Replacement Adhesive Strip for Lund Tonneau Cover

Question

Question:

I have a lund tonneau cover that I need to replace the self adhesive hook portion on bed rail. It is 1 1/4inch wide. It is a 6 1/2 ft bed. Will the a20790 work for this? It is the hook portion correct?

asked by: Edward M

1

Helpful Expert Reply:

The Replacement Adhesive Velcro Strip # A20790 is 16' long x 1-1/4" wide, and I believe that's what you were referring to by hook portion, and yes it is correct.

We do not carry Lund tonneau covers or their replacement parts so while I cannot guarantee that this replacement strip will work, I cannot imagine there being an issue with it as it has the same width as the adhesive velcro strip that you need.

expert reply by: Kyle S

1

Answer 1

The difference between 1-1/4 inches and 1-5/16 inches is 1/16 of an inch, certainly within the margin of error that can result when measuring. Even using digital or dial calipers, the flexibility of the material can skew the measurement. If you have…

view full answer...

Answer 2

Although we do not carry Lund tonneau covers or their replacement parts we do have velcro strips that are 1-1/2" wide in the Replacement Velcro Strip part #A30474. The velcro is 17" long which should be more than enough for your 2009 Toyota…

view full answer...

Answer 3

I have a solution for you, and the strips that you're referring to are going to come in a couple different sizes, but none of them are going to be 1-1/16" wide. The #TX1117876 strips you're referring to are 1" wide, which have the…

view full answer...

Answer 4

I went out to our warehouse to take a look at the Access Replacement Adhesive Velcro Strip #A20790 referenced in your question. The velcro strip itself measures 1-1/4 inches wide and not 1 inch. The adhesive strip is wider. For a 1 inch wide Access…

view full answer...

Answer 5

For your Karavan trailer I recommend LED tail lights #STL57RB and #STL56RB. They are a little shorter at 6-1/16 inches but they do mount on studs spaced 2 inches apart on center. they are 3-5/8 inches tall and 2-1/4 inches deep overall. I have linked…

view full answer...

Answer 6

The Replacement Adhesive Velcro Strip for Access Tonneau Covers - 16' Long x 1-1/4" Wide #A20790 is just the hook side of the Velcro. The loop side of the Velcro is attached to the tonneau cover edges.

view full answer...

Answer 7

We have the part #A20790 which is 1-1/4 inches wide and 16 feet long. This should be the correct width you would need plus more than enough length as well.

view full answer...

Answer 8

Without knowing what brand tonneau cover you have on your 2005 Ford F-250 it is hard for me to say for sure what replacement hook and loop strips you would need. But if you have a Truxedo or an Access check out the links I attached to the right.

view full answer...

Answer 9

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 10

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 11

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 12

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Replacement Adhesive Strip for Lund Tonneau Cover

Product Page this Question was Asked From

Continue Researching