In-stock alternatives that can ship today
9" Wide x 64-1/2" long x 15" tall. Get 2 extra-sturdy fenders for your tandem-axle trailer with this bolt-together fender kit. 16-Gauge steel is durable. Bolt or weld onto your trailer.
Features:
Specs:
Note: Do not use the connecting plates to mount these fenders to your trailer.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Jeff: Hello everybody. This is Jeff at etrailer.com. Today we're going to take a look at the etrailer, Tandem Axle Bolt Together steel trailer fenders for 14 inch to 15 inch wheels. And it is for a quantity of two fenders. Now these rounded fenders will cover two tires on each side of your tandem-axle trailer. The fender itself will act as an nice splash guard to help keep road debrief from hitting other vehicles.
And it helps to protect your trailers cargo.I wanted to zoom in on them just to describe these are a bolt together design. And when I say that, it means each fender will come as two half fenders, a connecting plate, and then the hardware. It is designed to save shipping costs because of the smaller un-assembled size, when compared to a single piece fender of this size. It will also offer extra strength to the fender because of the way this is assembled. If you can see here underneath there's your connecting plate, that connects the two together, then you can see the grade five hardware that they use.
So when you put this all together, gives it a lot more strength also for the fender.Now the inner and outer edges on this, you can see both edges, both inner and outer edges. They have a nice one inch curve radius slip for extra protection and a nice top quality appearance. And the material is a sturdy 16 gauge cold rolled steel construction. Now it is a raw finish, so because of that you might see some surface rust spots on it, but you just sand those lightly to remove them. And then it needs to be primed and then painted to provide even more resistance to corrosion and to even match your trailer's paint finish.These are a weld on or bolt on installation.
They are not pre-drilled. And the mounting brackets for both on installation, we do sell separately on our website. These fenders are made in the USA. Application again is for tandem-axle trailers with 14 inch to 15 inch diameter wheels. This is for a quantity of two fenders.
The weight on these, each fender is about 13 pounds each. And the dimensions on the fenders, if we measured the length from that end all the way to that end, is going to be 64 and a half inches long. Width on them is nine inches. And the heights from the bottom to the very top is going to be right at 15 inches tall. But that should do it for the review on the etrailer Tandem Axle Bolt Together steel trailer fenders for 14 inch to 15 inch wheels for a quantity of two..
Average Customer Rating: 4.6 out of 5 stars (873 Customer Reviews)
9" Wide x 64-1/2" long x 15" tall. Get 2 extra-sturdy fenders for your tandem-axle trailer with this bolt-together fender kit. 16-Gauge steel is durable. Bolt or weld onto your trailer.
Had to replace boat trailer fenders and ordered from etrailer. Shipment was amazing and quick. The fenders were a little longer than we needed, but my husband made them fit. The outcome is great!
These fenders were a replacement on a Skeeter boat trailer. These fenders are a much better quality than the original fenders and I am very happy with them. Highly recommended.
Husband modified his boat trailer from a single axle to tandem and then needed new fenders of course and these were perfect. Very pleased with them and etrailer.com was great to work with from initial purchase to delivery. Thanks!!
Your fenders arrived yesterday. They look fine. It would have been nice if the person I dealt with on the phone had mentioned the panels that close off the back of the fender. I noticed the panels on your web site while checking to see the status of the fenders that were supposed to be delivered on March 30 but didn't arrive until the 31st. Not a problem, since I now have to wait for the second order of the backing panels. Not totally the salesperson's fault as I should have noticed the lack of backing on the website photo. Always been good dealing with you folks so no problem.
I absolutely hate to leave this store a bad review because I've had nothing but good experiences with them in the past. However I'm extremely disappointed. I Purchased these replacement fenders through etrailer after shopping around and even though they were cheaper elsewhere I opted to do my business with etrailer and pay a little more knowing how impressed I've been in the past with the level of pride they take in shipping items, I've gotten boxes inside of boxes in the past. Unfortunately this time I recieved $xxx worth of dented up fenders for my trailer. They were only wrapped in stretch wrap, not even bubble wrap much less a box. Very disappointed in etrailer after this purchase. You guys can do better, I've seen you do better, with the rims and tires I bought there for this same trailer.
They do not work for 15 inch wheels . My trailer had no fenders so I had nothing to compare them to. I bought some 14 ga. Material and made them 4 inches longer. I radiused the sides with a snap on impact deep socket. Mig welded them up and will sand down tomorrow . They fit great now. Thank you.
Metal was thick enough to weld safely to the trailer frame and thicker angle iron. I did a crappy spray can paint job(just brake cleaned them before painting) and they are still looking great a year later.
They sent me two of the same side fenders I believe two left fenders, I would have returned them and gotten a the correct one sent but I didn't realize until to late. We had gotten someone to come out and weld them on and he is the one who figured out they sent two of the same sides. Because he drove two hours to come weld them on for us and we needed them put on asap, we had to just weld them on anyways. Although they aren't even our welder did a great job at making them look the best he could. Wish the correct ones were sent so that they would have been perfect but it's just a bit of a bummer. The fenders them self are great looking good quality and sturdy it was just who ever packed it unfortunately made an error. I purchased a lot more things from this buisness and all are great other then this error
The fenders are good quality although had to modify them to fit my trailer. My issue is how they were shipped. no protection aside from a plastic film on them and shipped both fenders in one box so they came with some scratches which was pretty disappointing. I reached out to ETRAILER but no one ever responded. if they'd take a moment to pack them to protect them during shipment I'd have given 5 stars. Although exact same size as my original fenders, I had to use ratchet straps and a floor jack to get them in position and drill new mounting holes. In the end, aside from some scratches during shipping they look great and have had no issues. I'd probably buy them again but would call and ask if they'd protect them instead of just throwing them in a box.
My trailer had a few tire blowouts that destroyed the plastic fenders. After ordering steel fenders and brackets from etrailer, my trailer looks brand new! The delivery and products are flawless!
Fenders were as advertised at a good price point. They replaced ones that had been on the trailer for 20 years. I'm certain these will last just as long.
Fenders look good had to trim a little off both ends of backing plates. Yes I will buy from them again.
Very good quality. I would recommend to anyone looking for trailer parts. Great service at a reasonable price.
Good quality . arrived undamaged.i welded
Metal condiut at a angle in the middle and all under the outer edge so it would be extra strong in case i have to stand on it.
Useed on Car trailer
Fenders started to have surface rust all over them even though they are supposed to be stainless steel after only 3-weeks. I do not recommend these for salt water application.
Great quality. Good fit. Been installed for a year and stainless is holding up great
The fenders were a great replacement for the old fiberglass fenders.....they fit perfect....great upgrade and best price that included shipping.....thanks
The fenders worked great I put them on a 2007 Champion boat trailer they fit pretty good. That being said the way that they are prepped for shipping is not good..they are staked together with nothing between the two fenders so the bottom one gets scratched up. There is very little protection for the fenders during shipping so the top one was scratched up also.I put them on anyways it was not worth the trouble of trying to send them back.
Original destroyed by a tire failure. Arrived quickly and well packed (wrapped). However I did not realize they were bare metal. No problem for a rattle can. How to video was very helpful. Complete install, minus paint, took about four hours. A second set of hands would be very helpful!
The fenders worked great! Easy install. Made the trailer look new again
These fenders are absolutely awesome on my boat! Seem well made and sturdy. The only complaint I have is the same as others.I feel they could shipped with better packaging, I have 3 scuffs from shipping
I was hesitant to order fenders online but I took a chance and I am very pleased. They are quickly and with absolutely NO TROUBLE !! I highly ,and have recommended this company.
Do you have a question about this Trailer Fender?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.