Hardware, Wiring, and Entry Plate Needed for 190W Go Power Solar Panels

Question

Question:

What connector do I use to hook 3 190W Go Pro solar panels to my RV roof?

asked by: Robert B

0

Expert Reply:

Each 190 Watt Go Power Overlander Expansion Kit # 34282182 comes with the following connectors and hardware which you can pick up here if you're needing a replacement:

Mounting Hardware - # 34272708
MC4 Expansion Branch 1 Male and 2 Female - # 34267049
MC4 Expansion Branch 2 Male and 1 Female - # 34267040

There should also be enough wiring included with each solar panel to link them together although we do have replacements like the 3' Cord # 34274672 or 10' Cord # 34276216.

If you're looking for the entry plate to connect the solar panels to the power inside your RV we have those as well with varying extension lengths like 10" # 34273841REVA or 25' # 34273843REVA.

Let me know if you're looking for something else and I can see if that's something we are able to help out with.

expert reply by: Jon G

0

Answer 1

The distance from the center of the uppermost bolt hole where it attaches to the leaf spring hanger to the center of the two bolt holes which attach to the left springs on the Equa-Flex Cushioned Equalizers part #LC279688 is 4". If this distance…

view full answer...

Answer 2

Going to a taller equalizer will add height to the trailer suspension since it moves the springs up a bit higher. But since you don't want to have the leaf springs sitting unlevel you'd be best served to go to 2 inch taller suspension hangers…

view full answer...

Answer 3

I reached out to MORryde and the MORryde Rubber Equalizers for Tandem Axle Trailers - 35" Wheelbase - 8K #MR27ZR you were looking at is designed for 35" axle spacing and would not work with your trailer with 36" axle spacing. My…

view full answer...

Answer 4

No matter what equalizers you are using, you never want to tighten down the bolts so much that your suspension won't move. This is the case even with the Equa-Flex Cushioned Equalizers #LC279688 that you referenced. If you were to torque…

view full answer...

Answer 5

The MORryde Rubber Equalizers for Tandem Axle Trailers - 35" Wheelbase - 8K #MR27ZR you were looking at measure 8" between the horizontal mounting holes, and 3-5/16" between the center of the horizontal mount holes and the vertical…

view full answer...

Answer 6

As your axles measure 35" apart from center to center but the frame hanger spread (FHS) measured 58-3/4", you did go the correct way. The axle spacing is definitely important, but the FHS is more so. Just be aware that you axle spacing may…

view full answer...

Answer 7

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 8

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 9

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 12

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...