Summer Starts Here - Save up to 70%
12" x 2" Passenger's-side hydraulic trailer brake assembly features a single-plunger design. Mounting flange has 5-bolt pattern. Fits 14-1/2" to 16" wheels.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Dexter 12-inch right hand passenger side uni-servo hydraulic drum brake assembly for 5,200 pound axles. Now the hydraulic drum brake assemblies are designed to be used with a surge type trailer brake actuator. These happen to be the uni-servo, which is a single plunger design. And these are manual adjustment brakes, so they do require period manual adjustment. You just adjust them down here where the adjustment gear is. Now, this one is a right-hand, passenger side brake assembly. Comes with the mounting lock washer nuts to install it.
And you can see there's no bolts on here. On a 12 inch size brake assembly, the brake mounting flange has the bolts on it. So, you just use these nuts to tighten this on to the brake mounting flange. Also, if you notice on the backing plate, it does come with an adjuster plug right here, that covers that access hole. That access hole's what you put your tool through to adjust your brakes with. When you're done adjusting, you can put your adjuster plug back in there.
What's nice about that is it covers that hole, keeps any dirt or grime from getting into your brake assembly, and off your brake shoes. A few specs on this, the size is a 12 inch by two inch brake assembly. And when they say 12 inch by two inch, the 12 inch is the diameter from this shoe to this shoe. If you put a ruler on it, there's your 12 inch. The two inch is the width of the pad on the brake shoe.
There's your two inch wide. And again, this goes, fits a brake mounting flange bolt pattern of five bolts. This does require the use of 12 inch brake drums. And it does use a wheel size of 14-1/2, 15 inch, and 16 inch. And again, it's designed for axles rated up to 5,200 pounds. And the last thing I want to mention to you is how to tell if it's a right hand or left hand side assembly.
This one's a right hand, and of course, on a new one, it'll have a sticker, which is that's easy enough. But if the sticker wasn't there, the easiest thing to do is look at the length of the pad on the brake shoe. This pad goes from here to here. This one goes from here to here. This is a shorter pad, this is a longer pad. Shorter pad is you primary shoe, faces the front of the trailer, so that will tell you that this is a right hand passenger side assembly. But that should do it for the review on the Dexter 12 inch right hand passenger side uni-servo hydraulic drum brake assembly for 5,200 pound axle.
Average Customer Rating: 5.0 out of 5 stars (2 Customer Reviews)
12" x 2" Passenger's-side hydraulic trailer brake assembly features a single-plunger design. Mounting flange has 5-bolt pattern. Fits 14-1/2" to 16" wheels.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.