Lippert JTs Strong Arm Travel Trailer Jack Stabilizer Kit Review Video

I recommend to add Leveling Scissor Jack Set - 24" Lift - 10,000 lbs - QTY 2 #JSC-24 to the Rpod which will give you about 24" of height. When collapsed the jacks are 4" which is about 3/4" shorter than the other options to help…

The JT's Strong Arm Jack Stabilizer Kit for Travel Trailers #LC191025 only comes with 6 sets because the a majority of the weight of the trailer is supported by the axles/wheels which are towards the end of the end of the trailer, so only one…

As we do not carry the Lippert brakes, I cannot say for sure what is going on as I have not had the chance to mess with them before. However, if you had say an etrailer.com Left Hand Self-Adjusting Electric Trailer Brake Assembly #AKEBRK-7L-SA, I…

Yes, you can manually adjust self-adjusting brakes with a spoon like the drum brake spoon #W80630. If you let me know what is going on with your brakes I can try to help you troubleshoot why your brakes need to be adjusted.

Adjusting self-adjusting brakes is going to be a lot more difficult than manual adjusting ones due to the starwheel and how the self adjusting cable is attached. The procedure listed in Connor's answer is what has been relayed to us by Lippert as…

The kind of sway/bouncing that you described right at 55 miles per hour is due to improper trailer loading nearly every single time. You want to have your tongue weight equal to 10-15 percent of the total trailer weight otherwise you will get sway.…

With the JTs Strongarm kits like the #LC191025 you actually only install one bar on each scissor jack so this kit would come with enough. It's the landing gear jacks that normally get two bars each.

On the front landing gear legs of an RV you install two of the JT's Strongarms of part #LC191025 like what you see in the attached picture and install video. This is why the kits come with 6 arms total. Four for the front and 2 for the scissor…

To clear this matter up I took a walk to the warehouse to measure the Replacement Cam Lock Cylinder for RVs - 1-1/8" Long #295-000004 and found that the measurement is taken from the threaded portion of the cylinder. Cylinder #295-000004…

I went our to the warehouse to measure the eye to eye distance on the arms of the JT's Strong Arm Jack Stabilizer Travel Trailer Kit #LC191025. From the center of one eye to the center of the other it was exactly 26 inches.

Two of the bars that come with the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers #LC191025 install on the front landing gear legs like you can see in the attached picture and install video link on this page and the other two install on…

The other end of the JT's Strongarm part #LC191023 has a wider lug spacing to allow the #LC191023 to install into. You are trying to install the kit on the end that is narrower.