Replacement MC4 Expansion Branch for Go Power Solar Panels - 1 Male and 2 Female

See what our Experts say about this Go Power Accessories and Parts

• Can Additional Panels Be Added Into A Go Power Solar Panel System
  Hi Robert, The amount of panels you can have is going to depend on their output and the maximum input capacity of the solar controller. For example, the Go Power MPPT Solar Charge Controller # GP54FR you were looking at has a maximum input of 1040W @ 12V; 2080W @ 24V; 3120W @ 36V; and 4160W @ 48V. The Go Power 40 amp MPPT Solar Controller you currently have has a maximum input of 600W @ 12V or 1200W @24V. Go Power doesn't currently offer panels at 300 watts so you likely have a 100...
  view full answer...
• Using Other Solar Panels to Create Go Power Solar Extreme Charging Kit
  To create the Go Power Solar Extreme Charging System # 34282552 without the solar panels would take quite a bit of piecing together. But at it's core would be the Go Power Pure Sine Wave Inverter # 34279953, the remote controller # 34277742, the install kit # 342GPDCKIT4, and the solal power controller # 34276119, the # 2 of the part # 34267040, 2 of the # 34267049, and # 34273843REVA.
  view full answer...
• Y-Connectors To Split Cable to Solar Charge Controllers For Standard MC4 Connections
  To split the cables coming from your solar panel you will need one each, Go Power # 34267049 Expansion Branch 1 male / 2 female, and Go Power # 34267040 Expansion Branch 1 female / two male, connectors. This assumes that you are using standard MC4 connectors rather than some proprietary cables such as you might find on a Furrion panel. Of course you will need two more cables. If you let me know the length I can spec those also. If you still need charge controllers you could use the Go...
  view full answer...
• Roof Mount Solar Panel Compatibility with MC4 Connection Entry Plate
  The Go Power Cable Entry Plate w Red and Black MC4 Cables - 10' Long # 34273842REVA uses the industry standard MC4 cables, so you can connect other brands of solar panels. You will want to use cables like # 34279532 or adapters like the Go Power MC4 Expansion Branch w 1 Female Connector and 2 Male Connectors # 34267040 or # 34267049 to help you wire multiples in parallel.
  view full answer...
• Hardware, Wiring, and Entry Plate Needed for 190W Go Power Solar Panels
  Each 190 Watt Go Power Overlander Expansion Kit # 34282182 comes with the following connectors and hardware which you can pick up here if you're needing a replacement: Mounting Hardware - # 34272708 MC4 Expansion Branch 1 Male and 2 Female - # 34267049 MC4 Expansion Branch 2 Male and 1 Female - # 34267040 There should also be enough wiring included with each solar panel to link them together although we do have replacements like the 3' Cord # 34274672 or 10' Cord # 34276216. If you're...
  view full answer...

Do you have a question about this Accessories and Part?