Heavy-duty, square, drop-leg jack is perfect for agricultural, construction, or other heavy-duty utility applications. Includes a sidewind crank and has a side-facing plunger pin, an easy-to-access gearbox and 27-3/8" retracted height.
Features:
Specs:
If you will be using this landing gear to lift and lower your trailer onto a hitch ball or kingpin, then you should choose the jack you need based on its lift capacity. But, if you are just using it to stabilize or support a parked trailer, then you should focus on the jack's support capacity.
Heavy-duty jacks like this one stabilize about 25% of your trailer's total weight when it's loaded up. For example, a 50,000-lb trailer has a pin weight of about 12,500 lbs. For these legs to work, you'd need a set of landing gear with a combined lift capacity of no less than 12,500 lbs. If you only have one jack that can get the job done, that's great! In fact, this should work more efficiently, allowing you to spend less time cranking.
Note: Do not use landing gear to lift your trailer during tire changes or service work, because doing so will exceed the capacity of the landing gear.
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Bulldog side wind square jack, with the non-spring return drop leg, 12 1/2 inch lift, and a 10,000 pound lift capacity. Now, this jack is perfect for agricultural, construction, live stock, or heavy duty utility application. It is a 4 inch square tubing. It's made of a 7 gauge alloy steel, gives you superior strength and durability. It has the painted inner and outer tubes, that are weather resistant, along with the drop leg, is painted. Now, the gear box right here, for the top, is very easy to access for routine maintenance. Over here, you can see it has the two greased inaudible 00:00:35 fittings for easy lubrication.
Now, this is a drop leg, with a non-spring return, which will increase the overall extension for maximum adjustability. Now, when we say non-spring return, it basically means that you will have to physically lift the jack at the foot to return it to the up position, does use the side facing drop leg plunger pin to hold the drop leg in place. This is a direct weld design. The side wind crank, as you can see, is included. The standard foot plate is all included. Now, this jack can be paired with the Bulldog Jack, part number BD182411, to give you a tandem application.
I do want to give you a few specs on this. The overall bracket height on this, which will be measured from the ground up to the top, here, you put a ruler on that, can see it's going to be right at 27 and 3/8 inches, retract it. Now, this does have a lift of 12 1/2 inches. If we fully crank this out and extended it all the way it would measure from the ground to the top, 39 7/8 inches. The drop leg travel, when you pull the pin out, it will travel the maximum of 13 1/2 inches. Again, this is a four inch square tubing.
Again, the lift capacity on this is 10,000 pounds, and the static load capacity on this is 12,000. Basically, just store your handle like that, when you put it back into place, then you're able to crank it. That should do it for the review on the Bulldog side wind, square jack with the non-spring return drop leg, 12 1/2 inch lift, and a 10,000 pound lift capacity.
Average Customer Rating: 4.7 out of 5 stars (49 Customer Reviews)
Heavy-duty, square, drop-leg jack is perfect for agricultural, construction, or other heavy-duty utility applications. Includes a sidewind crank and has a side-facing plunger pin, an easy-to-access gearbox and 27-3/8" retracted height.the jack came the exact day you said it would arrive. Very fast shipping.
Nice jack never used it because it was a lot bigger than I need. Ordered the wrong one so its just sitting getting rusty. sucks to be me. Cost more to send it back. I need a jack for a 14000 lb trailer this one is for a tractor trailer.
We use the jack for farm use. It supports the hitch on a grain wagon when we unhook it from the tractor. It supports the heavy tongue weight just fine.
Very good service and fast . I will recommend this place for all your trailer parts . I will order everything that I will need for my trailers on the future
yes seems to be fine. I thought I ordered the one with the spring return but I must have clicked the wrong item on the website.
Right jack for the job!
Get delivery time
Everything came assembled and in great condition!
Good Product for the cost
Looks great and super fast shipping. Th anks.
Great price,fast shipping
Bought the bulldog 10,000 gooseneck jack for our horse trailer, perfect fit Great customer service. Great product's. I really liked the tracking function. I have ordered several product's from etrailer and been impressed every time. Thanks to everyone that works there.
The jack works great. BD182400.. Our son put it on today and did a great job!
I placed an order on 1/10/22 for 1 left BD182400 and 1 right BD182411 10K 26 In. Bulldog Drop Leg Square Jacks. These were backordered at the time I placed the order on 1/10/22, but were due to be in stock at the end of March, then the end of May. In June the BD182400 stock arrived, but I had to pay for the entire order to receive just one of the legs. It is now 8/21/22 and I have paid for both jacks and currently have 1 jack in my garage waiting for it's counterpart and the backorder now says 9/20/22. I'm sure not all of this is the fault of etrailer, but their business practice of requiring full payment for a partial shipment, is not sitting very well after an 8 month waiting period. Yes, my trailer has been on blocks since the beginning of January 22.
I placed an order on 1/10/22 for 1 left BD182400 and 1 right BD182411 10K 26 In. Bulldog Drop Leg Square Jacks. These were backordered at the time I placed the order on 1/10/22, but were due to be in stock at the end of March, then the end of May. In June the BD182400 stock arrived, but I had to pay for the entire order to receive just one of the legs. It is now 8/21/22 and I have paid for both jacks and currently have 1 jack in my garage waiting for it's counterpart and the backorder now says 9/20/22. I'm sure not all of this is the fault of etrailer, but their business practice of requiring full payment for a partial shipment, is not sitting very well after an 8 month waiting period. Yes, my trailer has been on blocks since the beginning of January 22.
Had it welded on trailer yesterday. Working great. Shipping was very prompt, better than I had anticipated.
The lady, CS, who helped me was excellent help while trying to order what I needed. She went beyond the call for me, running out to the warehouse several times because she could not get hold of the company. Excellent experience and I would not be afraid to recommend etrailer.
etrailer staff was great when the guys in the brown trucks claimed to lose my package, then blamed it on me putting down the wrong delivery address, sure. etrailer folks found my package and worked out the details for my package to be delivered. I WILL DEFINITELY shop at etrailer again. Great service.
Item arrived in good condition and works great. Installed quickly and trailer back in service! Great product!
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.