Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System
(14 reviews)
Price: $165.95
In Stock
Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System
Item # BWMC2302B
Our Price: $165.95
In Stock
Need help with installation?
Locate installers near me- All Info
- Reviews (14)
- Q & A (0)
- Videos (1)
- Photos
B and W Accessories and Parts - BWMC2302B
- Motorcycle Tie Down Straps
- Tie Down Anchors
- Motorcycle Anchor Parts
- Bars
- B and W
Replaces the bar for your B&W biker bar motorcycle tie-down system (BWMC2302). Base and anchor plates (BWMC2300) are sold separately.
Features:
- Replaces the bar for your B&W biker bar motorcycle tie-down system (BWMC2302)
- Base and anchor plates (BWMC2300) are sold separately
- Quantity: 1 bar
MC2302B Replacement Bar for B and W Biker Bar Motorcycle Tie Down System
California residents: click here
Video of Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of B and W Replacement Motorcycle Tie-Down Bar - BWMC2302B
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this B&W Replacement Bar. This is going to replace the bar for your B&W Bike Bar Motorcycle Tie-Down System. This will be an exact replacement from B&W so if you are needing to replace that original bar this is going to be the exact replacement so you can trust it's gonna fit right in place of that original. It's gonna do a great job for you making sure that your bike is secured down and forward to the rest of your system. So that completes our look for today.
Again, I'm Michael with etrailer.com. Thanks for watching..
Customer Satisfaction Score:
89% were satisfied with this product
11% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System - BWMC2302B
Average Customer Rating: 4.9 out of 5 stars (14 Customer Reviews)
Replaces the bar for your B&W biker bar motorcycle tie-down system (BWMC2302). Base and anchor plates (BWMC2300) are sold separately.by: Joel 08/12/2023
Love the B & W biker bar
by: Glenn06/16/2022
The Biker Bar worked great on my wife's 1995 Road King but didn't fit my 2014 Tri Glide Ultra Classic. The bar locks was too high and there was no way to lower it enough for the trike to clear. We'll keep the Biker Bar for the 95 Road King and use more conventional tie downs for the trike.
by: Eddie01/30/2023
Fits great,fast shipping, good tracking information.
e trailer provided good customer service and communication
by: Laura M02/22/2020
I don’t know how to update my previous review… What outstanding customer service! My biker bar was bent and even after a year they sent me a replacement absolutely free! This is the easiest way to secure a bike when you’re alone! I love this so much I bought two ... this is well worth the money. Plus with the great customer service it's a no brainer.
by: Timothy 10/08/2021
Perfect condition. Shipped very quickly. So glad these were available without having to buy the whole biker bar kit.
by: John 08/07/2021
Super fast service! Shipped the same da y!
by: Scott 11/14/2020
Great Product with quick delivery.
by: William 12/09/2019
great
by: Mario 10/03/2022
by: David 10/03/2022
by: Mark 09/21/2021
by: Kedrick05/17/2023
by: Will 11/01/2021
by: Mary 11/13/2021
14
14
See what our Experts say about this B and W Accessories and Parts
- Replacement Biker Bar Frame Bar for 1998 Harley Davidson Fat Boy The B&W Biker Bar Motorcycle Tie-Down System for Touring Harleys, part # BWMC2301, will not fit a Fat Boy frame but all you need is part # BWMC2302B fitted to the FB to be able to secure it to the base of your Touring model.
view full answer... - B&W Biker Bar Tie Down System Compatibility Of Touring And Softail Clamping BarsYou will have to measure the frame diameter on your Softail to determine if you will still be able to use the Clamping Bar # BWMC2301B from your B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Touring # BWMC2301 will fit. The Clamping Bar # BWMC2301B is designed to fit a 1.125” - 1.25” tube frame diameter with 10”-14.5” frame width. While the Clamping Bar # BWMC2302B for soft tails 1.25” - 1.375” tube frame diameter with 10”-14.5” frame width. So if your Softail...
view full answer... - Will The B&W Biker Bar Motorcycle Tie-Down System Work For A 2016 Harley Davidson Fat BoyThat will depend on which model B&W Biker Bar Motorcycle Tie-Down System you have installed on the trailer. The # BWMC2301 will only work with touring bikes and the 2016 Fat Boy would be considered a softail and needs the # BWMC2302. You can purchase just the bar # BWMC2302B and it will work with the mount that is already on your trailer per B&W. The bracket is the same on all of the Biker Bars.
view full answer... - What Is The Difference In The B&W Biker Bars The Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System # BWMC2302B fits the frame diameter of 1.250" to 1.375" and width 10" to 14.5" softail bikes. The B&W Biker Bar Motorcycle Tie-Down System for Trailers # BWMC2301 fits the frame diameter 1.125" to 1.250" and width 10" to 14.5" of touring bikes. While the bars appear similar they are designed to fit different bike dimensions.
view full answer... - Will B&W Biker Bar from a 2010 Ultra Classic Fit a 2014 Softail DeluxeThe B&W Biker Bar that you should be using for your 2010 Ultra Classic is the part # BWMC2301 but for your 2014 Softail Deluxe you need the Biker Bar # BWMC2302 instead. Good news is that both options use the same base system so you just need to replace the actual bar instead of the entire kit and for that you need the Replacement Bar # BWMC2302B. This then gives you the entire setup for your Softail Deluxe.
view full answer... - Troubleshooting Rubber Pads Of B&W Biker Bar Coming Unglued From Metal BarWith the pads coming unglued on your Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System # BWMC2302B, I recommend using the Loctite QuickTite Super Glue Gel - Instant Adhesive - 0.14-Oz Applicator # LT39123. This adhesive is designed for metal and rubber use, so it will work well and is designed to tolerate stresses like shock, vibration, and impact.
view full answer... - Replacement Rubber Pads For B&W Biker Bar Motorcycle Tie-Down System Hi Bill, The rubber pads on the Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System # BWMC2302B aren't currently offered separately so you would need to either reach out to B&W directly or you could pick up some rubber from a local hardware store and cut it to size and use an adhesive like Loctite's # LT39123, which can bond rubber to metal.
view full answer... - What Is the Difference Between Biker Bar # BWMC2302B and # BWMC2301B?The Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System # BWMC2302B is the replacement bar that fits H-D Dyna, Softail, and V-Rod bike frames. The # BWMC2301B is the Replacement Clamping Bar for B&W Biker Bar Motorcycle Tie-Down for Harley-Davidson Touring frames. The only difference is the bike frames that are compatible.
view full answer... - Biker Bar For The B&W Motorcycle Tie-Down System for TrailersThe B&W Biker Bar Motorcycle Tie-Down System # BWMC2300, just includes the base and anchor plates. That biker bar that attaches to the bikes is item # BWMC2302B. We also have a biker bar that fits Harley-Davidson Touring style motorcycles # BWMC2301B. For the complete system that has the biker bar, base and anchor plates, I recommend B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Softail, Dyna, V-Rod Item # BWMC2302. The Biker Bar System for Harley-Davidson...
view full answer... - Will the B&W Biker Bar Motorcycle Tie-Down System Fit 2007 Yamaha Vmax CruiserB&W has not actually test-fit their Biker Bar motorcycle transport systems like # BWMC2300 on brands other than Harley-Davison but my B&W contact advised that one of the versions may work so long as your frame width and frame tubing diameter are compatible. If you can tell me the outside width of the frame and the outside diameter of the two frame tubes I will be glad to check with a B&W technician to see if they can confirm a compatible fit. I noted that photos of your bike show the...
view full answer... - How to Identify B&W Biker Bar BWMC2301 and BWMC2302You can tell the difference between the B&W Touring Biker Bar # BWMC2301 and Softail # BWMC2302 by looking at the neoprene pads. The # BWMC2302 has gray pads and the # BWMC2301 has black pads. It is a darker gray, and may appear black if it is dirty, so cleaning the pads will help if you aren't able to tell a difference right away. The difference is easier to see if you check the pictures for the Replacement Clamping Bars you were looking at. The # BWMC2301B is black while the # BWMC2302B...
view full answer... - B&W Biker Bar Motorcycle Tie-Down System Parts Needed For a Harley Davidson DynaThe Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System # BWMC2302B is the bar that is designed to fit the Harley Davidson Dyna motorcycle. This will allow you to secure your Dyna to the B&W Biker Bar Motorcycle Tie-Down System Base # BWMC2300 or we have it as a Kit # BWMC2302 if you need both components.
view full answer... - Motorcycle Tie-Down System for 2019 Honda Goldwing TourWe do get asked that a lot. I haven't heard any plans from B&W to make a Biker Bar like # BWMC2301 for your Goldwing. The haven't done the research and development to make the bar for the frame that attaches to the base with anchor plates. You can get the B&W Biker Bar Motorcycle Tie-Down System Base with Anchor Plates # BWMC2300 and then customize a bar like # BWMC2302B for compatibility. As of right now, the Rack'Em Manufacturing Removable Wheel Chock # RA-17 along with tie downs...
view full answer... - B&W Biker Bar For A 1974 Harley Davidson SportsterWith the frame of your 1974 Harley Davidson Sportster being 5-5/12 inches wide you will need the B&W Biker Bar # BWMC2303. This bar will fit on frame tube diameters from 1-1/4 inches to 1-3/8 inches and on frame widths from 4-1/2 to 7 inches. Drilling is required to bolt plate to the trailer floor. If you have any other questions please feel free to reach back out to me anytime and I would be more than happy to further assist you.
view full answer... - Do the B&W Bike Bars All Use the Same BaseActually yes. All of the Biker Bars use the same base, # BWMC2300. The clamping bar for touring bikes is # BWMC2301B and for the Heritage bikes the bar is # BWMC2302B.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
Wilson B
Updated by:
Kristina F
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.