Hitch and Wiring for 2009 Mazda 3 Hatchback Grand Touring

Question

Question:

I am reading peoples comments and want to make sure I am getting the right hitch for my car. Will this hitch fit my 2009 Mazda 3 Hatchback Grand Touring Edition. If yes, will it pull a metal 8 x 5 trailer like in the picture provided? If yes, what ball hitch should I use? And what do I need to make sure the lights work on the trailer? C11386 Obviously Ive never used a trailer or hitch. Sorry for my lack of knowledge. Thanks for your time and patience. :

asked by: Regina

0

Expert Reply:

We can help you get your 2009 Mazda 3 Grand Touring Edition ready for your utility trailer.

Curt Class I hitch # C11386 is a good choice along with ball mount # C45016. You will also need a hitch ball, either 2-inch ball # A-82 or 1-7/8-inch ball # A-80. Just check the coupler on the trailer; it will be stamped or have a sticker to indicate the ball size required. This hitch has a 2000-lb trailer weight rating, meaning that the loaded trailer and its contents must remain within that limit. It is a good idea to check your Mazda owner's manual for confirmation of what your specific version can tow. Some may not be rated for trailer towing.

For a wiring harness to power the trailer lights you can use part # 118420 if your Mazda 3 has standard incandescent bulb tail lights; if the car has LED lights instead use part # 46255. You can distinguish between the types of lights easily; incandescent bulbs (like the type we all grew up with) have a slight delay in illuminating once power hits them whereas LED lights come on pretty much instantly. If you have ever changed a bulb in the tail lights then they are incandescent.

The linked articles will be helpful to you.

expert reply by: Adam R

0

click to enlarge

Answer 1

We do have trailer hitch receivers compatible with the Mazda 3 hatchback. For 2014-2017, I recommend the Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #24914. For 2010-2013, I recommend #24843. For 2004-2009, I…

view full answer...

Answer 2

The Draw-Tite Class I 1-1/4 Inch Hitch, part #24816, will fit the 2004 to 2006 Mazda 3 all models, and 2007 to 2009 Mazda 3 all models with and without LED taillights. So, this hitch will fit your 2008 Mazda 3 s Grand Touring Hatchback. On this…

view full answer...

Answer 3

You can use a cargo carrier with your 2015 Mazda3 hatchback but it will need to be a fixed carrier and not a folding carrier. The reason for that is the only trailer hitch that fits your '15 Mazda3 is a Class I hitch that requires the stability…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 11

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 12

Yes, it is! Honda and other manufacture's like to leave the fuses out of new vehicles that do not come with a functional towing package to save on costs. You can verify if you're missing the fuses by checking your fuse box but I am pretty…

view full answer...