Stromberg Carlson RV and Camper Steps AM-533 Review Video

The connection on the Seaflo Submersible Utility Pump #SE54FR is designed to fit a hose with an inner diameter of 13 mm.

Trailer manufacturers don't keep records of the exact parts they have so there would really be no way to know if the Lend-a-Hand Extra Large Folding Grab Handle #AM-533 will mount exactly inline with the existing door on your Keystone…

I went ahead and did some research, and it looks like your puck pattern on your 2022 Chevrolet Silverado 3500 is actually the factory puck pattern. So with that being said, the: -Curt PowerRide 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep…

For me the Curt PowerRide 5th Wheel Trailer Hitch #C36WR does appear to be the best value. The built in lube plates help to ensure that you protect the hitch from getting marred up when connecting to the 5th wheel. And unlike some other…

I measured the brackets of the Lend-a-Hand Folding Grab Handle for RVs #AM-200 and found from the surface to the edge where the handle locks is approximately 1-5/16". Since you measured your awning support and it is 1-3/8" then you…

I do have a suggestion, because we have a gas strut with with dimensions that are the same as the Stabilus 654150 which is likely to work; the Stabilus strut measures 26.46" when extended with 120 lbs of force. The nearly identical strut…

The Lend-a-Hand Extra Large Folding Grab Handle for RVs - Black with Black Foam Grip - Aluminum #AM-533 have brackets that have three holes in each. I went out to our warehouse to measure for you and the holes from top bracket to bottom bracket are…

The mounting brackets of the Lend-A-Hand part #AM-533 that you referenced measure 2-5/16 inches wide x 3-7/8 inches in height.

The Lend-a-Hand Extra Large Folding Grab Handle for RVs #AM-533 measures 23 3/4" from the top mounting bracket to the bottom mounting bracket and the holes are spaced 1 1/8" on center. I have included a diagram showing these…

The shim kit part #5991-SM is designed to push the handle part #AM-533 out a little further from the body of the RV so that it can close around a door that sticks out further from the outer wall. So if your door closes mostly flush with your RV…

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you,…

Yes, the outriggers #LC301704 can be used to install the Flexco Manual Pull Out Steps #SMFP-2120 on your Rockwood trailer.