Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Secure your bike in your trailer quickly and easily with this clamping tie-down system. No straps or chocks needed. Just mount the clamping bar to your bike, drive over the trailer-mounted plate, and your motorcycle will automatically latch in place.
Features:
Specs:
Note: The Biker Bar is designed to secure a motorcycle that is pointed in the direction of travel only.
With B&W's Biker Bar, it's never been easier to secure your motorcycle for travel. Just bolt the latching plate to the floor of your trailer, and clamp the included bar to your bike's frame. Once both components are appropriately mounted, simply drive your motorcycle onto your trailer, over the latching base plate, and the bar will automatically latch into the base. No straps or wheel chocks are needed.
Not only does this motorcycle tie-down system make it fast and easy to connect your bike to your trailer, but it also makes it safer and more secure. Because there are no tie-down straps, there are no buckles or hooks to rub against your bike, potentially scratching your paint or trim. And because the bar attaches to your motorcycle's frame, this system provides more stability than tie-downs alone. In fact, the Biker Bar system is designed not only to secure your bike, but also to create a natural ride for it during trailering. Once hooked up to the latching plate in your trailer, your motorcycle's suspension is effectively linked with the suspension system of the trailer, eliminating undo stress on your bike.
Installation
Installation of the Biker Bar is simple. The bar itself clamps to the bottom of your bike's tubed frame. Be sure to clear any potential obstacles, such as hydraulic lines or wiring harnesses, that could get caught between the clamps and the frame. The clamps on the bar are lined with neoprene to prevent scratches to your bike's frame.
Once you have the bar securely clamped to the frame of your bike, ride the bike onto the trailer to determine the location where you want the bike to attach. Mark that spot on the floor of your trailer so that you can bolt down the latching plate. You will have to drill into your trailer's floor to attach the plate.
The final setup step is to adjust the height of the latching base. Once the base is bolted to the trailer's floor, ride the bike over it until the bar is directly in front of the base. Measure the distance from the middle of the bar to the trailer's floor. Your bike's suspension must be slightly compressed while latched down to appropriately stabilize the bike during transport. So you must remain sitting on the motorcycle while taking this measurement. Once you have this measurement, remove the bar from the bike and place it in the latching base. Adjust the height of the base until the bar is the same distance from the floor as it was when on the motorcycle. The base adjusts in 1/4" increments, so the height may not be exact. As long as the bar is within 1/4" of your initial measurement, setup is complete.
California residents: click here
Average Customer Rating: 4.9 out of 5 stars (347 Customer Reviews)
Secure your bike in your trailer quickly and easily with this clamping tie-down system. No straps or chocks needed. Just mount the clamping bar to your bike, drive over the trailer-mounted plate, and your motorcycle will automatically latch in place.This will be my third set up!
Absolutely the best way to secure a bike for transport!
25+ long trips with multiple trailers and never an issue!!
Highly recommended!
This was absolutely worth the cost. I have used several times and am very happy with the ease of loading & unloading my Harley Touring Motorcycle.
Most EXCELLENT! Easiest device I have ever used to lock my HD in place in my enclosed trailer. Zero movement, perfectly secure! Easily 5 STARS!!
I haven't mounted the BikeBar yet, but it seems to be top quality! Nice sturdy mount and the powder coating and plating look very nice. These are expensive units so I was hesitant to order, but so far I am definitely pleased with the quality.
Strong built products. The Biker Bar was very easy to install and use. I have a 3000 mile trip planned this month which will cement my opinion. I have a Legend air suspension mounted on the lower frame that is very close to the bar, just hoping no interference. So far so good.
Customer service is some of the best I've worked with.
Love the biker bar, no tie down require. Just drive your bike to the biker bar motorcycle tie down and is secure and believe me when I say your motorcycle is safe and secure.
I love the Biker Bar Tie-Down system. Once I loaded both bikes in my trailer they did not move the whole time traveling giving me a piece of mind. I use a trailer camera to watch my bikes but with this system I didn't really need it.
I love this bar was a good investment
I can’t say enough about this product. I had tried to secure my motorcycle in my 5th wheel trailer with various tie downs and never was able to get it where it was secure after traveling. The tie down would loosen up and I didn’t like the fact that the suspension was compressed. With the biker bar it was so easy to secure the motorcycle and last year I traveled over 10,000 miles and the bike never budged.
This is the greatest product ever made.I am a little heavy on the gas and while driving this rack holds my 2016 roadglide like glue to the floor easy to use and effective.great job guys
Dominic C.
3/29/2018
the best ever still holding up like new
This is an easy install, and well worth the price paid. Much more confident with the way the bike secures. The floor plate and the “bike bar” are easy on, and easy off. The bike loads and off loads are quick and easy as well.
Best investment I’ve made for my motorc ycles
I’m pretty disappointed that it didn’t make it a year. It’s a great idea, but the quality for the hinge just isn’t there. I has scratched my pipes that I just put on my bike.
I ordered the wrong thing and when I realized I did I called them the next day to change the order and they was so great to do so great service
Absolutely love it. Easy to use and I always know my bike isn't going anywhere.
We just got 2 bars installed in the toy hauler and did a test run. Everything appears to be on the up and up and are happy with the product, how it mounts/locks into place, and appears to be a game changer to all the straps and tie downs from the past
Do you have a question about this Motorcycle Tie Down Strap?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Kevin
1/16/2022
Holds securely for miles on end. Very well spent money.