What Size Fuse Does The Draw-Tite Custom Fit Vehicle Wiring # 118258 Use For 2008 Hyundai Santa Fe

Question

Question:

what size fuse is in tow ready t-one vehicle wiring harness by draw-tite for a 2008 hyundai santa fe.

asked by: Manny

0

Expert Reply:

I walked out to the warehouse and pulled the Draw-Tite Custom Fit Vehicle Wiring # 118258. This wiring kit uses a 10 amp fuse in the yellow fuse holder.

I have linked instructions for the Draw-Tite Custom Fit Vehicle Wiring # 118258.

expert reply by: Reno H

0

Answer 1

From the research I did the easiest way to determine if you have a tow package would be to check to see if your 2009 Hyundai Santa Fe has a transmission cooler mounted in front of the radiator. A transmission cooler looks basically like a miniature…

view full answer...

Answer 2

You may be able to use a wiring harness like the Draw-Tite T-One Wiring Harness, #118258, on your 2009 Hyundai Santa Fe, however, you will first want to determine if your vehicle was equipped with a tow package. If your Santa Fe was not equipped with…

view full answer...

Answer 3

The Tow Ready T-One harness you referred to is a fit for the 2007-2012 Hyundai Santa Fe. The harness is designed to attach to two connectors located under the vehicle that are pinned to the underside of the vehicle behind the passenger side rear…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 12

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

What Size Fuse Does The Draw-Tite Custom Fit Vehicle Wiring # 118258 Use For 2008 Hyundai Santa Fe

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching