Mount-n-Lock Heavy-Haul'r Replacement RV Bumper - 4.0" Wide - 500 lbs - Glossy Black
(15 reviews)
Price: $464.95
In Stock
Mount-n-Lock Heavy-Haul'r Replacement RV Bumper - 4.0" Wide - 500 lbs - Glossy Black
Item # MNT43VR
Retail:$532.37
Our Price: $464.95
You Save: $67.42
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (15)
- Q & A (0)
- Photos
Mount-n-Lock Accessories and Parts - MNT43VR
- RV Cargo Carrier
- RV Bumpers
- Bumper Parts
- Mount-n-Lock
This heavy-duty, aluminum bumper gives you a higher weight rating so you can safely haul your bikes or generator to the campsite. You can store your smelly sewer hoses inside the bumper using the vented endcap to free up space in your compartment.
Features:
- Bumper kit replaces your stock RV bumper for extra durability and a higher weight rating
- Great for supporting cargo carriers, bike racks, and other bumper-mounted accessories
- 10 Heavy-duty brackets reinforce the bumper to prevent heavy loads from damaging it
- Less likely to lead to bumper detachment than a stock bumper with the same weight
- Hollow compartment with vented end plates stores your wet, smelly sewer hoses and fittings
- Circulates fresh air to prevent moisture and mold build-up
- Slide the plates up and down to easily access your hoses
- Rustproof, lightweight aluminum construction with glossy black finish
- Bolt-on installation onto your RV's frame with included hardware - some drilling required
- Need extension plates (MO24VR - sold separately) if frame is shorter than your RV's body
- Need drop plates (MO84VR - sold separately) if your RV's body extends to the bottom of the frame
- Made in the USA
Specs:
- Application: I-beam, S-beam, tube, and channel frames
- Flanged frames: must be at least 4" tall x 3" long
- Non-flanged frames: must be at least 3" tall x 3" long
- Overall bumper dimensions: 92" long x 4" wide x 4" tall
- Maximum capacity: 500 lbs when evenly distributed
- Weight: 22 lbs
- Limited lifetime warranty
Planning on getting a brand new 4-bike rack and want to make sure your RV's bumper will be able to support the weight? Or perhaps you just need to replace the old, dented bumper that's currently on your rig? This durable, hefty bumper lets you upgrade the existing bumper on your RV so you can haul a cargo carrier, bike rack, or a spare tire carrier with confidence. And because the bumper is made out of aluminum, it won't rust in the rain or snow.
Ventilated Storage Compartment
If you don't want to muck up the inside of your RV's cargo compartment, you can use the ventilated storage area inside the bumper to hide your smelly sewer hoses and fittings. When it's time to dump your back and gray tanks, slide the end plate up on either side of the bumper so you can easily grab your hoses. These end plates have small, built-in holes that help circulate fresh air to help prevent moisture and mold from building up on your wet hoses. And by keeping your sewer gear in the bumper, you'll free up space in your RV storage compartment for additional camping gear.
Bolt-On Installation
Once the old bumper has been removed, use the included hardware to directly mount this bumper onto your RV's frame. You may need to do some drilling. The bumper attaches with the included 10 heavy-duty brackets to provide additional reinforcement.
You may also need some Mount-n-Lock Addabumper plates. If your frame is shorter than your RV's body, some extension plates (MO24VR - sold separately) are required. And if your RV's body extends to the bottom of your frame, some drop plates (MO84VR - sold separately) are needed.
10VBK92GB Mount n Lock Heavy Hauler Replacement RV Bumper - 4" Wide - 500 lbs - Aluminum - Glossy Black
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
Customer Reviews
Mount-n-Lock Heavy-Haul'r Replacement RV Bumper - 4.0" Wide - 500 lbs - Glossy Black - MNT43VR
Average Customer Rating: 4.2 out of 5 stars (15 Customer Reviews)
This heavy-duty, aluminum bumper gives you a higher weight rating so you can safely haul your bikes or generator to the campsite. You can store your smelly sewer hoses inside the bumper using the vented endcap to free up space in your compartment.by: Lee04/04/2024
Satisfied & would by again. The original bumper on my 27-foot Freedom Express travel trailer failed when I mounted a lightweight bicycle rack on it. I replaced it with this Heavy-Haul'r bumper. This has worked well. No problem at all now carrying my bicycles. I also use it to carry a equipment rack with an auxiliary generator and gas can. I usually run the generator from the carry rack attached to the Heavy-Haul'r bumper. A bit slow installing with some frame drilling on my camper required but works great once installed.
by: Joseph08/07/2023
Product quality is very good and powder coating was well done. My issue is with the shipment packaging. Although there was an attempt to protect the product in transit it did in fact fail. I recommend the shipper place reinforced cardboard on all four corners from top to bottom and also add reinforced cardboard at each end of the bumper. The shrink wrap was an attempt but didn’t prevent the scratches and dents. After spending nearly $[XX] for the bumper I would say an additional $[XX] spent in proper packaging would eliminate any returns. See pictures.
by: Jesse08/10/2023
Love the product and the ability to safely handle more cargo such as our 4 bike carrier. My only qualm is if you have a Camco Rhino waste hose you will have to use your old end cover instead of the stock ends that come with the unit. The little screws that hold the metal pieces in place are in the way and the hose will not go in.
by: Sam09/18/2023
The products I bought came a little earlier than originally stated, and that was great. Unpacking the products was a big pain in the a. However, every thing was in good shape. My main complaint that gives the 4 stars is I ordered a 4 inch bumper to replace my old 4 inch bumper, but with the slide gates on the ends (which looked like a great idea) my 4 inch dump hose won't slide in past the slide gates. Customer service says I'd have to have a 3 inch hose or buy a bigger bumper. That was not an issue I saw while shopping for the bumper. In fact, the little video showed tipping the slide gate to the side and easily sliding the hose inside. Nope! It never said anything about a smaller hose. I'm going to have to take off the screw in the slide gate on one end of the bumper and remove the gate every time I want my hose. I hope it won't bounce out while I am traveling. If it does I'll go back to a rubber cap, rats!
by: Edward08/31/2023
Both products failed with a 4-bike rack rated for RV use the first time I used it.
by: David09/19/2023
It was easy to install with the adapter. Looks great
by: Thomas 07/17/2023
Product arrived quickly, and was packaged extremely well! Installed and SOLID!
by: Scott 07/20/2023
I received the new bumper right on time.
by: Andrew 05/24/2023
Fast shipping and great packaging.
by: Jeff 04/07/2023
Jeff
4/15/2024
Brackets need to curve up bumper scrapes when pulling into raised driveways etc.
by: Rick 04/26/2023
by: Brenda V02/14/2024
This is an impressive bumper. We ordered this to be delivered to a RV park in FL after our original 4” bumper twisted & broke the welds on our trip down from the weight of our mountain bikes (~ 200 lb total).
We went with a 5.3” replacement to make it easier to insert our sewer hoses & adapters. My husband & neighbor put the new bumper on in 2 h; it did require drilling new holes in the frame but that was easy enough & well worth it. This bumper is exceptionally strong, has a great finish and has a much better solution for closing the ends than your typical end caps. We also bought the 2” Shake-Stopper Hitch Receiver and it mounted in about 20 min. It is super strong and as advertised - it makes a very solid connection with the bumper. Highly recommend both
by: Kevin 10/25/2023
Always fast and easy.
by: Samuel07/02/2023
by: Michael 05/02/2023
15
15
See what our Experts say about this Mount-n-Lock Accessories and Parts
- Is Curt Bumper Mounted Hitch Receiver Safe to Use on a 2022 Grand Design Imagine XLS Travel TrailerThe Curt RV Bumper 2" Trailer Hitch Receiver # E-100 is a universal hitch fit that can be installed on your 2022 Grand Design Imagine XLS Travel Trailer as long as it has a 4"x4" bumper. While this hitch does have a 350 lb weight rating, if your bumper isn't rated for very much weight then it is still possible to overload your bumper even if you haven't gotten close to the weight rating of the hitch so it's best to check the weight rating for your bumper as well. If the weight of the rack...
view full answer... - Recommendation For Increasing Strength of Rear Bumper Attached to Spacers Off Of Trailer FrameI do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper # MNT43VR which you will then be able to add the Extensions # MO24VR. This will allow you to reach your frame and have bolts into the thicker frame material. The Mount-n-Lock SafetyStruts # MO22FR you found will help with the bumper attachment to the spacers the manufacturer...
view full answer...
- Ways To Add a Bike Rack Behind an RV Without a Factory Installed Rear BumperWith your RV not having a rear bumper you will have a couple options and I recommend collaborating with the trailer manufacturer to determine which is going to work best. First and the easiest is going to be installing a Adjustable Width Trailer Hitch Receiver for RVs # 13703. This will allow you to carry a bike rack like the Swagman E-Spec Bike Rack # S94FR in the receiver. Another option which may be the smartest is installing the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper # MNT43VR....
view full answer... - Is There a Hitch Mount Version of the 24x84 etrailer Cargo Carrier for RV BumperI do have some options for you but you'll notice the 24x84 etrailer Cargo Carrier for RV Bumper part # e96ZR has three points of contact which is what allows it to support such a long load. The 24x60 Curt Cargo Carrier for 2" Hitches part # C18151 for example on the other hand only has a single point of contact, therefore you're maxed out at 60" which is about the limit for a hitch mounted cargo carrier. If you don't have a rear square bumper, you can always add one with something like...
view full answer... - Will the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper Fit a 2020 Lance 1685 Travel TrailerYes, the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper # MNT43VR can be mounted on your 2020 Lance 1685 travel trailer. You will need to cut the factory bumper off and mount the included brackets to the extensions off the frame for the factory bumper.
view full answer... - Can Mount-n-Lock Heavy-Haul'r Replacement RV Bumper # MNT43VR Fit Four Winds 22E Class CYes, the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper # MNT43VR would work for your Four Winds 22E as it was designed to fit standard RV frame styles like what you have. If your frame is shorter (front to back) than the body of your RV you would need he extension part # MO24VR.
view full answer... - Best Way to Tow a Trailer and Attach a Motorcycle Carrier to the Same HitchTo tow your Lance trailer and haul a motorcycle carrier off of your F-250's hitch, I recommend the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers item # 325-GH-515. This adjustable ball mount has five 2" receiver openings that will allow you to use both a hitch mounted motorcycle rack and tow your trailer. This double ball mount has a 1,500 lbs tongue capacity and a 12,000 lbs towing capacity. If you have a 2-1/2" receiver you will want the Gen-Y Adjustable 2-Ball Mount w/ Stacked...
view full answer... - Replacement Bumper Recommendation for a 1998 Grumman Olson TruckThe closest thing we'll have to fitting what your 1998 Grumman Olson needs is a bumper from Mount-n-Lock. I recommend going with a 4" wide option which measures 92" long: - Glossy Black # MNT43VR There are a handful of ways to install these bumpers so I've linked our selection for you to filter through and see if any of them will match with your truck.
view full answer... - Is The Rear Bumper On 2016 Lance 1985 Strong Enough To Support Carrying a Spare Tire? As Lance did not position the spare tire on the rear bumper I would say it is not strong enough to support any additional weight. We do have the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper # MNT43VR which is rated for up to 500lbs and includes a stronger bumper tube and mounting brackets. This will allow you to add the Ultra-Fab Folding Spare Tire Carrier # UF15-954730 along with Cargo Tray # MNT54FR for additional gear.
view full answer... - Availability of Rubber End Caps for Mount-n-Lock Heavy-Haul'r Replacement RV BumperThe review we have that references this was for the # MNT43VR which is the 4" bumper. Standard endcaps like the # CAM40303 or whatever is on your current bumper would likely fit on the end. The customer in the review reused their old caps from the previous bumper instead of the metal plates. If you're wanting the # MNT63VR which measures 5-5/16" there is no option for alternate endcaps for the bumper. You may be able to get the hose in there since there is additional space compared to...
view full answer... - Replacement Rear Bumper For a 2000 Itasca Spirit on Ford E-350 ChassisIt appears you will be able to replace the factory bumper on your 2000 Itasca Spirit with the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper # MNT43VR. This bumper is 4" square and 92" long. It uses mounts which can be attached to several different frame types. You will want to verify the rear portion of your Ford E-350 chassis has enough material to mount the bumper as this portion is often modified by the camper manufacturer.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Written by:
Mary K
Updated by:
Wilson B
Edited by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
9/15/2023
Oh no! I am so sorry to hear that. Do you know the make and model of the bike rack you used?