Retracted Length of Arms in Strong Arm Jack Stabilizer Travel Trailer Kit # LC1910

Question

Question:

I am planning to install a set of the JT supports on my 5th wheel. I need to know the closed length, eye to eye so I can ensure they will fit. I have several things mounted under the 5th wheel that will interfere. How long are the supports ?

asked by: Tim T

0

Expert Reply:

I went our to the warehouse to measure the eye to eye distance on the arms of the JT's Strong Arm Jack Stabilizer Travel Trailer Kit # LC191025. From the center of one eye to the center of the other it was exactly 26 inches.

expert reply by: Michael H

0

click to enlarge

Answer 1

For your 2019 Jayco Jay Flight 32BHDS with heated underbelly, the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers #LC191025 will fit and give you the stabilization you are seeking. The enclosed underbelly will not hinder the fit in…

view full answer...

Answer 2

The other end of the JT's Strongarm part #LC191023 has a wider lug spacing to allow the #LC191023 to install into. You are trying to install the kit on the end that is narrower.

view full answer...

Answer 3

Since you have electric stabilizers on your RV you would only use 4 of the arms that come with the part #LC191025. If you check out the install instructions link I attached you can see that your setup is shown in figure 3.

view full answer...

Answer 4

Two of the bars that come with the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers #LC191025 install on the front landing gear legs like you can see in the attached picture and install video link on this page and the other two install…

view full answer...

Answer 5

I went out to the warehouse to measure the length of the arms when extended for the JT's Strong Arm Jack Stabilizer Kit #LC191025. From the center of the hole on one end to the center of the hole on the other end it measures 46 inches…

view full answer...

Answer 6

Yes, the JT's Strong Arm Jack Stabilizer Kit for Travel Trailers #LC191025 can be used on electric stabilizers. The Electric Stabilizer Jack Pad Adapter #LC314597 will allow you to attach the Strong Arms to the jack pad. These adapters can…

view full answer...

Answer 7

Yes the JTs Strongarm kits like #LC191025 could be used on a narrower frame width trailer frame like yours that has 56-3/4 inches between scissor jacks.

view full answer...

Answer 8

The bar holding up your water tank wouldn't be a useable crossmember since it's just there to hold the tank up and isn't as structurally sound as an actual frame beam to handle to pressure the JT's Strong Arm Jack Stabilizer Kit…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Retracted Length of Arms in Strong Arm Jack Stabilizer Travel Trailer Kit # LC1910

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching