Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Galvanized hub-and-drum assembly is great for marine use. For electric or hydraulic brakes. Fits 6,000-lb axles with #42 spindles. Inner bearing (25580) and race, outer bearing (15123) and race, seal, grease cap, wheel bolts, and lug nuts included.
Features:
Specs:
This trailer hub-and-drum assembly has a zinc coating that resists corrosion, making it ideal for use on your boat or snowmobile trailer. All GAL-DEX hubs and drums undergo a test in which they are sprayed with a 5-percent salt solution to determine corrosion resistance over time. These products are able to withstand 500 hours of constant exposure to the saltwater mist. This 500-hour salt spray rating indicates that a product is not only durable enough to last in freshwater environments, but it can also be used on trailers that come into contact with saltwater.
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: "8 on 6-1/2" means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: "5 on 4-1/2" means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Dexter Galvanized 12-inch trailer hub and drum assembly for 6,000 pound axles. Has the six and 5 1/2 inch bolt pattern. Now this is a marine grade trailer hub and drum assembly. It'll provide the surface area for your brake shoes to grip when your brakes are activated. And if I spin this around just to show you the back of it right here, you can see if you're using the hydraulic drum brakes, then the shoes are gonna apply right here.
If you're gonna use it with the electric brakes, then you're gonna see where the magnet will apply right here. So this is compatible with both electric and hydraulic drum brakes. And if you notice, this part does come with all the extras there that I have laid out on the table. It'll come with both the inner and outer bearings. Comes with the bearing races that are already pre-installed into the assembly.
Comes with the grease seal. Comes with the grease cap, and it comes with six of the half inch by 20 size lug nuts for attaching your wheel and tire assembly to this. Now the part numbers for all these parts if you do want them, they are listed on the product page at the bottom of the page. Now this is a sturdy iron construction. If you notice it uses a Gal dex finish on it, which is actually a zinc coating that has a 500 hour salt spray rating.
So this is ideal for use on a boat or snowmobile trailer and it's durable enough for saltwater applications. Again, the application for this one is 6,000 pound trailer axles with the number 42 spindle. The wheel sizes that'll fit on this is 14 1/2 inch up to 16 1/2 inch diameter. The drum dimension, if we spin this around again, the dimension on this, if we measure inside this side to this side, is gonna be 12 inches. The width of two inches is gonna be the width right here and this will work with 12 inch by two inch brake assemblies.
Now the bolt pattern on this, spin it back around to the front here, you can see as a six on five 1/2 inch bolt pattern. The wheel lug size that fits on this is a 1/2 inch by 20 and the weight capacity on this is 3000 pounds per assembly. So when used with one on the other side, it'll meet the 6,000 pound axle rating. But that should do it for the review on this Dexter Galvanized 12-inch Trailer Hub and drum assembly for 6,000 pound axles with the six on 5 1/2 inch bolt pattern.
Average Customer Rating: 5.0 out of 5 stars (4 Customer Reviews)
Galvanized hub-and-drum assembly is great for marine use. For electric or hydraulic brakes. Fits 6,000-lb axles with #42 spindles. Inner bearing (25580) and race, outer bearing (15123) and race, seal, grease cap, wheel bolts, and lug nuts included.
I replaced the entire triple axle suspension on my 5 wheel with your products. Everything went well and I’ve had no problems with the updates.
Product has held up remarkably; I trailer only so there are weekly drops for the boat.
Last year was lighter then normally but all in all better then I though they would last.
Product is good quality, it was just what I needed, And fast shipping would definitely order from again and recommend to family and friends.
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Erick K.
5/19/2021
Product is still working great,holding up so much better then other hubs Ive gotten in the past from other dealers or auto parts stores