Recommended Hitch for 2012 Honda Fit

Question

Question:

I am considering buying this trailer hitch for my 2012 Honda Fit: https://www.etrailer.com/hitch-2015_Honda_Fit.htm However, it appears the part is for the 2015 model. Would this hitch still be compatible with my vehicle, and if not, is there a different model that would work better?

asked by: Jeremy

0

Expert Reply:

For your 2012 Honda Fit I recommend the # 306-X7286 EcoHitch Trailer Hitch Receiver. This Class II hitch has a 2" receiver opening with a maximum gross trailer weight of 2,000 lbs and tongue weight of 300 lbs.

As for the 2015 hitch, a hitch from the 2015 Honda Fit is not compatible with the 2012 Honda Fit.

If you plan on doing some light-duty towing, I recommend the # 118420 Tekonsha T-One Wiring Harness for your wiring needs. This is a custom fit part with easy installation. The T-One connector plugs directly into existing wiring - no cutting, splicing or tapping required.

I have attached an installation and review video for your reference.

expert reply by: Robin H

0

Answer 1

The EcoHitch Hidden Trailer Hitch Receiver part #306-X7286 is an excellent option for a 2013 Honda Fit, it's the only one with a 2" receiver tube opening in fact. In regards to trimming, this will be very minor. I have attached a…

view full answer...

Answer 2

I checked with Torklift and their website does say item #306-X7286 has a 300 lbs tongue weight capacity. However, everything I can see online shows the 2012 Fit having a maximum 200 lbs tongue weight capacity. This is common amongst smaller cars.…

view full answer...

Answer 3

The Curt trailer Hitch #C11406 will NOT be the right fit your 2013 Honda Fit but would fit a 2015 Honda Fit. The trailer hitch I would recommend for your 2013 Honda Fit is the EcoHitch #306-X7286. If you plan on doing any towing with your 2013…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 7

Thanks for reaching out, Joe! I recommend using the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-480B which comes with 63" long tracks as well as 54" long crossbars which should give you a little bit of overhang on your canopy. Per…

view full answer...