Ultra-Fab 5th Wheel King Pin Tripod Stabilizer Review Video

Ultra-Fab products like the Ultra-Fab 5th Wheel King Pin Tripod Stabilizer - Steel #UF19-950600 are made in Elkhart, Indiana.

The Everchill Refrigerator #324-000119 that you referenced comes with a 1-year warranty from the manufacturer. This is a really nice 12V refrigerator perfect for RV/trailer applications and it has a storage capacity of 10.7 cubic feet.

I have the perfect solution for you! I recommend going with the Ultra-Fab 5th Wheel King Pin Tripod #UF19-950500 and then adding the Replacement Ball Assembly #UF19-001057. This will convert the tripod so that you can use it with the Andersen coupler…

Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer #UF19-950500 should be used to supplement the existing leveling system on a trailer whether it is manual or automatic. What you would do is operate the leveling system on the trailer like you…

Ultra-Fab 5th Wheel King Pin Tripod Stabilizer #UF19-950001 has a height range of 37 inches to 50 inches and a capacity of 5,000 pounds. The distance from the ground to the pin box skid plate where the king pin is attached would need to by within the…

The extension pieces you referenced, part #UF19-950002 and #UF19-950202 do no fit the #UF19-950500 that you also referenced. The #UF19-950002 is designed to fit the #UF19-950001, and the #UF19-950202 is designed to fit the #UF19-950200.

The Ultra-Fab 5th Wheel King Pin Tripod Stabilizer part #UF19-950200 would be best for harsher environments. The Ultra-Fab 5th Wheel King Pin Tripod Stabilizer part #UF19-950600 has a black coating which will also resists rust but if this coating…

The Patriot Slider part #BWRVK3270 might be a bit more noisy than the Companion slider part #BWRVK3400 due to the increased number of mounting points, 4 at the corners vs. 1 in the center. Probably not that noticeable and certainly not something…

Most fifth wheel rails are made to the same industry standard dimensions. They aren't all though. If you measure 22 inches on center between the two rails and they look like the rails of the #RP30035 that you referenced they would be the industry…

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

I have a solution for you, but the Rear View Safety Backup Camera #RVS-917619P is a universal fit item is not designed to be a replacement for your existing 3rd brake light, so it may not be the best solution. Although it won't replace your 3rd…

You can use Stromberg Carlson Replacement Aluminum Gearbox #LG-179015 to repair your LG-151 landing gear. This item, shown in the linked review video, fits Stromberg Carlson, Atwood, Lippert and Venture landing gear sets.