Stromberg Carlson Lend-a-Hand Extra Large Folding Grab Handle Review Video

I'm not quite sure what you got going on but what I can tell you is that in order to install the MORryde Safe-T-Rail Telescoping RV Hand Rail #MR54BR you're looking at, you are going to need: -No trim or obstructions including around a…

We don't have any way of knowing the measurements of the holes on your 2023 Reflection, so you'll need to do some measuring to determine the fit of the Lend-a-Hand Extra Large Folding Grab Handle for RVs #AM-533. The #AM-533 uses mounting…

The Lend-a-Hand Extra Large Folding Grab Handle for RVs - Black with Black Foam Grip - Aluminum #AM-533 have brackets that have three holes in each. I went out to our warehouse to measure for you and the holes from top bracket to bottom bracket are…

The shim kit part #5991-SM is designed to push the handle part #AM-533 out a little further from the body of the RV so that it can close around a door that sticks out further from the outer wall. So if your door closes mostly flush with your RV wall…

There are only a couple differences between the #RVSTLB60 and #RVSTLB0060 trailer lights. The #RVSTLB0060 features a ONE Series LED light which is brighter than traditional LED lights. The light measures 8-5/8 inches long. The #RVSTLB60 has 9 LED…

The SumoSprings Trailer Helper Springs item #SS26MV require 5-5/16" - 6-1/2" of clearance. This is from the top of the spring plate to the bottom of your trailer. Since you are right at 5" you should be ok once you jack your trailer up…

The Lend-a-Hand Extra Large Folding Grab Handle #AM-533 has a distance of 19.5" from the bottom of the top mounting bracket to the top of the bottom mounting bracket. It appears that the measurement Stromberg has on their site is in reference to…

Yes, unfortunately! If some rapscallion happened to close the Lend-a-Hand Extra Large Folding Grab Handle for RVs #AM-533 over your door while you were still inside, you'd effectively be trapped. You can see at the 0:50 mark in the video attached…

Yes, the SumoSprings Trailer Helper Springs #SS26MV does work with your spring plate design. What you have is the standard design as the bends help provide additional support for the plate.

When installing the Sumo Trailer Springs #TSS-107-40, is very important as the Trailer SumoSprings provide the maximum level of vibration reduction and damping with the 1/4”-1/2” preload. That being said, the measurement is extremely close and after…

Yes, the SumoSprings #SS26MV is the same as the TSS-107-47 that you mentioned.

The Stromberg Carlson shim kit, part #5991-SM, is just one shim. It's kind of misleading since it's called a kit but if you need two you do need to order two of them.