Pollak Plated Steel Cable Guard for Single-Pole Connector PK11852

Video Transcript for Pollak Wiring PK11763 Review

Today we're going to be reviewing part number PK11763. This is the Pollak Plated Steel Cable Guard for the back of multiple Pollak connectors. This plated steel cable guard is going to connect to the back of your connector plug. It's going to prevent the incoming wires from crimping. It's going to fit over the back of many different Pollak plugs. Again, it's going to prevent the wires from crimping, it's going to keep those wires safe. It includes a nice loop right here.

That way you can unplug your connector with this still on the back of it and then it has that loop on there so you can hang it up when it's not in use. It's constructed of a plated steel construction. It's going to stand up really well against rust and corrosion. If we take a measurement of the overall length, that's going to give us a measurement of about 3-3/4 of an inch. If we include the hook, that's going to extend it out to about 4-1/4 of an inch. Then the opening size that we have here, the diameter of that opening, is going to give us a measurement of about 1 inch. Now I did pull a Pollak plug that has a threaded portion on it back here.

The cable guard is going to be ideal for an application like this. You just place it on there and you would simply just thread it on until you get a nice, firm hold. You can thread it all the way down the threads on the back of the plug and you can see there how that's going to protect the wires and prevent the incoming wires from being able to crimp. That's going to do it for today's review of part number PK11763. This is the Pollak Plated Steel Cable Guard.

.