Replacement 1-1/4" and 2" Shank for Swagman XTC-2 Series Bike Carriers
(21 reviews)
Price: $25.21
In Stock
Replacement 1-1/4" and 2" Shank for Swagman XTC-2 Series Bike Carriers
Item # P316
Our Price: $25.21
In Stock
- All Info
- Reviews (21)
- Q & A (0)
- Videos (1)
- Photos
Swagman Accessories and Parts - P316
- Hitch Bike Racks
- Shanks and Adapters
- Hitch Shank
- Swagman
- XTC
Features:
- Replaces a 1-1/4" shank on your Swagman XTC-2 Series bicycle rack
- Comes with adapter sleeve so that the bike carrier can be used with 2" trailer hitch receivers
- Requires Allen wrench (sold separately) for removal and installation of sleeve on shank
- Has threaded hitch pin hole
- Requires threaded hitch pin and clip (5902; sold separately) to secure bike rack to trailer hitch receiver
Specs:
- Application: 2 Bike Carrier for 1-1/4" and 2" Trailer Hitches - Wheel Mount - Swagman XTC-2 (S64670)
- Length (from center of hitch pin hole to base of bike rack): 17"
- Rise: 3"
P316 Replacement 1-1/4" and 2" Shank for Swagman XTC 2 Series Bike Carriers
Video of Replacement 1-1/4" and 2" Shank for Swagman XTC-2 Series Bike Carriers
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Swagman - Hitch Bike Racks - P316
Today we're going to take a look at the replacement 1 1/4" and 2" shank for Swagman XTC-2 series bike carriers. This part will replace the 1 1/4" shank that's on your Swagman XTC-2 series bicycle rack. Basically, one end right here, you can see, will bolt to the bike rack. Has two threaded holes right here. The other end has a threaded hitch pin hole to attach this bike rack to your hitch. It does include the threaded hitch pin and clip to secure the bike rack to your trailer hitch receiver.
Now, it also comes with a adapter sleeve right here so that that bike carrier can be used with 2" trailer hitch receivers.It does require an Allen wrench for removal and installation of the sleeve on the shank. But just to show you how that sleeve goes on, what you would do is take this section. There's two holes. One's threaded, one's smaller. Just line this up, where the bolt goes in, with the smaller hole.
Make sure it goes through the hole. And then on the other side you'll take . At the very bottom, there's a threaded small hole that'll line up with the bolt. So once you get those two lined up just like that, then go ahead and start tightening that bolt down. And then again, use your Allen wrench.
Again, the Allen wrench is not included. You would have to supply that.Once you snug that down enough and you can see those two pieces will form the adapter sleeve that allow this to slide into a 2" x 2" hitch receiver opening. Again, the application for this is this works on the Swagman XTC-2 bike carrier for the 1 1/4" and 2" trailer hitches. That bike carrier is part number S64670. We do sell that separately on our website.
Now, the length of this, from the center of the hitch pin hole right here to the base of the rack is going to be right at 17" and the total rise when this is installed in your hitch, it'll rise . give you a 3" rise for your bike rack. But that should do it for the review on the replacement 1 1/4" and 2" shank for Swagman XTC-2 series bike carriers.
Customer Reviews
Replacement 1-1/4" and 2" Shank for Swagman XTC-2 Series Bike Carriers - P316
Average Customer Rating: 5.0 out of 5 stars (21 Customer Reviews)
by: Kathryn08/12/2022
Original shank was bent after years using on a truck, would not fit car hitch. New shank was easy to replace and now works great with my car hitch. Very happy.
by: Tim K07/10/2021
Great replacement for my Swagman XTC-2 bike rack. Makes it easy to switch between my 1 1/4" hitch on my Accord to the 2" hitch on my wife's Highlander. Good price too.
by: Sharon10/21/2019
I was "crushed" when I bent my bike rack by backing into a light pole in a parking lot. I thought I would have to buy a new bike rack, but I found the part I bent on your website. Even came a day earlier than stated. Thank you!
by: John Romoser 09/30/2017
Always happy with etrailer. This was a replacement part after backing the swagman bike rack into a phone line.
by: Wayne 04/07/2023
Received quickly, just what I ordered.
by: Wisconsinite08/06/2020
Fit the original bike rack like a glove. Took me a whopping 3 minutes to swap out the old one. Took me longer to find my 8mm Allen wrench. Higher quality than the original. Will do business again with etrailer again!
by: John S.10/21/2016
Ordered the part and it arrived on time. Part was identical to the original, except original was little bent when someone hooked me with their car. Everything fitted and I did not have to buy another bike rack.
by: Mark B05/23/2013
Replacement part to fix bike rack in car wreck. Fast shipping and good price.
by: Ryan S.03/08/2018
Perfect fit and easy to install. Apply thread lock to the two bolts that connect it to the main body of the rack and you’re good to go!
by: Darwing04/22/2021
It was a perfect fit and I like the matte color better than the original. The only thing is that it is missing one hole for a security pin!
by: Chris K09/10/2014
Really fast delivery and excellent comm unication.
by: Timothy08/19/2019
Perfect match and quick delivery!
by: Thomas C.10/14/2017
When ordered they were polite and knowledgeable. I received part very quick .
by: Chuck04/18/2019
Extremely fast shipping and product was exactly what I wanted.
by: Hunter08/20/2020
by: Martin04/13/2018
Everything was perfect
by: Ruth 01/28/2021
by: Hans R01/02/2022
by: Joseph 09/16/2021
by: James 03/18/2021
by: Morgan 07/10/2022
21
21
See what our Experts say about this Swagman Accessories and Parts
- Swagman XTC-2 2-Bike Platform Rack Shank Measurement to Rise BendThe Swagman XTC-2 2-Bike Platform Rack for 1-1/4" and 2" Trailer Hitches # S64670 has a measurement of 5 inches from the hitch pin hole to the part of the shank where it begins the 5 inch rise. You can see this in the attached video of the shank replacement # P316. It sounds like this should just fit on your 2019 Hyundai Ioniq.
view full answer... - Shank Extension Options to Extend Swagman XTC 4 Bike Carrier Past Vehicle BumperI may have a solution for you, but Swagman does not offer longer replacement shanks for the XTC 4 Bike Rack, # S64665. We do carry the Brophy Hitch Extenders like part # HE06 for 2 inch hitch or part # hes6 for 1-1/4 inch hitch. It is important to note that using a hitch extender will decrease the weight capacity of your trailer hitch and your vehicle by 50 percent. Another issue that may arise by using a hitch extender is ground clearance when driving up a steep incline. We always recommend...
view full answer... - Swagman Bike Rack Similar to Traveler that Fits Trailer HitchThere isn't a standard shank that your Swagman Traveller can use to fit a hitch like a standard hitch bike rack. Your best option would be the Swagman XC part # S64650 which is similar but does fit a standard trailer hitch like you are looking for.
view full answer... - Replacement Shank for Swagman XTC-2 Trailer Hitch Mount Platform Bike Rack # S64670Replacement shank # P306 is designed to fit the Swagman XC series bike racks, not the XTC series. Since you have an XTC-2, # S64670, you would need to use replacement shank # P316. To secure the shanks to the trailer hitch you will need threaded pin and clip # P5902 if you do not already have them.
view full answer... - Is There a Straight Shank (Without Rise) Available for the Swagman XTC2The Replacement 1-1/4" and 2" Shank for Swagman XTC-2 Series Bike Carriers, part # P316, that you referenced is the only shank available for the Swagman XTC2 Bike Rack, part # S64670. There is not a straight shank for this bike rack. The shanks on bike racks have rises to ensure that proper clearance is present. Without it, you run the risk of hitting the ground when there are dips in the road.
view full answer... - Hitch Extensions Recommendations for a Bike Rack on Camper TruckFor an extender that long you will need a 2-1/2 inch receiver and an extender like the Titan Hitch Box Extension and Reducer for 2-1/2 inch trailer hitches # RP45292. If your hitch is not a 2-1/2 inch receiver you cannot use the Titan extender. You need to keep in mind your limitations when using an adapter or extender. Using a hitch extender on a 2-inch hitch will reduce your trailer hitch tongue capacity by 50 percent. So if your trailer hitch is rated for 350 pounds of vertical load,...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Andrew K
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Updated by:
Matthew S
Video by:
Aidan B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.