Go Power Solar Cable Entry Plate with Red and Black MC4 Cables - 25' Long
(14 reviews)
Price: $63.99
In Stock
Go Power Solar Cable Entry Plate with Red and Black MC4 Cables - 25' Long
Item # 34273843REVA
Retail:$80.00
Our Price: $63.99
You Save: 20%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (14)
- Q & A (0)
- Photos
Go Power Accessories and Parts - 34273843REVA
- RV Solar Panels
- Cables and Connectors
- Cable Entry Plate
- Go Power
Simplify the wiring process for your RV solar panels by creating a strong, simple connection anywhere on your rig. Durable, protective housing with quick-connects for solar cables. Pre-installed, 25' MC4 cables splice to your internal wiring.
Features:
- Cable entry plate provides a covered housing to run solar cables into your RV
- MC4 connectors provide a quick connect setup for external solar cables
- Pre-installed 25' MC4 cables connect to your RV's internal equipment
- Mountable plate prevents leaks by covering and sealing cable entry area
- Reduces the amount of exposed cables
- Strong polycarbonate construction is UV-resistant and impact-absorbent
Specs:
- Dimensions: 6-3/4" long x 3-3/4" wide x 1-9/16" deep
- Wire gauge: #10 AWG
- Cable length: 25' each
- 5-Year warranty
If your RV does not have a refrigerator vent or you need another entry option for your solar cables, the Go Power cable entry plate is a perfect solution. The plate makes it easier to connect your cables with pre-installed MC4 connectors and lets you choose a convenient entry point on your RV. Additionally, the covered housing helps protect your wiring while preventing leaks by covering and sealing the install area.
Plate Features
The MC4 connectors provide a quick way to attach the solar cables on the outside of your rig to your internal wiring. Inside the plate, the jam-nut is thread-locked to resist vibrations and protect the connections during travel. Additionally, the plate has channels on its underside that guide adhesive sealant during the mounting process to ensure a proper waterproof seal.
How It Installs
This cable entry plate comes pre-wired with 25' of MC4 cables for your internal RV connections. Typically, these will connect to your solar controller. Use 10 AWG to 6 AWG wire for additional internal wiring. The ideal location of the plate, as well as your solar panels and solar controller, is near the battery compartment. The total cable length should not exceed 25 feet. Using a drill, install the cable entry plate to your RV roof using 6 pan-head (#10 or #12, not included) screws.
Use a sealant that suits the material of your RV's exterior. If you have to attach the plate's cables to your internal wiring, you need compatible, heat shrinkable butt splices (10 AWG to 6 AWG wiring). Finally, as an additional safety measure, connect a 30-amp in-line fuse (not included) to the positive wire near the battery.
GP-CEP Go Power! Cable Entry Plate w Red and Black MC4 Cables - 25' Long - GP-CEP-25
Replaces Go Power 73843REVA and 73843
Installation Details
Alternate Instructions
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Did not arrive in time
- Did not fit
- Wrong item was ordered
Customer Reviews
Go Power Solar Cable Entry Plate with Red and Black MC4 Cables - 25' Long - 34273843REVA
Average Customer Rating: 4.7 out of 5 stars (14 Customer Reviews)
Simplify the wiring process for your RV solar panels by creating a strong, simple connection anywhere on your rig. Durable, protective housing with quick-connects for solar cables. Pre-installed, 25' MC4 cables splice to your internal wiring.by: Richard04/20/2022
I have a small Go Power solar charging system for my boat. This item allows for permanent installation. I’ll submit a picture when it’s finished. Great website but wasn’t aware solar products were in the inventory. Shipping and communications couldn’t have been better. I’ll be back!
by: Damien 04/19/2024
On Time and what I ordered
by: Tom S.05/07/2019
I am installing a solar system for a cargo trailer. This item was perfect and easy to install the wires thru the roof and provide a water proof fixture. The cover protects the hole made for the wires to pass thru and with the sealant kit provides a great seal.
The entire system was easy to install and the instructions were very good.
by: Joe V05/30/2023
Excellent service
by: Dan 09/02/2022
Worked perfect!
by: Brian 08/22/2021
Fast, quality,great price, great customer service.
Short and sweat
Brian
by: Chris03/10/2022
Part was received very quickly. Thank y ou
by: Scott 08/30/2022
by: Rex01/21/2021
by: Ryan05/15/2023
by: Victor 01/21/2023
by: Hannah 02/01/2023
by: David 08/12/2021
by: Dave 08/21/2021
14
14
See what our Experts say about this Go Power Accessories and Parts
- Using Other Solar Panels to Create Go Power Solar Extreme Charging KitTo create the Go Power Solar Extreme Charging System # 34282552 without the solar panels would take quite a bit of piecing together. But at it's core would be the Go Power Pure Sine Wave Inverter # 34279953, the remote controller # 34277742, the install kit # 342GPDCKIT4, and the solal power controller # 34276119, the # 2 of the part # 34267040, 2 of the # 34267049, and # 34273843REVA.
view full answer... - Replacement Nut Parts for Connecting MC4 CablesFrom what you are describing it sounds like you are talking about either the nuts on the entry plate or the connectors on the cables. We have the Go Power Solar Cable Entry Plate for MC4 Cables # 34273840 for the entry plate and the Redarc MC4 Connector Kit for Solar Panels # RED98VR (contains 1 male and 1 female) for the connectors that are on the cables that connect to the plate. We also have some kits like the Go Power Solar Cable Entry Plate with Red and Black MC4 Cables # 34276245...
view full answer... - Parts Needed to Control Battery Charge with Go Power Eco Solar Charging SystemIn addition to the Go Power Eco Solar Charging System - 10 Watt Solar Panel # 34273836 you'll at least need the Go Power PWM Solar Charge Controller # 34280503 and then I recommend using an entry plate like the part # 34273841REVA to make the installation look nice as the controller will need to be on the inside of your trailer/vehicle. The entry plate I mentioned has a 10" wiring extension but if you need something longer is also comes in the following lengths: 7' - # 34276245 25' -...
view full answer... - Is The Go Power 570 Watt Solar Extreme Charging System Available With a MPPT Charge Controller?Since Go Power does not offer a Solar Extreme Charging System like # 34282185 with a 30amp MPPT Controller # GP72RR you would need to get all the components separately and build your own system. Here is a list of the parts needed. Go Power Overlander Expansion Kit # 34282182 Qty- 3 30AMP Go Power MPPT Solar Charge Controller # GP72RR Bluetooth Remote Display for Go Power MPPT Solar Charge Controllers # GP37MR 3,000 Watt Go Power Industrial Pure Sine Wave Inverter Charger # 34275013 Go...
view full answer... - Hardware, Wiring, and Entry Plate Needed for 190W Go Power Solar PanelsEach 190 Watt Go Power Overlander Expansion Kit # 34282182 comes with the following connectors and hardware which you can pick up here if you're needing a replacement: Mounting Hardware - # 34272708 MC4 Expansion Branch 1 Male and 2 Female - # 34267049 MC4 Expansion Branch 2 Male and 1 Female - # 34267040 There should also be enough wiring included with each solar panel to link them together although we do have replacements like the 3' Cord # 34274672 or 10' Cord # 34276216. If you're...
view full answer... - Can Larger Gauge Wire be Used from the Go Power Solar Cable Entry Plate to the ControllerYou could use larger MC4 cable gauge wire from the Go Power Solar Cable Entry Plate # 34273840 to your controller but it wouldn't benefit you very much unless you used larger gauge wire from the solar panel to the entry plate. Larger gauge wire just ensures that enough power is getting from the power source to the part that needs powering but if the initial gauge wire is 10 then going larger further back wouldn't do anything for you. I recommend using one of the entry plates that comes...
view full answer... - Are The Red And Black MC4 Cables Made With Marine Grade Tinned CopperYes, I reached out to my contact at Go Power and they stated the red and black cables of the Go Power Solar Cable Entry Plate with Red and Black MC4 Cables - 25' Long # 34273843REVA are marine grade.
view full answer... - Solar Power System Recommendations For A Food Truck For what you're trying to do I recommend the Go Power Solar Extreme Charging System - 570 Watt Solar Panels - 3,000 Watt Inverter Charger Item # 34282185. This solar charging system has the ability to invert AC shore power to DC power as well for rainy days. The three panels on this each measure 59-1/8" long x 26-5/16" wide x 1-1/2" deep so if you can't place them all next to each other we offer extension cables with an entry plate for installing the cable through the roof of your truck...
view full answer... - Recommended Solar Panel For Battery Maintaining While RV Is In StorageWe don't currently offer extensions compatible with the OptiMate Solar Duo Portable Solar Panel with Controller - 10 Watt Solar Panel # MA69JR. For the panel to charge both batteries they would just need to be wired in parallel. To make your life easier I recommend going with the Go Power Eco Solar Charging System with Digital Solar Controller - 20 Watt Solar Panel # 34273837. This solar panel comes with 25' long connectors and has multiple sizes of extensions. This panel doesn't come...
view full answer... - Why are Go Power Solar Cable Entry Plates Priced DifferentlyWe have a few different options for the Go Power Solar Cable Entry Plates like the part # 34273841REVA that you referenced. The only real difference is the length of the cable that it comes with. The one you referenced comes with 10 feet of cable whereas we have options like the # 34273843REVA which come with 25 feet of cable. I attached a link to this page that has all of the options we carry.
view full answer... - What Size Wire Should Be Used With the Go Power Solar Entry Cable Plate?I wouldn't go larger than 10 AWG with the Go Power Solar Cable Entry Plate for MC4 Cables # 34273840. The larger wire will just make sure that you are getting enough power to your entry plate from the solar panel. I recommend going with an option that already has the power wires hooked up like # 34276245 for 7', # 34273841REVA for 10', or # 34273843REVA for 25'.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Jeff D
Updated by:
Wilson B
Updated by:
Alex H
Updated by:
Cody B
Edited by:
Amanda M
Written by:
Halie H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Richard
4/20/2023
System working out great, no complaints!