Replacement 1-1/4" and 2" Shank for Swagman XP Bike Carriers
(4 reviews)
Price: $34.01
In Stock
Replacement 1-1/4" and 2" Shank for Swagman XP Bike Carriers
Item # P315
Our Price: $34.01
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (4)
- Q & A (0)
- Photos
Swagman Accessories and Parts - P315
- Hitch Bike Racks
- Shanks and Adapters
- Hitch Shank
- Swagman
- XP
This shank replaces a damaged shank on your 2009 or newer Swagman Original, XP Series 3- or 4-bike carrier or Post-2010 Trailhead bike carrier. The 1-1/4" square, steel shank has a threaded hitch pin hole, and includes a 2" adapter sleeve.
Features:
- Replaces shank on Swagman XP (S64960) and Swagman Original (S64445) folding bike racks for 1-1/4" and 2" hitches
- Includes adapter for use with 2" trailer hitches
- Has threaded hitch pin hole
- Requires threaded pin and clip (5902; sold separately) to secure bike rack to trailer hitch receiver
Specs:
- Application: Swagman Original Series Tilting 4-Bike Carrier for 1-1/4" and 2" Hitches (S64445), Swagman XP Series Tilting 4-Bike Carrier for 1-1/4" and 2" Hitches (S64960)
- Overall length: 13-3/4"
P315 Replacement 1-1/4" Shank for Swagman Original or XP 3/4 Bike Carrier
Customer Satisfaction Score:
82% were satisfied with this product
18% of customers were not satisfied
- etrailer mistake
- Wrong item was ordered
Customer Reviews
Replacement 1-1/4" and 2" Shank for Swagman XP Bike Carriers - P315
Average Customer Rating: 4.5 out of 5 stars (4 Customer Reviews)
This shank replaces a damaged shank on your 2009 or newer Swagman Original, XP Series 3- or 4-bike carrier or Post-2010 Trailhead bike carrier. The 1-1/4" square, steel shank has a threaded hitch pin hole, and includes a 2" adapter sleeve.by: GaryH10/11/2013
All good everybody was very helpful;Need to get a lock for the rack to screw in the adapter any ideas?
by: Nader Ezzedine06/23/2014
The product is exactly what I was looking for. The costumar service Anna S was so pleasante and so helpful over the phone to guide me through what I am looking for and the charge. I would definitely do business again with etrailer. Thank you
by: John 06/23/2021
Very sturdy material and great fit for my swagman bike rack. Highly recommend!
by: Richard12/10/2022
It had to fit.
4
4
See what our Experts say about this Swagman Accessories and Parts
- Availability of Replacement Shank for Swagman XP # 64960 Bike RackThe correct replacement shank for your Swagman XP # S64960 is part # P315, as long as your rack was manufactured after 2009. The # P132 shank you referenced is a replacement shank for Swagman 3 bike racks, and is not designed to accommodate 4 bikes nor is it designed to work with your Swagman XP model. I have confirmed this by phone with Swagman. The # P315 does feature a threaded pin hole. According to my Swagman representative, there is not a 2 inch only shank available for your bike...
view full answer... - Way to Convert a 2 inch Swagman Original Bike Rack to be 1-1/4 inch Hitch CompatibleYes, you would want the Replacement 1-1/4 inch Shank part # P315. This will replace the shank of your Swagman Original Bike rack part # S64400 and will let you install it in either a 2 inch or 1-1/4 inch hitch. If you plan on installing this rack into a Class I hitch you should note that you will be limited to only carrying 2 bikes.
view full answer... - Replacement Adapter Sleeve for Swagman S64670 XTC2 Bike RackThe replacement adapter for the Swagman XTC2 # S64670 bike rack is part # SP323 which includes Includes adapter, bolt, and threaded hitch pin and clip.
view full answer... - P315 Conversion Bar for Swagman XP Bike RacksPart # P315 probably would not work with your hitch. My information shows that the only available hitches for your 2008 Kia Optima are Class I hitches and P139 is for Class II only. We do have another adapter that will work for a Class I hitch. It is part # HTAD and it will allow your Class I 1-1/4 hitch to accept 2 inch accessories. You will need part # PC2 to hold the adapter into your hitch, and if you do not already have one, part # PC3 to hold your bike rack to the adapter. Please...
view full answer... - Replacement 2 inch Hitch Adapters for Swagman XP Bike Rack and Curt Cargo CarrierThe only way we offer the 2 inch adapter for your Swagman XP # S64960 is with the replacement shank part # P315. Since Curt does not have replacements available for their shank adapters you'd need a sleeve adapter like the part # HT02 and you'd be set.
view full answer... - Replacement Swagman XC Shank Recommendation to Allow an XC Rack to Be Used in a 1-1/4 inch HitchIt sounds like you need the Replacement 1-1/4 inch and 2 inch Shank for Swagman XC Series Bike Carriers # P306. This product can be used on older model Swagman XC bike racks that originally only were designed for 2 inch hitches to allow them to be used on 2 inch and 1-1/4 inch hitches like you have.
view full answer... - Can Swagman XC Hitch or RV Bumper Mount Rack # S64663 Be Used w/ 2012 Ford Fusion 1-1/4 Inch HitchIn order to use the Swagman XC Hitch or RV Bumper Mount Rack, # S64663, with the 1-1/4 inch on your 2012 Ford Fusion you will need a hitch adapter like the Brophy, # HTAD. Please do keep in mind that using an adapter reduces the tongue weight capacity of your hitch by 50 percent and can cause extra movement in the rack. This is where using a support strap, like part # 18050, would come in handy. I spoke with my contact at Swagman and they do not offer a 1-1/4 inch replacement shank for...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Written by:
Tyler C
Updated by:
Adele M
Updated by:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Patrick B.
10/15/2013
You can use either the basic threaded pin and clip, part 5902, or the locking version part S64029.