Review of Malone MicroSport To LowBed Trailer Conversion Support Tubes - MAL33TR Video

Yes, if you install the #MAL33TR on your Malone Microsport you'd still have the same amount of bar space to carry the same amount of kayaks as you did before. This keeps the bars still above the fenders of the trailer so you don't…

Yes, the Malone MicroSport to LowBed Trailer Conversion Support Tubes #MAL33TR will allow you to transform your MicroSport Trailer #MPG461B2 into the LowBed #MAL25FR. This will make it much easier to load your kayaks or possibly we launch them…

To add bunks, you will need the bunks, brackets, and u-bolts. Bunks - CE Smith Carpeted Bunk Boards #CE27845 Brackets - CE Smith Bolster and Swivel Bracket Assemblies #CE10000G-4 U-bolts - CE Smith U-Bolts #CE15283GA-4 This is typically done on boat…

The Malone MicroSport Trailer #MPG460G uses crossbars like what you would find on the roof of a vehicle instead of bunk boards. This is sold on our site as the Malone Crossbar Conversion Kit #MPG475 and it comes with the mounting hardware. If you are…

I can certainly help with the dimensions of the U-bolts included with the #MPG561 Trailer Bunk Kit. The inside height of the leg is 3-5/8 inches measured from the end of the bolt to the inside of the top and the span measured inside leg to inside leg…

I checked with Malone about the Malone Crossbar Conversion Kit for Standard Utility Trailer part #MPG475 and confirmed the weight capacity as 400 lbs evenly distributed.

The U-Bolts that arrive with the Malone Crossbar Conversion Kit #MPG475 Hardware Kit are 1/2" U-Bolts that 6" long & 2" wide.

The Bunk Kit for Malone Trailers #MPG561 is designed to fit the 1-1/4" Crossbars #MPG4001 currently used on Malone trailers. You can still use them with your crossbars but will need to account for the difference in size with some flat…

Yes, we do have the conversion kit. - Malone MicroSport to LowBed Trailer Conversion Support Tubes #MAL33TR The Malone MicroSport to LowBed Trailer Conversion Support Tubes #MAL33TR works to convert your Malone MicroSport or MicroSportXT trailer to a…

To convert your Malone MicroSport Trailer #MPG461GU to carry your Bote Rover SUP/Micro skiff you will need a couple parts to use it with launching at the boat ramp. First you will need the Malone MicroSport to LowBed Trailer Conversion Support Tubes…

The Malone MicroSport to LowBed Trailer Conversion Support Tubes #MAL33TR will use the same u-bolts and hardware already on your Malone MicroSport Trailer. The conversion kits work with the Malone MicroSportXT Trailer #MPG460XT, Malone MicroSport…

Since you already have the Malone MicroSport Trailer - Galvanized Steel - 13' Long - 78" Crossbars - 800 lbs #MPG460G already comes with the Malone Crossbar Conversion Kit for Standard Utility Trailer #MPG475. It sounds like you are just…