Mounting Brackets For Sway Control Arms on Reese Dual Cam High Sway Control # RP26002
Question:
I have a Reese dual cam weight distributing hitch and the black part that bolts to the A frame that holds the cam was welded on my trailer I have sold the trailer and bought a new one and I would like to order just those two black brackets if that is possible.
asked by: Loren C
Expert Reply:
On the Reese Dual Cam High-Performance Sway Control for Steel Trailer Frames # RP26002 that you have referenced in your question, the black steel mounting brackets that bolt to the trailer frame are available separately. These brackets allow you to attach the sway control cam arms to the trailer frame. That do come in left side and right side configuration.
The Replacement Right Frame Bracket for Reese Dual Cam HP Sway Control # 58462 is for the right side of the trailer. The Replacement Left Frame Bracket for Reese Dual Cam HP Sway Control # 58461 is for the left side of the trailer.
If you need the mounting hardware for these brackets, you will need set # 58437 for 8 bolts or # 58459 for 2 bolts. You may also need the rivet nuts, # RP58507, for a set of 4.
Products Referenced in This Question
Replacement Thread Forming Screw 1/2" - 13
- Accessories and Parts
- Weight Distribution Hitch
- Hardware
- Screws
- Reese
more information >
Reese Dual Cam High-Performance Sway Control for Steel Trailer Frames
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Reese
more information >
Rivet Nuts for Reese Dual Cam High Performance Weight Distribution - Qty 4
- Accessories and Parts
- Weight Distribution Hitch
- Hardware
- Nuts
- Dual Cam
- Reese
more information >
Product Page this Question was Asked From
Reese Replacement Hardware for Weight Distribution
- Accessories and Parts
- Weight Distribution Hitch
- Hardware
- Reese
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: What Size Are The Spacer Washers For The Pro Series Weight Distribution System?
- Q&A: Replacement Washers To Adjust Hitch Head Angle Of Reese Pro Weight Distribution Hitch RE44FR
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: Replacement Motor for Lippert Stabilizer Jack 198641
- Q&A: Will New Reese Spring Bars Fit in Place of Older Draw-Tite Spring Bars
- Q&A: Replacement Parts for Reese Strait-Line Weight Distribution System
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Q&A: Replacement 22210 Spring Bars for Reese Trunnion Weight Distribution System
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Rust Prevention
- Article: Trailer Hitch Balls
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride
- Article: Steel vs. Aluminum Ball Mounts