B&W Biker Bar Motorcycle Tie-Down System Parts Needed For a Harley Davidson Dyna

Question

Question:

What replacement bar do I need for a Harly Dyna?

asked by: David M

1

Helpful Expert Reply:

The Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System # BWMC2302B is the bar that is designed to fit the Harley Davidson Dyna motorcycle. This will allow you to secure your Dyna to the B&W Biker Bar Motorcycle Tie-Down System Base # BWMC2300 or we have it as a Kit # BWMC2302 if you need both components.

expert reply by: Bud M

1

Answer 1

I might have an option for you but there isn't a B&W Biker Bar Motorcycle Tie-Down System like part #BWMC2302 designed for Indian's or Kawasaki's. That said, it may still work if you go through the steps below.

view full answer...

Answer 2

I checked with B&W, and they do not list specific fits for Indian bikes, but I can tell you how to determine if your bike 2016 Indian Roadmaster will work with the B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson…

view full answer...

Answer 3

Normally trailer coupler height is around 17 inches, from the ground to the bottom of the coupler, and most hitch manufacturers design their hitches to work with a ball mount that will end up very close to this measurement. I am including a link to…

view full answer...

Answer 4

The 1/2" Trimax Dual Purpose Coupler Lock #TMX77FR measures 4" across to the U-Shaped locking pin. We also have the 9/16" Trimax Dual Purpose Coupler Lock #TMX67FR and Trimax Dual Purpose Coupler Lock with Ballistic Grade Nylon Housing…

view full answer...

Answer 5

The Replacement Bar for B&W Biker Bar Motorcycle Tie-Down System #BWMC2302B is the replacement bar that fits H-D Dyna, Softail, and V-Rod bike frames. The #BWMC2301B is the Replacement Clamping Bar for B&W Biker Bar Motorcycle Tie-Down for…

view full answer...

Answer 6

I checked with B and W to find out how to tell the two Biker Bars you have apart and they told me that the #BWMC2301 has black pads where it grabs the frame and the part #BWMC2302 has gray pads. While she didn't specify what the overall…

view full answer...

Answer 7

You can tell the difference between the B&W Touring Biker Bar #BWMC2301 and Softail #BWMC2302 by looking at the neoprene pads. The #BWMC2302 has gray pads and the #BWMC2301 has black pads. It is a darker gray, and may appear black if it is dirty,…

view full answer...

Answer 8

The B&W Biker Bar Motorcycle Tie-Down System for Trailers #BWMC2301 and #BWMC2303 will use the same base so will attach to the trailer the exact same way, but it is the actual bar that attaches to the frame of the bike that will be different. The…

view full answer...

Answer 9

The B&W Biker Bar that you should be using for your 2010 Ultra Classic is the part #BWMC2301 but for your 2014 Softail Deluxe you need the Biker Bar #BWMC2302 instead. Good news is that both options use the same base system so you just need to…

view full answer...

Answer 10

You will have to measure the frame diameter on your Softail to determine if you will still be able to use the Clamping Bar #BWMC2301B from your B&W Biker Bar Motorcycle Tie-Down System for Trailers - Harley-Davidson Touring #BWMC2301 will fit.…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

B&W Biker Bar Motorcycle Tie-Down System Parts Needed For a Harley Davidson Dyna

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching