Keep your trailer wiring up off the ground with this holder. The hook can be bent to set your cable in whichever position you want. Simple, bolt-on installation.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Speaker 1: Today we're gonna be taking a look at the EZ Connector Trailer cable pogo, part number 319-TCP011602. The EZ connector cable pogo gets your cable up out of the way, so that way it won't drag on the ground while you're going down the road. The spiral design keeps your cable in place, which will work with seven-way, four-way, and other various types of cables. The spring loader design allows it to flex out of the way, for things such as operating your jack. It'll also prevent your cable from being pinched during a jackknife.When not hooked up, it also keeps your cable off the ground, to prevent it from being stepped on or run over. To install it, you need to drill a 3/8 inch hole in your trailer frame, and then you'll attach it using the included nut on the other side.
Another option is to drill and tap the hole using a 3/8 24 TPI tap.That completes our look at the EZ connector trailer cable pogo, part number 319-TCP011602.
Average Customer Rating: 5.0 out of 5 stars (3 Customer Reviews)
Keep your trailer wiring up off the ground with this holder. The hook can be bent to set your cable in whichever position you want. Simple, bolt-on installation.
This pogo stick is performing well. It is mounted to the front of the trailer and supporting the cable without any issues. While maneuvering the trailer you can watch the view screen and see the stick moving and bending keeping the cable free from bends and snags. If you have an issue with your cable wiring not being properly supported and out of the way, this tool is the way to go.
I bought this after pinching my trailer cable when backing into a tight space. The damaged cable caused the lights to stay lit even when unhooked from the pickup. This cable holder has kept the cable safely away from pinch points and has a great bonus in keeping the cable off the ground theeeby clean & dry when unhooked. I had to drill two holes to get it mounted in the perfect spot but the entire installation job was under 1/2 hour. If your trailer socket is below your bumper or your cable has the slack to drop into a pinch point then this solves the problem that will probably happen someday.
Just like advertised
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.