Can a Powered Drive Kit be Added to a Trailers Landing Gear
Question:
Hello, I have a gooseneck trailer with two manual jacks on the trailer, like this: BD182404 Do you make a product that can convert them to electric jacks? Thanks,
asked by: Brian F
Expert Reply:
The Bulldog Powered-Drive Kit # BD1824200100 that you referenced is designed to fit Bulldog single speed landing gear jacks with a 12k capacity. If that is what you have on your trailer this would work well for you.
There isn't a universal motor kit that will work with most landing gear sets. You will need to determine who made the jacks of your trailer so that you can see if there is a powered drive kit available for it.
Otherwise you will need to upgrade your jacks to a Bulldog set and motor with the following part numbers: # BD182404, # BD182411, # BD1824200100 and # BDCS730300
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Products Referenced in This Question
Bulldog Square Jack - Drop Leg w/ Non-Spring Return - Sidewind - 26" Lift - 10,000 lbs
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Alloy Steel
- 9001 - 10000 lbs
- Landing Gear
- Sidewind Jack
- 26 Inch Lift
- Weld-On
- 1 Jack
- Bulldog
more information >
Bulldog Square Jack - Drop Leg w/ Non-Spring Return - Sidewind - 26" Lift - 10,000 lbs
- Camper Jacks
- Fifth Wheel Camper
- Leveling Jacks
- Stabilizer Jacks
- Alloy Steel
- 9001 - 10000 lbs
- Landing Gear
- Sidewind Jack
- 26 Inch Lift
- Weld-On
- 1 Jack
- Bulldog
more information >
Bulldog Powered-Drive Kit for Single-Speed Jacks w/ 12,000-lb Capacity
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Powered-Drive Kit
- Bulldog
more information >
Cross Shaft Extension Tube for Bulldog Tandem Landing Gear - 72-3/4" Long - Fixed
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Crossmember
- Bulldog
more information >
Product Page this Question was Asked From
Bulldog Powered-Drive Kit for Single-Speed Jacks w/ 12,000-lb Capacity
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Motor and Gear Parts
- Powered-Drive Kit
- Bulldog
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Measure a Trailer Axle
- Q&A: Will Bulldog Powered Drive Kit Fit a Fulton 12K Magnum Jack
- Q&A: Can the Rain Sensor on a MaxxAir Vent be Overridden
- Q&A: Installation Instructions for Bulldog Powered-Drive Kit # BD1824200100
- Article: Trailer Tire Sizing
- Q&A: Trailer Tire Size to Replace 8.75R16.5 Tires
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Q&A: Bulldog Powered-Drive Kit Compatibility With 12K Ram Landing Gear
- Q&A: Replacement Entry Door Lock On A 2004 Featherlight Horse Trailer
- Article: Trailer Wiring Diagrams
- Article: Pintle-Hitches
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Fifth Wheel Trailer Hitch Information and Installation Tips
- Article: Trailer Maintenance Schedule