etrailer Trailer Hub And Drum Assembly Reivew Video

You already did all of the work here by finding the bearings. Since you have a #25580 inner and #15123 outer bearing the Easy Grease Trailer Hub and Drum Assembly for 6K Axles #AKHD-655-6-G-EZ-K will work as a replacement. The only other thing to…

It does! I checked with Lippert for you and the exact replacement that matches up with your 814202 hub is the part number you listed: - Easy Grease Trailer Hub and Drum Assembly for 6K Axles #AKHD-655-6-G-EZ-K

I attached a picture that shows the dimension you are looking for on the trailer hub #AKHD-655-6-K. You'll note there are two different size caps that come with the hub.

The #AKHD-655-6-EZ-K hub would arrive with the grease seal, the races and the inner and outer bearings installed. The bearings are already packed with grease, so the hub is ready to install. I'd recommend using some additional all-purpose marine…

Brake Assemblies like the Hydraulic Brake Kit - Uni-Servo - Free Backing - 12" - Left/Right Hand Assemblies - 5.5K to 7K item #AKFBBRK-7 will have the description in the title that the brakes are free backing. We also offer the same size free…

I have a few options for you to help with identifying the hubs on your trailer. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find…

The Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 8 on 6-1/2 - 9/16" Studs #8-219-13UC3 will fit on your Lippert axle. They use the same size bearings and seal.

Dexter hub drum assembly #8-219-13UC3 is a replacement for your hub drum according to my contact at Redneck Trailer Supply. This is rated for 7K, has a 8-on-6-1/2 bolt pattern and 9/16-inch studs. You can also identify compatible replacement…

In order to select a correct replacement hub for the damaged unit on your Jayco 5th Wheel trailer you will need to match several identifiers from the original. First, you will want to note the axle capacity, which is usually found on a sticker or…

We don't have that exact part number but for basically the exact same hub except made by Dexter you'd want the part #8-219-13UC3. This is the sam 6k-7.2k hub with an 8 on 6-1/2 inch bolt pattern that uses 9/16 inch studs just like the one you…

We do have 12 inch drum brake assemblies that are designed for surge brakes like the part #AKFBBRK-7-D that is Dacromet coated and comes with a left and a right hand assembly.

Based on what you mentioned it sounds like you are in need of a 12 inch brake assembly set like the etrailer set part #AKFBBRK-7-D. This is a hydraulic drum brake set that is free-backing which means that your surge brakes won't activate when…