Replacement Circuit Board for MaxxAir Roof Vent with Manual Lift and Reversible Motor

Question

Question:

I need a motherboard replacement for a maxair fan that is a manual life reversible fan. Which replacement part do I need in your stock?

asked by: Tim

0

Expert Reply:

For Maxxair roof vents that have a manual lift and a reversible fan you'd want the part # MA10A21276K.

expert reply by: Jameson C

0

Answer 1

The correct circuit board for your MaxxAir MaxxFan 4951KS fan is the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. It also works with The MaxxAir MaxxFan 4751KS and 4761KS models as well.

view full answer...

Answer 2

Unfortunately, the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan #MA10A21275K you ordered would not be the correct circuit board. The correct circuit board is the Replacement Printed Circuit Board for…

view full answer...

Answer 3

Its very likely you do need just a new circuit board for your Maxxfan Deluxe which would require the part #MA10A21276K that you referenced. You troubleshooted that everything has power like it should so that eliminates the problem to being the…

view full answer...

Answer 4

We do have the exact replacement circuit board you need for your MaxxFan Deluxe Roof Vent w/ 12V Fan and Thermostat - Manual Lift #MA00-06200K, which is the following part: - Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents…

view full answer...

Answer 5

The MaxxFan circuit board part #MA10A21276K is what you are looking for. This is the current version of the board that is compatible with lithium batteries that have higher voltage.

view full answer...

Answer 6

Have you tried reconnecting your fan? Sometimes the circuit board will go a little haywire and disconnecting the vent from power for about 5 minutes will reset the board. Since you have the manual lift I would think that the Replacement Circuit Board…

view full answer...

Answer 7

Sounds like the circuit board of the MaxxAir vent is fried and in need of replacing which we offer with the part #MA10A21276K.

view full answer...

Answer 8

The correct replacement circuit board for a MaxxAir Vent Fan 5100K is the Replacement Printed Circuit Board for MaxxAir Manual Lift RV Roof Vents part #MA10A21276K.

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The model number for fans such as the MaxxAir MaxxFan Mini Roof Vent, #MA00-04401M is listed on the upper side of the assembly itself. Please see the attached image. You will best identify this by opening the vent and climbing on top of the RV.…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Replacement Circuit Board for MaxxAir Roof Vent with Manual Lift and Reversible Motor

Product Page this Question was Asked From

Continue Researching