in case my experience is the norm, and not the exception.
Literally just unplugging wires and plugging them back in, but in a better, more different configuration. Lights work. I know because I tried it.
The wire the 4-pin connector is on is long, but maybe not long enough? It's long enough for my use case, but I can definitely see a longer trailer tongue or a shorter trailer cable causing an issue. A longer cable would be nice, but I'm sure a 4-pin extension would suffice as well.
Every other cable/wire is more than long enough, so no issues with getting it across the trunk of the car to the other brake lights.
4 stars, because of the lack of included (per the box, anyway) double-sided tape and a just-barely-long-enough cable could be a foot longer and stop worrying me. Quality otherwise is good.
by: Billy J Broome09/16/2016
2006 Honda Civic
I received my trailer harness by US postal mail on the third day after I ordered it.
It took less than twenty minutes to install. Simple and easy. Most importantly it was the right harness for my 2006 Honda Civic.
Billy B.
10/18/2017
Custom Fit vehicle trailer wiring is doing great. Works every time I hook it up. Thanks.
by: Max06/03/2020
Thanks Nicole for helping me out getting everything squared away!
Quick shipping all the way up to central Alaska!!!
Already mounted took no time at all!!!
A+
by: Chris Welch07/26/2017
2011 Honda Civic
The product was super high quality and well made. It was incredibly easy to install and only took about 10 minutes and that includes the time to take apart the trunk! The wire that connects to the trailer is flat and doesn't get pinched when closing the trunk on it!
Overall it was a great purchase! I had purchased the kind that you hardwire/splice in and decided to see if I could find a hassle free custom kit instead (I didn't want to accidentally short or cause any issues with my cars stock wiring) and I found this and I am extremely happy I did (you don't have to modify the stock wiring at all)! It was about twice the price but it is well worth it for the convenience!
by: Frank05/29/2019
2014 Honda Civic
Installed hitch and wiring harness in a 2014 Civic sedan. Be very sure to specify exactly the correct car when ordering since the fitments are very specific--as I found out when I ordered a harness for a Civic without being sure to get a sedan's harness instead of a coupe's! E-trailer was very good to immediately send me the correct harness and accept back my erroneous order.
The hitch is a two-person installation. I did it by myself with an extreme amount of effort to hold the muffler out of the way while threading the attachment bolt above the muffler. Three hands are essential--or else a lot of wood blocks and fine-grained metal bending. Once attached it is a very solid hitch and it is nearly invisible below the back end of the car. Yet the hookup has plenty of access for a trailer.
by: JC05/29/2021
etrailer sure has made a fan out of me! The customer service has been fantastic - very friendly and helpful. The Curt receiver hitch I've installed on my Honda Fit is clearly top-notch hardware, and the instructional video made installation a snap. Many thanks!
by: David11/08/2013
2007 Honda Fit
5 Stars for etrailer's service.
The video on their site show the job being done and it was not any harder. I did expect to be able to put the control module in the trunk space as they showed. There was not even close to enough extra wire to be able to install as shown in the video and my car is smaller than shown (Honda Fit). There was only enough extra wire to allow the module to not have to be inside the taillight assembly.
I got it installed and saved big money and it was easy. I could not believe how easy this was to install and it works.
by: Rick V.02/02/2017
2013 Honda Fit
The hitch was a breeze to install on my 2013 Honda Fit, and gutting the rear interior panels to install the 4 pole adapter was easy and fun. It took us an hour and a half to get the job done with two people. It would take a bit longer as a solo job, but it's a very simple install, and would be doable alone using blocks. Wiring tested fine on the trailer.
There is a little play in between the drawbar and the hitch receiver, but it's nothing worth worrying about for light towing applications. Drawtite drawbar and Drawtite hitch receiver are made for one another, and I would definitley recommend this solution to anyone looking to tow a kayak or small sport frame trailer with a 2013 Fit.
by: Rich 05/17/2021
2015 Honda Pilot
I received my Tekonsha trailer wiring hitch for my 2011 Honda Accord EX today and had it installed in about 15 minutes. Plug and play and with the video link that was provided it was easier than I expected. I had to deduct a star only because the time my order was placed until the time it was picked seemed unnecessarily long considering it was in stock. I will likely order one for my girlfriends 2014 Honda Pilot next.
25
202
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Is The Curt Or Draw-Tite Trailer Hitch Receiver Better For a 2012 Honda Fit? Both the Draw-Tite # 24826 and Curt # C11064 are equally suited for use on your 2012 Honda Fit. These are both class I receivers with the main difference being the installation process due to the different designs. I have linked installation videos below for each of these so you can determine if one would be easier for you to install should you plan on installing the receiver yourself. If I had to choose one over the other I would select the Curt since I know the main receiver portion is...
view full answer... - Will Draw-Tite Class I Trailer Hitch Receiver Fit 2011 Mazda 3S with Dual ExhaustI verified with Curt and their Class I Trailer Hitch Receiver # C11383 will fit your 2011 Mazda 3S with dual exhaust. I've attached an install video that won't be exactly the same as yours, because it's single exhaust, but it will give you some idea of the process. If you're going to be towing and need a wiring harness, the Tekonsha # 118420 will provide a 4-way trailer connector. It plugs into your Mazda's wiring behind both tail lights so there's not any splicing to do. It will then...
view full answer... - Recommended Hitch for 2012 Honda FitFor your 2012 Honda Fit I recommend the # 306-X7286 EcoHitch Trailer Hitch Receiver. This Class II hitch has a 2" receiver opening with a maximum gross trailer weight of 2,000 lbs and tongue weight of 300 lbs. As for the 2015 hitch, a hitch from the 2015 Honda Fit is not compatible with the 2012 Honda Fit. If you plan on doing some light-duty towing, I recommend the # 118420 Tekonsha T-One Wiring Harness for your wiring needs. This is a custom fit part with easy installation. The T-One...
view full answer... - Trailer Wiring Harness Needed For 2013 Honda Civic CoupeI do have an option for the coupe but the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118420 fits the 2013 Honda Civic Sedan. The wiring harness needed for the 2013 Honda Civic Coupe Excluding SI and Hybrid, is the Tekonsha T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118437. This wiring harness plugs into your vehicle's wiring located behind the driver's-side and passenger's-side interior trim panels in your rear cargo...
view full answer... - Can 2009 Honda Civic Tow 1,000 lb TrailerI looked up the towing capacity of your 2009 Honda Civic and it appears to have a 1,000 lb capacity. So if you could keep the trailer under 1,000 lbs total you would be good. You'd need a hitch like the Curt # C11391 that fits your vehicle and has more capacity than needed as well. Then for trailer wiring you'd want the part # 118420 if you have a sedan or part # 118437.
view full answer... - Trailer Wiring Harness for 2012 Honda CivicTo install a trailer wiring harness on your 2012 Honda Civic, all you'll need is the Tekonsha # 118420. You won't need the # 55151 wiring kit, as the # 118420 draws all the power it needs through the vehicle's taillight circuits. The Curt # C11391 hitch you'd looked at is a confirmed fit for your vehicle. You'll also need a ball mount like # 3593, a # PC2 hitch pin and # 19256 for a 1-7/8 or # 19258 for a 2 inch trailer ball. I've linked to some installation videos you might find helpful.
view full answer... - Do I Need A Converter To Install Trailer Wiring on My 2008 Honda FitYes, your 2008 Honda Fit will need a converter to install trailer wiring on the vehicle. The Honda Fit has turn signals separate from the brake lights and requires a converter to convert the cars 5 wire system down to the trailers 4 wire system. The converter is also circuit protected and protects your vehicles sensitive electrical system from damage if there is a short or mis-wire on a trailer you hook up. The correct wiring harness for your 2008 Honda Fit is part number 118420. Simply...
view full answer... - Where Does Wiring Harness 118420 Plug Into on a 2012 Mazda 3The yellow, brown, and red refers to the wires on harness # 118420 for your 2012 Mazda 3 sedan. The wire colors used on the vehicle will not likely be these colors because there isn't a standard color code for automotive wiring. You will just need to locate the matching connectors on the driver's side that will accept the connectors with the red, brown, and yellow wires. The green wire and its connectors plug in line with the passenger's side tail light wiring. I have linked a video that...
view full answer... - Is Drilling Required When Installing Draw-Tite 1-1/4 Inch Hitch # 24776 On 2007 Honda FitThere is no drilling required when installing the Draw-Tite Class I 1-1/4 Inch Hitch, part # 24776, on a 2007 Honda Fit. It is a bolt-on application. I am including a link to the installation instructions on the Hidden Hitch. I am including a video link of a Curt trailer hitch being installed on a 2006 Honda Fit. The hitch is a different brand, but the installation is the same as the Hidden Hitch. Some items you may need to complete your Class I towing setup are the Tow Ready 2 Inch Hitch...
view full answer... - Recommended Trailer Hitch Receiver For 2010 Mazda 3There are specific fits for a 2010 Mazda 3 for the hatchback vs. the sedan. If you have a sedan, I recommend the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11393. If you have a hatchback, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # 24843. If you will be using this hitch for light towing, I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118420 if you DO NOT have LED lights,...
view full answer... - Best Trailer Hitch Receiver For Carrying A Bike Rack On a 2009 Honda AccordI recommend the Curt Trailer Hitch Receiver # C11496 as being the best receiver for your 2009 Honda Accord. The cross tube has plates on both the bottom and top of the receiver to give it additional strength where others only have a plate on one side. Since all the receivers available for your Accord are Class I you will only be able to carry 2 bikes maximum. The Kuat Sherpa 2.0 Bike Rack # SH12B will accommodate 2 bikes up to 40lbs each with a 25" to 29" tire size. Since this rack uses...
view full answer... - Hitch and Wiring for 2009 Mazda 3 Hatchback Grand TouringWe can help you get your 2009 Mazda 3 Grand Touring Edition ready for your utility trailer. Curt Class I hitch # C11386 is a good choice along with ball mount # C45016. You will also need a hitch ball, either 2-inch ball # A-82 or 1-7/8-inch ball # A-80. Just check the coupler on the trailer; it will be stamped or have a sticker to indicate the ball size required. This hitch has a 2000-lb trailer weight rating, meaning that the loaded trailer and its contents must remain within that limit....
view full answer...
- Comparing Curt Trailer Hitch # C11085 and # 11496 for a 2008 Honda AccordThe differences between Curt Trailer Hitch # C11085 and # 11496 are so few, it really only comes down to aesthetics. Both hitches have the same capacity, they install the same way, and they both come with a ball mount, pin and clip. Besides price, the only differences is in the cross tubing. Trailer hitch # 11496 is at a direct angle while # C11085 is more of a gentle curve. A lot of people want as much of the hitch hidden as possible so I would go with # 11496. I have included a link to...
view full answer... - Trailer Hitch and Wiring for a 2008 Honda Fit SportThe available attachment points for a trailer hitch on your 2008 Honda Fit Sport necessitate a hitch design that differs from what you typically think of as a trailer hitch. Truth be told there are many different hitch designs out there and all of them depend on where the available attachment points are on the vehicle. Your Fit Sport requires a specific design. The ratings of the hitches are still appropriate for a Class I hitch; 200 pounds tongue weight and 2,000 pounds gross trailer...
view full answer... - Trailer Hitch and Wiring Harness for a 2009 Mazda Speed3 Grand TouringTo make sure I got you the correct answer, I called the manufacturer to triple-check. The Curt hitch, part # 11386, will not fit the MazdaSPEED model. The Draw-Tite hitch, part # 24816 will fit a 2009 Mazda Speed3 Grand Touring. The wiring system is different on the Grand Touring model, so you will need to be sure to purchase and install a T-One Wiring Harness, part # 118420, on your vehicle. You will need to drill to enlarge four holes on the frame of your vehicle, but you will not need...
view full answer... - Hitch and Wiring Recommendation for a 2010 Mazda 3Depending on the style of your 2010 Mazda 3 we have exactly what you would need for a hitch and wiring. If you have a hatch back you would want the Draw Tite hitch part # 24843 and if you have a sedan you would want the Curt # C11393. If you have the LED taillights you would want the # 119178KIT that is a protected module that draws power from the positive post of your vehicle battery to power the trailer's taillights. If you don't have the LED taillights you would instead want the # 118420....
view full answer... - Which Curt Trailer Hitch Wiill Fit a 2010 Mazda 3 Sedan Non-Grand Touring ModelThe Curt Trailer Hitch, # 11383, is designed to fit the 2010 and 2011 Mazda 3 Hatchback but not the sedan. I have included a link to the trailer hitches available for the Sedan, Non-Grand Touring model for you to view. The equivalent hitch for your 4 door Mazda 3 is Curt Trailer Hitch, # 11393. I have included a link to the installation details for reference. The hitch comes with the recommended ball mount, pin and clip. You can use ball # 19256 (1-7/8 inch diameter) or # 19258 (2 inch...
view full answer... - Is An Extra Converter Needed When Wiring The 2009 Honda Fit With The Tow Ready Harness # 118420The correct wiring harness for your 2009 Honda Fit Sport is the Tow Ready T-One Vehicle Wiring Harness, part # 118420. It will include the circuit protected taillight converter that is needed on your Honda Fit. You will not need any other converters or electrical parts to have a 4-flat connector on your vehicle. The Honda Fit has turn signals separate from the brake lights and requires a converter to convert the cars 5 wire system down to the trailers 4 wire system. The converter is also...
view full answer... - Trailer Wiring Harness for 2013 Honda Civic SedanMy contact at Tow Ready tells me that the connectors that join the wiring harness to the tail light assemblies are different in the sedan, versus the Civic coupe model which is why the # 118437 wiring harness you mention is not compatible with your Civic Sedan. You'd want to use the # 118420, unless you have a Hybrid model in which case you'd use # C59236. We have an install video showing the # 118420 being installed on a 2012 Civic, you can view it by clicking the provided link.
view full answer... - Trailer Hitch Recommendation for 2010 Honda Accord SedanBoth hitches are a confirmed fit for your Accord. The only difference between the two hitches you mentioned, the # C11085 and the # C11496 is that the # C11085 fits against the underside of the vehicle more cleanly. It wraps around the spare tire well, rather than passing under it like the # C11496 does. This also allows the receiver tube to sit closer to the underside of the bumper. This would give you a very slight advantage in ground clearance. Also, the # C11085 is a few dollars less...
view full answer...
- What is Needed to Install Curt Trailer Hitch, # C11496 , on 2009 Honda Accord SedanOn your 2009 Honda Accord 4 door sedan the Curt Trailer Hitch for the 2009 Honda Accord, # C11496, will work fine. It has a Gross Towing Weight Capacity of 2,000 lbs. So if your bikes and total contents that will be on the trailer is under that, you would be fine. It bolts on and comes with detailed instructions. I will send a link with the installation instructions. Also needed is a Draw-Tite Ball Mount, # 3593, and it includes the pin and clip. On the hitch ball you might want to check...
view full answer... - Trailer Hitch Recommendation for a 2012 Mazda 3On both the Hidden Hitch 60258 (discontinued) and the Draw-Tite, # 24843, the top of the receiver tube will be approximately 1 inch below the bottom of the rear fascia. The bottom of the receiver will then be another 1-3/4 inches below that. Measure from that point to the ground to get the ground clearance. Scraping the ground is possible on steep driveways and dips but you are unlikely to damage the vehicle frame unless you are moving quickly to where there is a lot of extra force that...
view full answer... - Recommended Trailer Hitch Receiver And Adapter For Bike Rack On 2013 Honda CivicFor your 2013 Honda Civic, the only options for your vehicle are the class 1 with the 1-1/4 inch receiver. I recommend theCurt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11391. If you will be using this for towing, I recommend the wiring like # 118420 and a hitch ball like # 19256 to go with ball mount # 3593. To use the Thule T2 platform bike rack you have, # TH9044, I recommend you use an adapter like # HTAD. This will reduce your hitch capacity by 50%. Your class...
view full answer... - Best Trailer Hitch Receiver for 2011 Honda Fit SportFor your 2011 Honda Fit Sport, I recommend the Curt Trailer Hitch Receiver - Class I # C11064. It is a custom fit for your vehicle and will give you a 1-1/4 inch hitch receiver opening for a ball mount or other accessory. I've attached a video of this installation to help so you can determine if this is an installation you feel comfortable with. This is an easy installation for most people. If you will be using this trailer hitch receiver for an accessory like a bike rack or cargo carrier,...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Shane T
Test Fit:
Hayden R
Test Fit:
Shane H
Test Fit:
David F
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video by:
Andrew K
Video by:
Kathleen M
Video by:
Alan C
Video by:
Jonathan Y
Video by:
Jacob H
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Bambooburgler
6/16/2024
Still working perfectly - thanks much 4 such a highly quality product :