What is the Inside Width of the Roller in CE Smith 4-Inch Spool Roller Assembly

Question

Question:

I wondering how wide the inside of the roller is. I want to use a bracket/roller like this to run my winch strap on the front of my boat trlr. The strap on my electric winch is 2 inches wide. Thanks

asked by: Dave K

0

Expert Reply:

I went out to the warehouse and pulled spool roller assembly # CE10400G to measure the inside width for you. The inside width is 1-3/4 inches so it will not work for you. Instead you will need a 5 inch assembly such as # CE32150G or # CE10451G.

Please note that the rollers are not tested for use with a winch so I can't say whether or not it would work for that application.

expert reply by: Michael H

0

Answer 1

You will only need one keel roller assembly, and I recommend the CE Smith - which is also made in the USA - because they come with a full assembly as opposed to having to piece together parts, which can be more costly. You only need to choose the one…

view full answer...

Answer 2

I went out to the warehouse and pulled CE Smith Spool Roller Assembly #CE10451G to measure it. It has an overall height of approximately 8-1/2 inches from the bottom of the bracket to the top of the roller. If you are talking about how far it would…

view full answer...

Answer 3

Neither the CE Smith Spool Roller Assembly #CE10451G or CE Smith Offset Spool Roller Assembly #CE32150G have a specific weight capacity due to them not being designed to ever handle the entire weight of your boat. When your boat is contacting the…

view full answer...

Answer 4

I went out to the warehouse and pulled a Offset Spool Roller Assembly, #CE32150G. Measuring from the bottom of the base to the top of the roller in the center section it is 3-3/8 inches. From the bottom of the base to the taller part at either end is…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

The black wire from the break away switch will connect to the blue wire from the break away box, as shown in the provided diagram. By 'brake wires' I'm assuming you're speaking of the wires connected to the brake magnets on your brake…

view full answer...

What is the Inside Width of the Roller in CE Smith 4-Inch Spool Roller Assembly

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching