How to Identify B&W Biker Bar BWMC2301 and BWMC2302

Question

Question:

How can I tell the difference between the touring bar and the softail bar? We have both and they look the same. There are no part numbers on the bars that I can see.

asked by: Dave

0

Expert Reply:

You can tell the difference between the B&W Touring Biker Bar # BWMC2301 and Softail # BWMC2302 by looking at the neoprene pads. The # BWMC2302 has gray pads and the # BWMC2301 has black pads.

It is a darker gray, and may appear black if it is dirty, so cleaning the pads will help if you aren't able to tell a difference right away. The difference is easier to see if you check the pictures for the Replacement Clamping Bars you were looking at. The # BWMC2301B is black while the # BWMC2302B is gray.

expert reply by: Robin H

0

Answer 1

The Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System #BWMC2302B is the replacement bar that fits H-D Dyna, Softail, and V-Rod bike frames. The #BWMC2301B is the Replacement Clamping Bar for B&W Biker Bar Motorcycle Tie-Down for…

view full answer...

Answer 2

I checked with B and W to find out how to tell the two Biker Bars you have apart and they told me that the #BWMC2301 has black pads where it grabs the frame and the part #BWMC2302 has gray pads. While she didn't specify what the overall…

view full answer...

Answer 3

The B&W Biker Bar Motorcycle Tie-Down System for Trailers #BWMC2301 and #BWMC2303 will use the same base so will attach to the trailer the exact same way, but it is the actual bar that attaches to the frame of the bike that will be different. The…

view full answer...

Answer 4

The Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System #BWMC2302B is the bar that is designed to fit the Harley Davidson Dyna motorcycle. This will allow you to secure your Dyna to the B&W Biker Bar Motorcycle Tie-Down System Base…

view full answer...

Answer 5

The B&W Biker Bar that you should be using for your 2010 Ultra Classic is the part #BWMC2301 but for your 2014 Softail Deluxe you need the Biker Bar #BWMC2302 instead. Good news is that both options use the same base system so you just need to…

view full answer...

Answer 6

You will have to measure the frame diameter on your Softail to determine if you will still be able to use the Clamping Bar #BWMC2301B from your B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Touring #BWMC2301 will fit.…

view full answer...

Answer 7

The unique B&W Biker Bar Motorcycle Tie-Down Systems like #BWMC2302 do require that the mounting surface be strong enough for the significant weight of a V-Twin, or in your case two. For instance, a trailer with a 1/2-inch plywood deck, as…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

When installing the Roadmaster Split Bushing for Anti-Sway Bar part #RM-205249-10, I recommend using the Mystik JT-6 part #L74FR. This is a marine grease that is very similar to what comes with their sway bars.

view full answer...

Answer 11

Yes, you can hook up a power inverter to input one and then shore power to input two on the Furrion Automatic Transfer Switch part #F30ATS. The dip switch will then need to be in the off position in order for the power to transfer instantly without…

view full answer...

Answer 12

The B&W Patriot slider fifth wheel hitch #BWRVK3270 that you referenced weighs a total of 220 lbs. While that is a lot of weight what's great about the B and W hitches is that they break down into smaller sections easily to help distribute…

view full answer...