Is The Curt Or Draw-Tite Trailer Hitch Receiver Better For a 2012 Honda Fit?

Question

Question:

Which hitch is more suitable for Honda fit 2012? Draw tire 24826 or curt 11064?

asked by: Bistra B

0

Expert Reply:

Both the Draw-Tite # 24826 and Curt # C11064 are equally suited for use on your 2012 Honda Fit. These are both class I receivers with the main difference being the installation process due to the different designs. I have linked installation videos below for each of these so you can determine if one would be easier for you to install should you plan on installing the receiver yourself. If I had to choose one over the other I would select the Curt since I know the main receiver portion is Made in the USA.

I recommend installing the 4-Way # 118420 when you install the receiver. This will allow you to connect to most small trailers or in the event you need Auxiliary Lights # C53201 because a hitch mounted accessory impairs the view of your tail lights.

expert reply by: Bud M

0

Answer 1

The EcoHitch Hidden Trailer Hitch Receiver part #306-X7286 is an excellent option for a 2013 Honda Fit, it's the only one with a 2" receiver tube opening in fact. In regards to trimming, this will be very minor. I have attached a photo that…

view full answer...

Answer 2

Consumers of aftermarket products are protected by the Federal Magnusson-Moss Warranty Act. The Act states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever…

view full answer...

Answer 3

For your 2020 Honda Fit, between the Curt and Draw-Tite trailer hitches I definitely recommend going with the Draw-Tite hitch: - Draw-Tite Sportframe Trailer Hitch Receiver #24920 The reason for that is because when we installed this hitch on a Honda…

view full answer...

Answer 4

There are two main trailer hitch options for a 2020 Chevrolet Traverse, the Draw-Tite Max-Frame Trailer Hitch Receiver part #76184 (see photo one) and the Curt Trailer Hitch Receiver part #C13380 (see photo two). The main difference between the two…

view full answer...

Answer 5

Any type of hitch adapter or extender will have the unavoidable side-effect of causing a loss of about half of your hitch's rated capacity, both its tongue weight (TW) and it's gross towing weight (GTW). Hidden Hitch extender #HE18 and Curt…

view full answer...

Answer 6

Since you plan on carrying a bike rack on your 2009 Honda Fit, I would recommend you get the EcoHitch Hitch, part #306-X7286. Even though the hitch is more difficult to install, it gives you a 300 pound tongue weight capacity which is 100 pounds more…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Both the Draw-Tite #24826 and Curt #C11064 are equally suited for use on your 2012 Honda Fit. These are both class I receivers with the main difference being the installation process due to the different designs. I have linked installation videos…

view full answer...