Stromberg Carlson RV Folding Handrail Review Video

The connection on the Seaflo Submersible Utility Pump #SE54FR is designed to fit a hose with an inner diameter of 13 mm.

The folding mechanism of the Lend-a-Hand Extra Large Folding Grab Handle #AM-533 is a spring loaded mechanism that moves up to allow it to fold to either side. If you wanted to lock this out it would be a matter of preventing the handle from moving…

The darkened panel on the Lippert Thin Shade Complete Window Kit Item #LC806621 is made of glass and not a plexiglass or other kind of plastic.

The SolidStep Manual Fold-Down Steps for 26" to 29-7/8" RV Door Frames - Quad - Aluminum #LC791574 will work fine with most screen door bars like the Camco Deluxe RV Screen Door Cross Bar - 21-1/4" long to 28-5/8" long - Aluminum…

On the install bracket the install holes measured from center to center from top to bottom is 1 inch. From left to right on center is 1-1/2 inches. The distance from the center of the top bracket to the bottom bracket is 23-1/2 inches. The install…

I confirmed with my contact at StrombergCarlson that their Lend-a-Hand Folding RV Handrail, part #AC-300, and the similar aluminum version, part #AM-200, can both fold either to the left or to the right. These two products differ in that the AC-300…

Your concern about being potentially trapped inside your RV is certainly a valid one, and also a common one with the Stromberg Carlson Lend-a-Hand. While there isn't a way to easily stop it from pivoting across the front of the door, there truly…

I've confirmed with Ventline that the #BVD0434-31 screen is the correct replacement screen for the VD0434 roof vent in your truck camper.

The correct torque for installing lug nuts on your 5 X 8 trailer's 5-lug wheels will depend on the size of the lugs. For a 1/2-inch lug the torque spec ranges from 75- to 85-ft-lbs. For a 9/16-inch lug the torque spec ranges from 135- to…

Trailer ramp door springs are generally chosen based on the inside width of the trailer where it will be installed. Also, ramp door springs such as #362SA6 can be trimmed down some if the length is too much for the trailer. This is the shortest…

The Conventional Ramp Door Spring for 6' Wide Enclosed Trailer part #362SA6 is designed for 38" to 69" wide trailer doors so this is what you'll want to use. The bar will actually be trimmed to fit your exact width.

For enclosed trailer ramp/doors the best option is the style of spring that mounts to the top of the rear door frame and pulls the ramp up like the Enclosed Trailer Ramp Spring #362SA6. The Gorilla Lift you mentioned only works on utility trailer…