Yakima Hitch Bike Racks Review - 2021 Hyundai Santa Fe Video

From the research I did the easiest way to determine if you have a tow package would be to check to see if your 2009 Hyundai Santa Fe has a transmission cooler mounted in front of the radiator. A transmission cooler looks basically like a miniature…

You may be able to use a wiring harness like the Draw-Tite T-One Wiring Harness, #118258, on your 2009 Hyundai Santa Fe, however, you will first want to determine if your vehicle was equipped with a tow package. If your Santa Fe was not equipped with…

I walked out to the warehouse and pulled the Draw-Tite Custom Fit Vehicle Wiring #118258. This wiring kit uses a 10 amp fuse in the yellow fuse holder. I have linked instructions for the Draw-Tite Custom Fit Vehicle Wiring #118258.

The Tow Ready T-One harness you referred to is a fit for the 2007-2012 Hyundai Santa Fe. The harness is designed to attach to two connectors located under the vehicle that are pinned to the underside of the vehicle behind the passenger side rear…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…