Dexter Electric Brake Assembly for 4.4K Axles Manufactured After May 2009 - 10" - Left Hand
(34 reviews)
Price: $150.34
Dexter Electric Brake Assembly for 4.4K Axles Manufactured After May 2009 - 10" - Left Hand
Item # K23-462-00
Our Price: $150.34
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (34)
- Q & A (0)
- Photos
Dexter Accessories and Parts - K23-462-00
- Trailer Brakes
- Electric Drum Brakes
- Brake Assembly
- 10 x 2-1/4 Inch Drum
- Dexter
- LH
- 4400 lbs
- Manual Adjust
10" x 2-1/4" Driver's-side electric trailer brake assembly fits 4,400-lb axles manufactured after May 2009. Mounting flange has a 4-bolt pattern. Fits 13" to 15" wheels.
Features:
- Electric brakes are easier to install and offer more user control than hydraulic brakes
- Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary
- Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes
- Mounting bolts and hardware included
- Made in the USA
Specs:
- Application: most standard hub-and-drum assemblies, including Dexter
- Does not work with Lippert 4,400-lb axles due to clearance issues with the brake mounting flange
- Configuration: left hand (driver's side)
- Dimensions: 10" diameter x 2-1/4" wide
- Mounting flange bolt pattern: 4 bolt
- Measurement from center of top mounting stud to center of top mounting stud: 2-7/8"
- Measurement from center of bottom mounting stud to center of bottom mounting stud: 3-1/4"
- Measurement from center of top mounting studs to center of bottom mounting studs: 3"
- Wheel size: 13", 14", and 15"
- Axle rating: 4,400 lbs
- Fits axles manufactured after May, 2009
- Limited 5-year warranty
K23-462-00 Dexter 10" Manual Adjust Electric Brake Assembly for 4,400-lb - Driver's Side
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Arrived Damaged
- etrailer mistake
Customer Reviews
Dexter Electric Brake Assembly for 4.4K Axles Manufactured After May 2009 - 10" - Left Hand - K23-462-00
Average Customer Rating: 4.9 out of 5 stars (34 Customer Reviews)
10" x 2-1/4" Driver's-side electric trailer brake assembly fits 4,400-lb axles manufactured after May 2009. Mounting flange has a 4-bolt pattern. Fits 13" to 15" wheels.by: Ervin A.02/25/2023
Received my order and realized I had ordered the wrong brakes for my trailer a toy hauler.
Made a call to the number listed and Tammy p. Helped me order the correct units.
Gave me the shipping voucher and sent the wrong units back via UPS.
within two days I had the replacements in hand ready to start installation.
Outstanding service and quality parts gave me a feeling of satisfaction and confidence.
I would highly recommend this company and product do to the outstanding service and professionalism.
Tammy should get a raise.
by: John 04/01/2024
The brake part is still working as expected.Thanks for the great service!
by: Robert 06/07/2023
This is not my first purchase with etrailer. They've always had what I needed for my rv. These brake assemblies are very specific to Dexter axles and I could not find them in the Houston area. Dealers either did not stock them or had them in their system. Etrailer was the only place that I found them that I trusted. If you order from them I suggest call as I have always done. Even though I order online every where else the representatives are very knowledgeable about their products and phone orders take priority over online. Thank Korren for your help in making sure I had the right product and shipping them so quickly.
by: Erik09/17/2018
Fit 4,400 Dexter axle. Had to loosen brake shoes manually to get hubs to slide back on. Pretty easy install.
by: Michael 06/02/2023
OEM factory replacement for 4400 lb Dexter axle. Easy install and perfect fit.
by: Wayne 09/09/2023
Great customer service, knowledgeable folks and very fast delivery
Thanks
by: Jim 04/15/2023
Friendly and supportive staff with prompt service
by: Mark 07/22/2022
only dealer that could get me the correct trailer brake parts. Don't mess with others, as you will be sorry.
by: Gary10/13/2018
The brake part shipped was the correct part as ordered and met all my needs for a perfect installation. Including a great staff that answer all questions in a professional manner. Highly recommend Etrailer to all those who desire competent service and quality parts. Thank you very much, Gary
by: Mark02/27/2021
Roger was able to answer all of my questions and was very helpful with the ordering process! My parts were delivered early and came exactly as ordered. I am very pleased with etrailer and definitely recommend them. I will now use them for future parts that I need. Thanks etrailer for helping me get my camper up and running quickly!!
by: Dave 01/20/2020
etrailer is a great source for hard-to-find parts! Staff is knowledgeable and helpful.
by: Ed04/27/2022
On two occasions, I ordered the wrong part #s. Lori, in customer service was very accommodating and got my order squared away, quickly and friendly, both times. :-)
by: Eric08/22/2020
Etrailer was great! Very knowledgeable and helpful. Fast shipping!
by: John 09/22/2021
This was my 1st order from Etrailer! Excellent everything!
1.delivery
2.quality
3.correct part
4.website layout
6 stars!!!!
by: John 11/28/2022
Higher price then others. But good prod uct.
by: Steve12/13/2018
Received my package today before lunch and want to thank you for the excellent service etrailer does . Thank You
by: Michael11/22/2017
Hard to find part. They had it in stock and very quick shipping.
by: Adam 01/21/2022
Part worked perfectly! Customer service was exceptional, James went above and beyond through both transactions! Really appreciate the help.
by: Ray02/22/2022
As always A+ Service
by: Anthony 09/29/2021
I received my parts in 2 days. Wil install them tomorrow
by: Johnston RV05/19/2022
Fast shipping and great product.
by: Sandra 05/10/2024
by: Akrus11/22/2022
by: Andy 09/11/2022
by: Darlene 12/05/2023
25
34
Show More Reviews
See what our Experts say about this Dexter Accessories and Parts
- Can Self-Adjusting Brake Shoes Be Used On Manual-Adjusting Dexter Brake Assembly?I do not recommend using the self adjusting brake pads for your manual adjust brake assembly as they are not designed to be used together. If you want the self adjusting setup then you will want to go with Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Left Hand - 4,400 lbs # K23-478-00 and Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 4,400 lbs # K23-479-00. If you want to keep you current Dexter Electric Brake Assembly 10" - Right Hand # K23-463-00...
view full answer... - What Are the Torque Spec for Brake Mounting Hardware on Dexter 10" Electric BrakesAccording to Dexter, 10" Electric Brake Assemblies like the # K23-462-00 and # K23-463-00 should be secured to the axle with brake mounting hardware like the # BRKH10B. The # BRKH10B should be tightened to between 45-ft/lbs and 70-ft/lbs.
view full answer... - Fit of K23-462-00 Brake Assembly on Al-KO 4400 lb AxleIf the inside diameter of the existing hub is 10 x 2-1/4 inches and the brake mounting flange has the bolt hole spacing as shown in the provided photo, the # K23-462-00 brake assembly you'd referenced would work for you. The brake assemblies include the mounting hardware and the mud and crud plugs to cover the holes for the brake adjuster.
view full answer...
- Nev-R-Adjust Dexter 10 by 2-1/4 inch 4.4k Brake Assembly RecommendationsWe have exactly what you need. The part # K23-478-00 is a left hand Dexter 4.4k Nev-R-Adjust brake assembly that is 10 by 2-1/4 inches. For the right hand side you would need the part # K23-479-00.
view full answer... - Do Dexter Electric Brakes K23-462-00 & K23-463-00 Fit 4,000 lb AxlesThe title of these Dexter electric brakes does read for a 4,400 lb axle, but they will fit - and work - with the 10" drum on a 4,000 lb axle like yours. Since your axle was made in 2016, you do have the correct Dexter brakes: - Dexter Electric Brake Assembly for 4.4K Axles Manufactured After May 2009 - 10" - Left Hand # K23-462-00 - Dexter Electric Brake Assembly for 4.4K Axles Manufactured After May 2009 - 10" - Right Hand # K23-463-00 My guess is the fact Dexter lists these as for...
view full answer... - Brake Assembly Recommendation for 4,400 lb LCI Axles Made in 2012For a 4,400 lb brake assembly for your Lippert axles you'd want the part # K23-463-00 which is confirmed as a fit and since your axle was made after 2009 it would be the correct fit. This is the right hand side. For the left hand side you'd want the part # K23-462-00.
view full answer... - Is The Bushing For Actuating Lever On Dexter Brake Kit # K23-462-463-00 Available Separately? I do not see that Dexter offers the bushing separately for the Dexter Brake Kit # K23-462-463-00. We do have the Left # K23-462-00 and Right # K23-463-00 assemblies separately so you do not have to get both assemblies.
view full answer... - Cushioned Equalizer Fit for 2015 Prime Time Lacrosse 318BHSLooks like you have a longer equalizer setup on your 2015 Prime Time Lacrosse 318BHS but I would need the length of the equalizer to ensure we get you the correct replacement. We do have the Equa-Flex Cushioned Equalizers # LC314336 which appears to be what you are in need of. It measures 14-5/8 inches from the side holes and then 3-1/4 inches vertically so you'd need to measure yours to compare. This is a cushioned equalizer setup that will smooth out the ride quality of the trailer.
view full answer... - Replacement Trailer brakes for a River Wildwood 30KQBSSIt sounds like your 2018 Forest River Wildwood 30KQBSS Travel Trailer has a bad brake assembly. Since you are still having issues with the trailer disconnected we can rule out a ground or wiring issues. We have both a left and right hand assembly available depending on which side of your trailer you're having problems with. For the Left Hand side you will want the Dexter Electric Brake Assembly for 4.4K Axles item # K23-462-00. For the Right Hand side you will want the Dexter Electric...
view full answer... - Trailer Brake Controller Not Putting Out Voltage With Brake Pedal When Vehicle is StationaryIt sounds as if you have a proportional-style brake controller. A proportional controller will only output power to the brake magnets if the vehicle is in motion. When the vehicle is stationary, you can test the trailer brakes by using the manual brake switch on your brake controller. If you have a time-delayed type controller, voltage should be output to the trailer brakes when the tow vehicle brakes are applied. If it doesn't, you'll want to check the CHMSL (third brake lamp) fuse in...
view full answer... - Replacement Electric Brakes for a 2007 Jayco Jay Feather EXP w/Dexter Manual Adjust & EZ Lube AxleTypically to determine the correct size of brakes on your 2007 Jayco Feather EXP you have to pull off the wheel and the hub and drum assembly and measure according to the attached diagram. You will also want to know the capacity of your axle, this will be listed on a placard on the axle itself. While under the trailer you also may be able to look at the back of the brake assembly for the make and model number stamped into it. With that information, I may be able to determine what brakes...
view full answer... - Does My Trailer Use Replacement Brake Assembly K23-462-00 or 23-454?I would be happy to help! Since your brake assembly is stamped K23-462-00 you will want to go with the Dexter Electric Brake Assembly for 4.4K Axles # K23-462-00 and you can confirm that this is the correct assembly and not just an incorrect sticker by measuring the 4 bolt pattern of the brake assembly. This brake assembly has a 4 bolt pattern that measures 2-7/8" between the center of the upper bolts, 3-1/4" between the centers of the lower two bolts, and 3" between the upper and lower...
view full answer...
- How Long Does It Take New Trailer Brakes to EngageYes it is normal for new brakes so it is not something that you should worry about because you probably just haven't traveled far enough yet with your trailer. Electric brakes need about a 200 mile breaking in period to allow the brake shoes and brake magnets to bed into your drum. During those 200 miles you need to make sure you apply the brakes with a marked decrease in speed at least a couple dozen times and making sure you let the brakes cool between applications. After that you should...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Installed by:
Jeff D
Installed by:
David F
Video by:
Dustin K
Written by:
Wilson B
Updated by:
Alexander C
Updated by:
Matthew E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Ervin A.
2/26/2024
As advertised the quality is there the performance is awesome could not be more satisfied.