Recommended Replacement Velcro Strips For A Tonno Pro Lo-Roll Tonneau Cover

Question

Question:

Apparently Replacement Velcro for Tonno Pro Lo-Roll Tonno Covers # TPLR-VELCRO us no longer available. Do you sell an equivalent that would work? Im looking specifically for the hook side.

asked by: Lars K

1

Helpful Expert Reply:

Since the Velcro strip in your Tonno Pro tonneau cover is 1-1/4" wide you could slide it out and use the Replacement Adhesive Velcro Strip for Access Tonneau Covers # A20790. This strip has an adhesive backing to help secure it to the railing of your cover.

expert reply by: Kevin C

1

Answer 1

Since the Velcro strip in your Tonno Pro tonneau cover is 1-1/4" wide you could slide it out and use the Replacement Adhesive Velcro Strip for Access Tonneau Covers #A20790. This strip has an adhesive backing to help secure it to the railing…

view full answer...

Answer 2

I have a solution for you, and the strips that you're referring to are going to come in a couple different sizes, but none of them are going to be 1-1/16" wide. The #TX1117876 strips you're referring to are 1" wide,…

view full answer...

Answer 3

The TruXedo Shur-Bond Velcro Brand Fastener part #TX1115174 comes with both the driver and passenger side as you can see in the attached review video. The Shur-Bond Velcro is designed for both TruXedo Lo Pro QT and TruXedo Original Edge tonneau…

view full answer...

Answer 4

I spoke to my contact at Horizon Global. He said it is acceptable to mount the Bulldog Powered-Drive Kit #BD1824200100 to the slave jack itself. He also said that if you need to switch the motor wires to make it work correctly, that would be fine, as…

view full answer...

Answer 5

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 6

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 7

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Recommended Replacement Velcro Strips For A Tonno Pro Lo-Roll Tonneau Cover

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching