Installation Hardware for Lippert Components Tailgate Storage System
(2 reviews)
Price: $130.10
In Stock
Installation Hardware for Lippert Components Tailgate Storage System
Item # LC373965
Our Price: $130.10
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (2)
- Q & A (0)
- Videos (1)
- Photos
Lippert Accessories and Parts - LC373965
- RV Cargo Carrier
- Tailgate Storage System Parts
- Hardware Kit
- Lippert
Features:
- Install your Lippert Components tailgate storage system (358682 or 243621 - not included) with this hardware kit
- Brackets attach to support arms on the chassis to provide a location for your flip-down storage rack to attach and pivot
- Quantity: 1 hardware kit
373965 Installation Hardware for Lippert Components Tailgate Storage System
Video of Installation Hardware for Lippert Components Tailgate Storage System
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Lippert Components Flip DownTailgate Storage System Review
Colin: Hey everyone, I'm Colin 00:00:01 here at etrailer, and today we're gonna take a look at Lippert Components Flip Down Slotted Rack Tailgate Storage System for coaches and RVs.Now this is a great way, and cost effective way, to add storage on the outside of your RV or coach. So you don't have to get anything on the inside of your vehicle, and you can get that extra storage capacity to take your cargo with you wherever you're going.When not in use, it folds up to your RV to minimize the amount of length you've added on to the back of your camper or RV. But when you wanna use it, it'll fold down very easily. Just remove both pins from each side, just the top pins. And it'll fold down. And it's got those rubber bump stops on the other side.
We're just gonna replace the pins to hold it in place.And when it's loaded down you're gonna have a lot of storage space. We're gonna measure from inside rail to inside rail, 'cause that's our usable cargo space. From inside rail to inside rail on our width, we're going to have 66-1/2 inches. Then our length inside rail to inside rail, that's gonna be 24 inches.We're also gonna have an optional vertical bike support that stows right here on the back of our rack. When you wanna use it, you just pull it out, pull the pin out.
You wanna make sure that this eye bolt is facing towards your camper or RV. Put in that slot, put in your snapper pin, and from here you can load up your bikes, you could even put the tires into the slots right there. And then basically what you wanna do is take a bungee cord, ratchet set, anything like that, and run it through your eye bolt right there, take it around your bikes, and basically just tie 'em all together against this support post.The slotted design's gonna make for easy cleaning. So if you got a lot of kind of muddy gear that you don't wanna haul on the inside of your camper, or on the inside of your truck, you're gonna be able to just spray it right off when you're done using it. And it's gonna be ready for use the next time.On both sides, we're gonna have these rubber bump stops that are gonna act as support for the weight we're putting on, but also take out a lot of the vibration that would occur while we're traveling, even at high speeds.One thing you wanna make sure you know is that these brackets do not come with your kit, you're gonna have to purchase those separately, and you find them here at etrailer.
Once you have the brackets on, your rack is going to come with four pins and clips, two of 'em are going to secure your rack into the brackets. Now the other two are gonna be the ones you want to remove for when you wanna fold your rack up and down.And that's gonna do it for our look at Lippert Components Flip Down Slotted Rack Storage System.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
Customer Reviews
Installation Hardware for Lippert Components Tailgate Storage System - LC373965
Average Customer Rating: 5.0 out of 5 stars (2 Customer Reviews)
by: Greg09/06/2020
The product fit excellent it worked out for everything I needed to do
by: Danny 07/14/2021
2
2
See what our Experts say about this Lippert Accessories and Parts
- What Size Frame Will the Hardware for Lippert Tailgate Storage System LC373965 FitI have attached a photo for you with all of the dimensions I have for the Installation Hardware for Lippert Components Tailgate Storage System part # LC373965. If you need something that is not listed just let me know and I can go out to our warehouse and measure this for you. The Installation Hardware for Lippert Components Tailgate Storage System is designed to attach to a 2x4 steel bumper extension that goes in between the i-beam frame on your trailer and the 4x4 steel bumper. There...
view full answer...
- Which Brackets to Use with Lippert Tailgate Storage SystemThe Lippert # LC432336 is designed to fit on a variety of trailers, but we don't have specific fit information for each individual trailer. The # LC432336 is designed to fit on trailers that do not have the 4 inches of clearance required to install the # LC373965, so you'll want to measure whether or not you've got the required 4" between the trailer and the bumper. Both of these brackets are designed to work with the Tailgate Storage System # LC243621.
view full answer... - Do Bumper Brackets of Lippert Components Flip Down Slotted Bike Rack Weld or Bolt OnThe brackets part # LC373965 that you referenced of the kit part # LC243621 basically either bolt around or weld to the bumper support beam on the RV. I attached a picture that shows them welded which is what you saw in the install video but you could also drill holes in the bumper and use included hardware to secure the brackets.
view full answer... - Will the Harware Kit for the Lippert Tailgate Storage System Work with an Entegra Esteem Class CThe Installation Hardware for Lippert Components Tailgate Storage System # LC373965 for the Lippert Components Flip Down Slotted Bike Rack Tailgate Storage System # LC243621 is not vehicle specific. The hardware kit is designed to bolt or weld to the 2 inch wide frame extensions, as is shown in the provided photo. If the frame extensions holding the rear bumper in place on your travel trailer are 2 inches wide and provide at least 4 inches of distance between the edge of the bumper closest...
view full answer...
- Correct Mounting Brackets for the Flip Down Slotted Bike Rack Tailgate Storage System LC243621The Installation Hardware # LC373965 is designed for the Lippert Components Flip Down Slotted Bike Rack Tailgate Storage System # LC243621, while the Lippert Tailgate Storage System Mounting Kit # LC432336 is for the Lippert Components Tailgate Storage System # LC404069 instead. So if you're wanting to use the Tailgate Storage System # LC243621 you need the Installation Hardware # LC373965.
view full answer... - Will the etrailer Cargo Carrier for RV Bumpers Work with 4-1/2" x 4-1/2" Square Bumper The best option we have for a 4-1/2" x 4-1/2" RV bumper is the Lippert Components Flip Down Tailgate Storage System part # LC243621 which can be mounted using the Lippert Tailgate Storage System Mounting Kit part # LC432336 or part # LC373965 depending on your setup. Unfortunately, I can't recommend modifying the etrailer Cargo Carrier for RV Bumpers like part # e83YR.
view full answer... - Hardware Required To Mount Lippert Tailgate Storage System To RV Trailer With Less Than 4" ClearanceSince you do not have the 4" of clearance to mount the Installation Hardware # LC373965 for the Lippert Components Flip Down Slotted Bike Rack Tailgate Storage System # LC243621, you will need the Lippert Tailgate Storage System Mounting Kit - Over Bumper # LC432336. This hardware allows you to mount the brackets on top of your trailers bumper. Depending on your travel trailer it may be necessary to lower the underbelly to access the frame for mounting these brackets.
view full answer...
- Fit of Lippert Tailgate Storage System on 2021 Grand Design Image Travel TrailerThe Lippert # LC373965 install hardware kit for the # LC243621 flip-down tailgate storage system isn't vehicle specific. The hardware kit is designed to bolt or weld to the 2 inch wide frame extensions, as is shown in the provided photo. If the frame extensions holding the rear bumper in place on your travel trailer are 2 inches wide and provide at least 4 inches of distance between the edge of the bumper closest to the travel trailer and the back of the travel trailer, the # LC373965...
view full answer...
- Aluminum Cargo Carrier Compatibility With 2017 R-Pod Travel TrailerWe have a couple of aluminum storage components but they are not foldable. The Mount-n-Lock GennyGo Generator and Cargo Carrier for RV Bumpers - Aluminum - 125 lbs # MNT77FR or 250 lbs # MNT67FR. Your other option is to use a RV trailer hitch receiver like # C13704 and then the Flint Hill Goods 30" x 50" Wheelchair Carrier w/ 48" Ramp - 2" Hitch # FHG77ZR. If you want the bumper mounted fold down storage, we only have the Lippert Components Flip Down Slotted Bike Rack Tailgate Storage...
view full answer... - What Frame Dimensions Does Installation Hardware Lippert Tailgate Storage System # LC373965 FitThe Installation Hardware for Lippert Components Tailgate Storage System # LC373965 is designed to attach to a 2x4 steel bumper extension that goes in between the i-beam frame on your trailer and the 4x4 steel bumper. There also need to be at least 4" of space on the 2x4 steel bumper extension between the trailer and bumper in order for this to work.
view full answer...
- Does Installation Hardware # LC373965 Require DrillingWhen installing the Installation Hardware # LC373965 you do not need to drill. The hardware bolts over the frame like you mentioned.
view full answer... - Bumper Mounted 5TH Wheel and Travel Trailer Bike Rack For Carrying 4 BikesThe Lippert Components Flip Down Slotted Bike Rack Tailgate Storage System # LC243621 is designed to only carry 3 bikes when you configure it as a bike rack. This storage system also requires a Installation Hardware Kit # LC373965 to mount the rack. To carry 4 bikes the Swagman 4 Bike Carrier RV Mounted Bike Rack # S80600 will mount to a 4" to 4-1/2" square tube bumper. It is a fixed position carrier and will not fold up like the Lippert Rack.
view full answer... - How Wide Are the Brackets That the Lippert Components Tailgate Storage System Mount ToThe Lippert Components Flip Down Slotted Rack Tailgate Storage System part # LC243621 actually attaches to the bumper support brackets using the Installation Hardware for Lippert Components Tailgate Storage System part # LC373965. The bumper support brackets are a standard size, about 2-1/4 wide so there should not be any issues here. However, you do need to ensure you have at least 4" between the bumper and trailer so you have enough space for the brackets to mount. I have attached a...
view full answer...
- How Much Space Is Needed for the Lippert Components Tailgate Storage SystemThe Lippert Components Flip Down Slotted Rack Tailgate Storage System part # LC243621 installs using the Installation Hardware for Lippert Components Tailgate Storage System part # LC373965 which requires 4" of space between the bumper and trailer. If you do not have this much space then you will need to find a way to extend your bumper out or have a set of custom brackets made but we do not offer any specifically for this purpose.
view full answer... - How Does Installation Hardware for Lippert Components Tailgate Storage System InstallThe brackets part # LC373965 that you referenced basically either bolt around or weld to the bumper support beam on the RV. I attached a picture that shows them welded but you could also drill holes in the bumper and use included hardware to secure the brackets. The kit this fits is the Lippert Components Tailgate Storage System which is designed to attach to a 2x4 steel bumper extension that goes in between the i-beam frame on your trailer and the 4x4 steel bumper. There also need to...
view full answer...
- Dimensions of Brackets of Lippert Mounting KitThe Installation Hardware Brackets # LC373965 measures 10.26 inches long, 3.99 inches deep and 2.48 inches wide. I have added a photo showing the dimensions of these brackets for you to take a look at, which will help you figure out if they will work for you.
view full answer...
- How Much Space is Needed For the Installation Hardware of Lippert Components Tailgate Storage SystemThe Installation Hardware for Lippert Components Tailgate Storage System # LC373965 requires 4" of space between the bumper and trailer. If you do not have this much space then you will need to find a way to extend your bumper out or have a set of custom brackets made, but we do not have any hardware brackets that fit with only 1" of space between the trailer and bumper.
view full answer... - Could Lippert Tailgate Storage System Fit 2020 Rockwood 2506S and How Does it InstallThe brackets part # LC373965 that you referenced basically either bolt around or weld to the bumper support beam on the RV. I attached a picture that shows them welded but you could also drill holes in the bumper and use included hardware to secure the brackets. Most likely yes this would fit your 2020 Rockwood 2506S Mini Lite. The kit this fits is the Lippert Components Tailgate Storage System # LC243621 which is designed to attach to a 2x4 steel bumper extension that goes in between...
view full answer...
- How Does the Lippert Tailgate Storage System Install On a BumperHey Jarvis, the Lippert Tailgate Storage System # LC404069 would install using either the Lippert Tailgate Storage System Mounting Kit # LC432223 or # LC432336 and the Installation Hardware for Lippert Components Tailgate Storage System # LC373965. To answer your second question, the tailgate storage system # LC432223 would install under the bumper and # LC432336 would install over the bumper.
view full answer... - Need a Platform Style Bike Rack for Travel Trailer to Haul Heavy BikeWe do not currently have available a platform style bike rack that is rated for being used on a travel trailer. Due to suspension design, there is a rougher ride with travel trailers than passenger vehicles that have better developed suspension systems. Add to this the fact that travel trailers are towed, allowing sway from connection point, you need a more durable bike rack to withstand the torque and movement applied when loaded with a bike(s). There is a fairly wide selection of...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Edited by:
Lindsey S
Video Edited:
Chris R
Written by:
Kristina F
Updated by:
Mike S
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.