bing tracking image
  1. Solar Charge Controllers
  2. Go Power
  3. PWM
  4. 10 Amp
  5. Gel
  6. AGM
  7. Flooded
  8. Lithium (liFePO4)
Go Power PWM Solar Charge Controller with USB Port - LCD Digital Display - 10 Amp - 12V

Go Power PWM Solar Charge Controller with USB Port - LCD Digital Display - 10 Amp - 12V

Item # 34280503
Retail:$140.00
Our Price: $111.99
You Save: $28.01
Solar Charge Controllers
Shipping Weight: 0.84 lbs
Add to cart
In Stock
Go Power 10 Amp Solar Charge Controllers - 34280503
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Need help with installation?
Locate installers near me
10-Amp solar controller with PWM technology regulates solar panel output to provide consistent amperage to your RV batteries. Protects battery from harmful overcharging and uses automatic multistage charging to extend battery life. Great Prices for the best solar charge controllers from Go Power. Go Power PWM Solar Charge Controller with USB Port - LCD Digital Display - 10 Amp - 12V part number 34280503 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (75)
  • Q & A (0)
  • Photos

Go Power Solar Charge Controllers - 34280503

  • PWM
  • 10 Amp
  • Go Power
  • Gel
  • AGM
  • Flooded
  • Lithium (liFePO4)
  • Digital Display

10-Amp solar controller with PWM technology regulates solar panel output to provide consistent amperage to your RV batteries. Protects battery from harmful overcharging and uses automatic multistage charging to extend battery life.


Features:

  • 10-Amp solar controller prevents harmful overcharging of your RV batteries
    • Monitors and adjusts output from your solar panels
  • Digital PWM technology regulates panel output to provide a consistent charge
  • Automatic multistage charging switches modes as the battery charges - helps extend battery life
    • Preset charging profiles for sealed/gel, AGM, flooded, and lithium batteries
  • Backlit, digital LCD display monitors current, voltage, and state of charge
  • USB port provides an outlet to charge small electronic devices
  • Built-in safety features protect your RV's electrical system
  • Easy mounting with included hardware


Specs:

  • Application: 12V battery and solar systems
    • Works with sealed/gel, AGM, flooded lead acid, and lithium iron phosphate batteries
  • Maximum solar array current: 10 amps
  • Voltage:
    • Battery range: 6 - 15.5V
    • Maximum solar panel input voltage: 28V
  • Operating temperature range: -40 F to 140 F
  • Temperature compensation: -13mV per F
  • Maximum wire gauge: #4 AWG
  • Weight: 0.39 lbs
  • Dimensions: 5-7/8" wide x 3-7/8" tall x 1-1/4" deep
  • 5-Year warranty


This solar controller prevents harmful overcharging by adjusting the power generated by a solar panel before it reaches your RV batteries. It uses pulse width modulation technology to regulate the output through pulses that provide a consistent charge. Typically, this type of technology is a good fit for smaller systems with lower voltages.


Automatic Multistage Charging System

Using a multistage charging system, the controller automatically switches voltages while the battery bank charges. This accelerates the charge, but also helps extend battery life by adjusting the voltage during the different modes. The controller is compatible with multiple battery types and includes preset charging profiles for sealed/gel, AGM, flooded/wet cell, and lithium batteries.


Charging Modes

  1. Bulk: This mode charges at the full rated load for a quicker recharge time. As the name suggests, this is where the bulk of the charging happens. It typically charges the battery to at least 80% capacity.
  2. Absorption: This mode provides controlled voltage to ensure a full charge. Once the battery reaches between 80% to 90% capacity, the absorption state will kick in and start charging at a regulated voltage. In each charging profile, this mode is set to last for 30 minutes after the bulk charge is completed.
  3. Float: Once the battery reaches full charge, this mode maintains a lower voltage to compensate for self-discharge. This reduces battery stress and minimizes gassing and water loss.
  4. Equalization: On flooded/wet cell batteries, this mode activates to prevent stratification and sulfate buildup during extended float cycles. These two issues can damage a battery by causing the accumulation of acid at the bottom of the battery and hardened sulfate crystals on the battery plates. This mode is especially helpful when your battery is going unused during storage.

Practical, Convenient Features

The backlit, digital display acts as an information center for your solar panel output. It shows the charging current, battery voltage, and battery state of charge. It also allows you to input your battery type and choose a charging profile. Additionally, a built-in USB port on the front of the controller provides a convenient outlet to charge your cell phone or tablet.


Lastly, the controller includes several built-in safety features to help protect your equipment. The charging process will shut down if the controller starts to overheat and when an overcurrent is detected. Also, if the battery or solar panel is wired incorrectly, it activates a reverse polarity alarm.


How It Installs

The solar controller flush-mounts to a wall inside your RV. It is wired to the solar panel using MC4 cables. Then, the battery bank is wired to the terminals on the controller. You can also install a fuse or circuit breaker (sold separately) up to 10 amps between the solar controller and battery for additional current protection.



GP-PWM-10-FM Go Power! Digital Solar Charge Controller - PWM - USB Port - Flush Mount - 10 Amp

Replaces Go Power GP-PWM-10-USB

Installation Details 34280503 Installation instructionsAlternate Instructions 34280503 Installation instructions



Customer Satisfaction Score:


Customer Reviews

Go Power PWM Solar Charge Controller with USB Port - LCD Digital Display - 10 Amp - 12V - 34280503

Average Customer Rating:  4.7 out of 5 stars   (75 Customer Reviews)

10-Amp solar controller with PWM technology regulates solar panel output to provide consistent amperage to your RV batteries. Protects battery from harmful overcharging and uses automatic multistage charging to extend battery life.

by:

This was a replacement controller I installed to allow the solar panels to work with lithium batteries. It works great.

William

3/3/2024

Still working fine.



by:

Ideal for DIY retirees with too much time on their weathered hands. Our RV was prewired. All we had to do was install the controller and solar panel. Ni more utility bills surge as long as the weather plays nice. We highly recommend GoPowr for solar charging on a budget.



by:

No news is good news. It is functioning as would be expected. The only difference is that I had to change the mounting from horizontal to vertical to accommodate the mounting brackets, other than that it works great



by:

Good quality good price and fast shippi ng.



by:

working like a champ!



by:

I am disappointed! Contra to the detailed product information that is advertised on your website for this controller, the solar controller unit I received, DOES NOT handle / charge lithium batteries! Like I explained to CS prior to submitting my order, the description of the controller on the website, does not match the actual item being sent and please check it before shipping! So, buyer beware, if you want a controller that will charge lithium batteries DO NOT order/purchase this item from etrailer!

Etrailer Expert

Brooke M.

12/5/2022

I contacted the manufacturer and it looks like you may have received and older model. The up to date models, like the ones in stock now, do in fact have the capacity to charge lithium batteries like the product descriptions says. I will have our customer service team reach out to you about this to make sure you are taken care of.



by:

I am not sure about the solar charge controller as I will not use it for some time. Pual B was outstanding to help with the wheel. I realized that I ordered the wrong wheel but then called right back and he helped get the right wheel and get the order out. It was good to be able to talk to someone and your service was very good.



by:

Works great no problems at all.

Wesley

2/6/2023

After a year its still working great. Had no problems whatsoever.



by:

Great product, nice update to my old Go Power.



by:

Every time I call with an order Karen is amazing! She is the friendliest and most helpful associate I've dealt with.



by:



by:



by:



by:



by:



by:



by:



by:

Excellent choice for a single 100w panel mounted on a vehicle. Space is at a premium so this being about the size of a deck of cards and being completely sealed makes it possible to mount in the engine bay. Price is right and I can verify it does exactly what I’d expected keeping 2 Odyssey batteries topped off while running a fridge/lights/charging devices in my 99 Tacoma.



by:

Brought this as a upgrade to my original GP-PWM-30 which did not specifically support a Lithium battery profile. Also for the remote Bluetooth Android App. Looked around for a MPPT solar controller that supported Dual Battery Banks without finding a suitable one. So I want back to this GoPower brand of PWM controller that did. It has performed as expected and the upgrades made seem to have increased the amount of AmpHours drawn from my solar panels by a small amount. I still wish it had been fully upgraded to a MPPT controller.



by:

I like your tracking software. The order was delayed because of poor weather conditions in Kansas City but still came to me on the expected date. All was in good condition. I replace the old controller with this updated one and it was a simple install and the whole system works great now. Thanks



by:

etrailer.com is our go-to source for our trailer and motorhome parts and upgrades. We've always been more tha pleased with not only their service and prices but also the quality of the website including the product descriptions and expecially the helpful videos. This most recent purchase, a GoPower Solar Charger is awesome! This is a direct replacement for our failing Speciality Concepts Mark PV Controller. This unit fit perfectly into the existing opening and the mounting screws lined up. This GoPower controller charges the battery bank considerably faster and far more efficiently. Our battery voltage memains higher and the "boost" feature quickly tops off the battery during higher useage. As an added bonus, this is able to charge a secondary battery bank which we use to charge and maintain the engine batteries in our motorhome. Finally, it's easy to use and can handle many battery types including Lithium. What a great value!



by:

This is an upgrade to the original Go-Power Solar Controller that came with my Lance TT. It will easily handle the increased production from the additions of a portable solar generator. The small increase in the backside dimensions forced me to slightly increase the opening to allow it to fit. The screw holes aligned perfectly. Before buying a replacement for your unit that has a malfunctioning display screen, you might try to disconnect the battery then return the power... it might reset for you.



by:

No complaints works as advertised. Good product. Installed in my 27 FB airstream.



by:

This dual bank controller is what every RV needs. It charges the camper first as primary, then charges the chassis starting battery secondary. Never a dead starting battery since. RV sits all winter to full charged batteries in the Spring.



by:

This unit replaced the one in my Lance 855S that did not have bluetooth and it has been working great. Based on the odd mounting place that Lance used, this unit is very handy with the bluetooth and pairing it with my phone to show the information that I like to see occasionally such as amps coming in, state of charge, etc. etrailer was very quick with shipping the unit and I would certainly consider them for a future purchase.


25
75
Show More Reviews

See what our Experts say about this Go Power Solar Charge Controllers

  • How to Fix the Blinking Icons on My Go Power Solar Panel # 34282610
    Sorry to hear about your controller! I went ahead and investigated this issue, and I discovered that if the controller of the Go Power Solar Panel # 34282610 continuously blinks on and off with all icons, the # 34280503 controller is receiving a battery voltage that is too high (over 15.5 volts). Once the voltage decreases below 15.5 volts, the controller will function normally. I attached a photo from the instructional manual that shows this error message. After decreasing the voltage,...
    view full answer...
    Image 1 for
  • Will A 30 Amp Solar Charge Controller Charge Batteries Faster Than A 10 Amp Solar Charge Controller
    Hi Donald, Yes, a higher amperage charger, like the # GP76QR (30 amp), would be able to provide a faster recharge for your battery bank than a 10 amp controller like the # 34280503. When adding in the second battery you'll want to wire it in parallel with first battery and the charge controller can be still be wired to the first battery. Adding in a higher amperage controller doesn't mean that you'll automatically get more amperage though. You're still limited to the output of the panels...
    view full answer...
  • Adding A Solar Panel Extension To An Existing System
    Since you'll be over the 10amp max rating on the solar controller you'll just need to add another solar controller ( # 34280503 ) in to your Go Power Eco Solar Charging System with Digital Solar Controller - 80 Watt Solar Panel Item # 34272627 system to have enough space for the Go Power Solar Flex Expansion Kit - 110 Watt Solar Panel # 34272629 to be added on and function properly.
    view full answer...
  • Do I Need a Solar Panel Controller for My Solar Pre-Wired Camper
    If your 2022 Coleman 17B is already setup for solar then it may already have a solar controller so you wouldn't need an additional one. It doesn't hurt to double check though so definitely look at your setup and see if you have the controller. If you don't have a solar panel controller then you need to pick one up, like the Go Power PWM Solar Charge Controller # 34280503, so it can send the proper charge to your trailer battery. Attached is a review video for you to check out.
    view full answer...
  • How Does Solar Panel Controller Connect to Battery Bank that's in Parallel
    Basically you would want to wire the solar panel controller the same way as the battery bank is wired (in parallel). So on the main power and ground wires that run to the rest of the RV for power. This will make sure the bank is charged evenly.
    view full answer...
  • Can A Second Solar Panel Be Added Into A Solar Panel System
    You can put two 80 watt panels together, but you'll want to just confirm the maximum amperage of your system's controller to ensure that both panels don't exceed this capacity. If we look at the Go Power Eco Solar Charging System - 80 Watt Solar Panel # 34272627 the panel can produce 4.57 amps and the included solar charge controller can handle up to 10 amps. If you added a second 80 watt panel you'd fall under the 10 amp maximum of the charge controller at 9.14 amps, but Go Power as well...
    view full answer...
  • Can BrakeBuddy Towed Vehicle Battery Charge Kit Be Used with a Solar Panel
    The BrakeBuddy Towed Vehicle Battery Charge Kit # BB54FR can be connected to a solar panel but you'll definitely want to use a solar charger to keep from overcharging the battery. The Go Power PWM Solar Charge Controller # 34280503 can work for this but you might also check to see if there is a controller designed specifically to work with your solar panel that you can connect the battery charge kit to.
    view full answer...
  • Go Power Industrial Pure Sine Wave Inverter Charger and MT50 Controller
    The Go Power Industrial Pure Sine Wave Inverter Charger, # 34280055, that you reference, can be in the same system with with your MT50 controller but you will not have full functionality. This 2,000-Watt inverter charger combines a pure sine wave inverter, converter charger, and automatic transfer switch. It saves space and simplifies installation by consolidating 3 vital components into 1 compact unit that includes fixed-mount remote. You can keep the MT50 in place but depending on how...
    view full answer...
  • Compatible Solar Panels For A Go Power Solar Panel System
    You would need to replace your panel with another Go Power branded solar panel but if your solar charge controller can handle a higher wattage you could add a higher wattage panel to your system. For example the 30 amp charge controller # 34280503 can handle up to 600watts so if you were only using two 100watt panels and wanted to replace one you'd have enough capacity to add a higher wattage panel like the # 34282181. You will want to leave about 25% of your solar charge controller's capacity...
    view full answer...
  • Y-Connectors To Split Cable to Solar Charge Controllers For Standard MC4 Connections
    To split the cables coming from your solar panel you will need one each, Go Power # 34267049 Expansion Branch 1 male / 2 female, and Go Power # 34267040 Expansion Branch 1 female / two male, connectors. This assumes that you are using standard MC4 connectors rather than some proprietary cables such as you might find on a Furrion panel. Of course you will need two more cables. If you let me know the length I can spec those also. If you still need charge controllers you could use the Go...
    view full answer...
  • Solar Charge Controller Question
    Your solar panels do not connect directly to the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger, # PD4060K. You will want to connect your solar panel system to the battery bank using a charge controller such as the Go Power PWM Solar Charge Controller with USB Port, # 34280503. or the Furrion MPPT Solar Charge Controller - 50 Amp - 12V/24V, # FSCC60PWBBL depending on the type and size of your battery bank. I have attached a few help articles on solar panels....
    view full answer...
  • How To Check Solar Panel Output
    Good question. We do not have a particular unit that you can just add to the Furrion MPPT Solar Charge Controller - 50 Amp - 12V/24V # FSCC60PWBBL or any other solar panel set up to monitor the system. The backlit digital display on the Go Power PWM Solar Charge Controller with USB Port - LCD Digital Display - 10 Amp - 12V # 34280503 acts like an information center and will tell you chargin current, battery volts and battery state of charge. You can use a multimeter and turn the dial...
    view full answer...
  • Options for Go Power Inverter
    The Go Power Industrial Pure Sine Wave Inverter Charger is a 2,000 Watt, 100 Amps unit at 12V, # 34280055. It is a 3-in-1 unit as it combines the functions of a pure sine wave inverter, converter charger, and automatic transfer switch all in the same unit. Please see the attached product review video. If this inverter is larger than you need/want there are multiple other options available. With or without a transfer switch or charger built in. I strongly suggest that only a pure sine...
    view full answer...
  • Can Go Power PWM Solar Charge Controller Be Setup for 2 Different Battery Bank Profiles
    Yes, the Go Power PWM Solar Charge Controller with Bluetooth # 34280503 allows you to set up different charging profiles for different battery bank types. It will switch to that pre-set profile automatically when it switches back and forth between the battery banks. Attached is a review video and the installation instructions for you to check out.
    view full answer...
  • Wiring and Installation of Go Power PWN Solar Charge Controller # 32480503
    The wiring diagram for the Go Power PWM Solar Charge Controller # 34280503 can be found in the manufacturer's user manual and I attached a copy of it below. To install the controller, first pick an appropriate location and mount the controller using the included hardware. This should be as close to the battery as possible, on a vertical surface, and indoors to protect the unit from weather damage. Next, run wires from the positive and negative battery terminals to the controller according...
    view full answer...
    Image 1 for
  • Replacement Solar Charge Controller for Go Power Portable Solar System
    You can use the Go Power PWM Solar Charge Controller with USB Port - LCD Digital Display - 10 Amp - 12V # 34280503 to replace the solar controller on your Go Power 80W system.
    view full answer...
  • Solar Charging System for RV with 6V and 12V Batteries
    In order to have multiple solar panels provide trickle re-charging to an array of RV batteries you need to have a controller that can manage the output from the panels. My contact at Go Power! said that most 100 watt solar panels output 20 volts and this is simply to much for 12V and 6V batteries even if multiple ones are wired together. A controller like # 34280503 is essential for ensuring the panels' output is stepped down to the appropriate voltage/current to prevent overcharging. I...
    view full answer...
  • How to Tell If a 2019 Geo Pro 12RK Has a Solar Charge Controller
    To determine if your 2019 Geo Pro 12RK has a solar charger you'll either need to either call your dealer with your VIN or just look through all of the compartments to see if there is a solar charger already in place. Unfortunately when it comes to trailers the dealers like to label them as "solar ready" when most of the time that just means they either have a port on the outside and maybe some wiring ran through to connect to a charger that you have to install on your own. If this ends...
    view full answer...
  • Parts Needed to Control Battery Charge with Go Power Eco Solar Charging System
    In addition to the Go Power Eco Solar Charging System - 10 Watt Solar Panel # 34273836 you'll at least need the Go Power PWM Solar Charge Controller # 34280503 and then I recommend using an entry plate like the part # 34273841REVA to make the installation look nice as the controller will need to be on the inside of your trailer/vehicle. The entry plate I mentioned has a 10" wiring extension but if you need something longer is also comes in the following lengths: 7' - # 34276245 25' -...
    view full answer...
  • Will Go Power Overlander Expansion Kit Work with Thor Motorhome OEM Solar Panel Kit
    If your Thor Motorhome has a cable entry plate like part # 34273840 on the roof then yes, you can attach the Go Power Overlander Expansion Kit # 34282182 to it. You'll also need a controller like the PWM Solar Charge Controller # 34280503 so you can monitor and adjust the solar panel settings. All of the other wiring should be present to get things installed but sometimes motorhome manufacturers won't run everything so you'll need to check what you have to ensure you have at least the...
    view full answer...
  • Recommended Solar Charge Controller for Bluetti PV200 Watt Solar Panel
    I looked up the Bluetti PV200 Watt Solar Panel and show it draws up to 9.7 amps at max current. Therefore, a 10 amp charge controller like the Go Power PWM Solar Charge Controller with USB Port part # 34280503 will work and is what I recommend. It has multiple charging modes for different battery types, and easy to read LCD display, and a USB port for quick charging of smaller accessories.
    view full answer...
  • Go Power PWM Solar Charge Controller # 34280503 Dimensions
    The Go Power PWM Solar Charge Controller with USB Port - LCD Digital Display - 10 Amp - 12V # 34280503 has the following dimensions pictured below. Based on the dimensions you stated you most likely have the Go Power PWM Solar Charge Controller with Bluetooth - LCD Digital Display - Dual Bank - 30 Amp - 12V # 34276119. When it comes to solar charge controllers dimensions do not matter. What is most important is what amperage rating the controller has. To determine the correct rated solar...
    view full answer...
    Image 1 for Image 2 for
  • Go Power Solar Controller That is Compatible With Lithium Batteries
    There isn't a setting you can use on your Go Power solar controller for lithium batteries if it is not compatible, so you will need to upgrade your solar controller to one that is compatible. I'm not sure which solar power system you currently have, so I'll list out the options for solar controllers from Go Power, and each of these are compatible with lithium batteries. - 10 Amp: Go Power PWM Solar Charge Controller with USB Port - LCD Digital Display - 12V # 34280503 - 30 Amp: Go Power...
    view full answer...

Do you have a question about this Solar Charge Controller?


Info for this part was:

Employee Jeff D
Installed by:
Jeff D
Employee Michael B
Installed by:
Michael B
Employee Jameson C
Expert Research:
Jameson C
Employee Amanda M
Edited by:
Amanda M
Employee Halie H
Written by:
Halie H
Employee Alex H
Updated by:
Alex H
Employee Matthew E
Updated by:
Matthew E

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.