Is the Replacement Adhesive Velcro Strip for Access Tonneau Covers Both The Hook and Loop Side?

Question

Question:

What is the width of this strip? It is the hook side?

asked by: Matt

0

Expert Reply:

The Replacement Adhesive Velcro Strip for Access Tonneau Covers - 16' Long x 1-1/4" Wide # A20790 is just the hook side of the Velcro. The loop side of the Velcro is attached to the tonneau cover edges.

expert reply by: Jason S

0

Matt

9/26/2018

What is the width of this strip? It is the hook side?

Reply

Jason S.

9/26/2018

The width of the strip is 1-1/4 inches. This strip is only the hook side with the adhesive on the back. The other side of the Velcro (the hook side) is sewn into the underside of the tonneau cover itself around the edges.

Reply

Answer 1

Good news, I was able to go out to the warehouse and measure this self-adhesive strip. The #B41973 measures 1 inch thick. I have attached an image of the Bestop strip for you to see. I was able to find a better solution for you. The Access…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hi Tyler, When adding in air springs on a lifted vehicle the proper way to determine the correct sized spacer is to first install the upper and lower brackets and then measure the distance between them and subtract the height of the air spring bellow…

view full answer...

Answer 4

Although we do not carry Lund tonneau covers or their replacement parts we do have velcro strips that are 1-1/2" wide in the Replacement Velcro Strip part #A30474. The velcro is 17" long which should be more than enough for your 2009 Toyota…

view full answer...

Answer 5

The Replacement Adhesive Velcro Strip #A20790 is 16' long x 1-1/4" wide, and I believe that's what you were referring to by hook portion, and yes it is correct. We do not carry Lund tonneau covers or their replacement parts so while I…

view full answer...

Answer 6

I have a solution for you, and the strips that you're referring to are going to come in a couple different sizes, but none of them are going to be 1-1/16" wide. The #TX1117876 strips you're referring to are 1" wide, which have the…

view full answer...

Answer 7

For your Karavan trailer I recommend LED tail lights #STL57RB and #STL56RB. They are a little shorter at 6-1/16 inches but they do mount on studs spaced 2 inches apart on center. they are 3-5/8 inches tall and 2-1/4 inches deep overall. I have linked…

view full answer...

Answer 8

Without knowing what brand tonneau cover you have on your 2005 Ford F-250 it is hard for me to say for sure what replacement hook and loop strips you would need. But if you have a Truxedo or an Access check out the links I attached to the right.

view full answer...

Answer 9

Hello, I will be happy to help you select some helper springs to improve the ride and level out the truck when you are towing. Timbren springs are an easy install but they will make the ride stiffer when you are not towing. The similar SumoSprings…

view full answer...

Answer 10

The Timbren Springs part #TGMRTT35D for the 2019 Chevy Silverado 2500 have a 8,000 lb capacity are designed for service vehicles such as tow trucks. The Timbren Springs part #TGMRCK25D have a 8,600 lb capacity but as designed for heavy duty pickup…

view full answer...